How To Fix Rust Holes In Your Car The Right Way

Рет қаралды 685,920

1A Auto: Repair Tips & Secrets Only Mechanics Know

5 жыл бұрын

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/48/b/rust-repair-panels
In the video, 1A Auto shows how to cut out, patch and finish a rust hole or otherwise damaged body panel. The video is applicable to all steel paneled vehicles.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaDI/1AXAA00013
• Cutoff Wheel 1aau.to/oU/1AXAA00254
• Vacuum
• Welder
• Welding Helmet
• Welding Magnet
• Metal Cutters
• Acetone
• Body Filler
• Dust Mask 1aau.to/oj/1AXSS00057
• Gloves 1aau.to/ope/1AXSS00048
• Marker / Writing Utensil
• Painter's Tape
• Paper Towels 1aau.to/orG/1AXSS00035
• Safety Glasses 1aau.to/okb/1AXAA00343
• Sandpaper
• Spray Paint
• Spray Primer
• Bucket
• Cardboard
• Grinder
• Hammer 1aau.to/oCS/1AXAA00091
• Plastic Sheet
• Sanding Block
Subscribe: / @1aauto
Check out our playlist:
Driveway Diagnostics!: • Driveway Diagnostics!
Body Repair - Dents, Dings, Scratches and Rust: • Body Repair - Dents, D...
Tips & Secrets only Mechanics Know: • Tips & Secrets only Me...
For More Info visit us at 1aau.to/h/bzE/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 568

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@billyralston5291 3 жыл бұрын

THIS GUY IS AWESOME. YOUR FORTUNATE TO HAVE HIM AS AN EMPLOYEE!!

@cinderswolfhound6874 3 жыл бұрын

Rough up the metal so the weld sticks to it you lame brain you are about to melt the metal together not glue it

@patcollier4819 2 жыл бұрын

if this guy worked for me he would now be collecting unemployment. hes a backyard mechanic and not a good one at that. how embarrassing to post something as poor as this to the net

@davidobrien3897 Жыл бұрын

Love how you are so humble and admit minor mistakes/errors.... very relatable !!! My first autobody effort was a disaster !!!!

@tnoutside 4 жыл бұрын

A bunch of critical comments here. This is not a video for body work professionals. This is for those of us that have an old vehicle with rust, a replacement panel, a grinder, welder and rattle cans. I will be doing a similar repair on my 20 year old Jeep in a couple of days with the same tools. This was a nice prep for someone like me who is a novice and will most certainly screw it up all sorts of ways. And I will incorporate a couple of the suggestions in the comments. Thanks for the video. If my repair looks as good as yours it will be a heck of a lot better than a rust hole. Not for inspection. Just to make me happy.

@mback12000 4 жыл бұрын

Friendly Suggestion - spray some weld-through primer on the back of that patch before welding because if not, the entire inside of that patch is raw uncoated steel and will rust through super fast.

@linmal2242 3 жыл бұрын

You mean he didn't paint the back? What a shonky job by a shonk worker!

@aaronanderson5197 3 жыл бұрын

@@linmal2242 they dont paint the backsides of panels from the factory

@nexpro6985 3 жыл бұрын

@@aaronanderson5197 the whole body shell is dipped in anti corrosion treatment before paint at the factory.

@crforfreedom7407 3 жыл бұрын

Why worry about all that with rust and rust-through on the back-panel? I mean, this wasn't exactly the repair to eliminate rust repair, just pure window-dressing.....

@terrysullivan9831 2 жыл бұрын

Wouldn't it have made sense to rust- protect any metal accessible before welding on the patch? That includes putting some sort of rust-stop treatment on the inner rust that he found?

@dwhollrah 4 жыл бұрын

Title should read " Patching rust to get through Inspection."

@cameronlee4386 4 жыл бұрын

dwhollrah title should read how to fix a rust hole the wrong way so that it eats out the inside of your car without you knowing.

@ricksanchez8469 3 жыл бұрын

Yeah and how would you do it then?

@foreverwood1963 3 жыл бұрын

LOL

@e36fanatics 3 жыл бұрын

for most people there is no point paying whats car worth just to get it trough inspection my dude

@wizen4937 3 жыл бұрын

ya wtf. def. not the right way with that patch behind it left

@crforfreedom7407 3 жыл бұрын

I thought this was an EXCELLENT introductory video for people new to body work!! All the fundamentals are here to get the job done right. WHAT A MAN FOR USING A FLUX-CORE WELDER!!! First time I've seen that! Everyone ALWAYS uses shielded, but if a rookie is borrowing a welder, there is a good chance they might be using flux-core! Excellent! Made the repair just a little tougher but real-world! Nice presentation, overall very well done!!

@gordontallent4779 7 ай бұрын

You always remove the rust underneath and spray it with a rust inhibiter so you will not have it return!

@donaldshidal851 3 жыл бұрын

Cant believe you hid that rust underneath without killing it first.

@hunkydude322 2 жыл бұрын

it's not like it's a half million dollar car.

@ianbaker9287 2 жыл бұрын

Hunkydude322 regardless!!!

@TheCriticalChris 4 жыл бұрын

I like that you used a flux core welder, which are the more affordable welding machines that many DIY novices use.

@ColinDies 4 жыл бұрын

Man it's such a good video, but you left some pretty important stuff out. It's understandable that you're not restoring the car, but a proper repair is a proper repair no matter how you cut it. Any less is a shortcut. First - once you cut out that piece, finding more rust behind, applying a rust inhibitor would've taken hardly any extra time and would've helped kill the cancer where it was. When sanding the primer, never use your finger tips. Always use a block. Use a soft-ish block if you need to, but even a sponge can sometimes mess it up (you don't want ripples/finger lines in your freshly leveled surface). Once you're done apply the clear, you've got more sanding to do, and if you don't, the finish is going to look dull, and won't feel very smooth to the touch. Apply a few coats of clear (3-5) so you have a little thickness to work with, and block sand that sucker starting at 600, 1000, and then finally 1500 or 2000. Then you polish. THEN you're done. :) It's a good video, but those little things above can help you go from an ok result to a good result (let's face it, Duplicolor's never going to look excellent).

@1AAuto 4 жыл бұрын

+Colin Dies Thank you for the feedback. 1aauto.com

@dropkickfetus9710 4 жыл бұрын

@@1AAuto I do my body repair on how people pay ....this repair was lit...thanks

@thunderbirdizations 3 жыл бұрын

“When grinding the body, make sure none of those sparks hits stuff like the carpet and stuff” 12:29 proceeds to throw a bunch of sparks close range to the tire, and mig weld without covering it up 😂

@hunkydude322 2 жыл бұрын

just be thankful this guy didn't teach you how real car dealers do it out there in the real world, they take more short cuts than you can count and then some, buy next week your car's paint will be peeling and falling off LOL.

@tvviewer4500 2 жыл бұрын

@Colin Dies I can tell this guy always showed all the work on his math test.

@Overzeal0us 3 жыл бұрын

He’s like the Bob Ross of auto repair, I love watching this guy before bed. Knocks me right out.

@1AAuto 3 жыл бұрын

+Skinner Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@kcscustom9759 5 жыл бұрын

Awesome video! I love seeing people taking on projects like this on their own and this video I’m sure will help a lot of people with that👍🏼

@1AAuto 5 жыл бұрын

+Keith Chapin Thank you for the great reply! We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@kcscustom9759 5 жыл бұрын

1A Auto Parts: Absolutely, Thank you for the great videos!

@timmygilbert1371 4 жыл бұрын

I agree !

@jestertech3790 3 жыл бұрын

Though everyone says rust converter before welding is what you need, I found that spraying the backside of the panel with some fluid film/used motor oil yearly is just as good. (I realise that there aren't always access holes to get behind there)

@clydeb7713 2 жыл бұрын

Cheaper and easier way is as follows: Smooth hole. Spay rust converter. Make an aluminum foil ruled up piece to fill hole. Push it in about 1/8 inch. Spray expanding foam. When it drys, cut it with a razor. Push foam in enough to cover with fiberglass body filler. When dry, sand smooth. Paint as needed.

@dlwhite6537 2 жыл бұрын

Bingo! then inspection and sell.

@ThomasFreundl 4 жыл бұрын

The reason you really use fiberglass is to fill in the voids as it provides water proofing in that area as well, where as body filler doesn't. Also next time consider spraying a weld through zinc primer on the backside to add a little more rust resistance. A very easy way to mask is tape some newspaper over the area and fold it back. The rolled edge allows for a more feathered edge. Also, if it's not a metallic paint you should wet sand the base coat to help eliminate orange peel. Yes you can go further, but some things are easy to take another few minutes to just give it a better looking job in the end.

@1AAuto 4 жыл бұрын

+Thomas Freundl Thanks for checking us out and providing some additional tips!

@LiezerZero 4 жыл бұрын

State Inspection for body rust.... LOL, glad that's not my state.

@just456bc 4 жыл бұрын

Valueless Dollar I think it’s more for holes

@4dirt2racer0 4 жыл бұрын

yea their all paranoid about exhaust gases getting in...

@AwakeDude911 4 жыл бұрын

@jmaedl027 jmaedl how many lifes has this saved since this LAW was made? OR how many dollars did this make for the body shops since the law ..now that you can track...

@gibmelson7628 3 жыл бұрын

Valueless Dollar hoho ! in germany you have to bring your car ans others to a great technique inspektion all two years.inspectors are engineers and find the littlest problem. you pay around 70 $ and max 4 weeks later all problems must be repared. if not the police take the car away.... germania !!

@zrafferty 3 жыл бұрын

I live in nys only thing that can't have rust holes is the frame

@robbflynn4325 2 жыл бұрын

Thanks for this video. Some of us are on a very strict budget and are not restoring classic cars or whatever and just want to keep our old cars on the road to pass inspection!

@logothaironsides2942 4 жыл бұрын

Looks good. Fortunately car bodies seem to be less rust buckety than before anyway but its always good to see how to do stuff. Would have liked to hear what the settings were on your welder. Mine just has high/low/1 and 2 and the speed dial.

@KenMrKLC 4 жыл бұрын

Pretty good vid... about how I would do it, I would have given a quick scuff and spray with rust convertor on the inner rust however. It killed me to watch it get covered up

@1AAuto 4 жыл бұрын

+KLC LAWN & LANDSCAPING Thanks for the comments and for watching!

@brettlyde6338 4 жыл бұрын

Jesus Buford you should have at least sprayed that rust with some Rust Converter after you hit it with a wire brush and covered it up with some primer

@FiscalRangersFlorida 4 жыл бұрын

I agree - this is like the lazy man's "let's do a cheap job to let the next buyer worry about recurring rust."

@linmal2242 3 жыл бұрын

Yes, my sentiments exactly, convert that rust and paint it to arrest further grief!

@panchoperodo4310 3 жыл бұрын

Wow... Not even some ospho ??

@gehringer37 2 жыл бұрын

I love this guys personality!!! Awesome!!!

@1AAuto 2 жыл бұрын

+Mikes Garage Thanks for the feedback!

@TonyPablo 4 жыл бұрын

Excellent presentation!! thanks

@ewallacestudent1 4 жыл бұрын

1A Video's actually show the how to do it, love you guys.

@1AAuto 4 жыл бұрын

+Edward Wallace Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@gthree0239 3 ай бұрын

Very soon I’m going to tackle an auto body repair. In fact this minivan is going to give me lots of practice. Rusty hood, tailgate, fenders, quarter panels, doors, rockers, inner rockers and probably a few other things. Is it worth fixing? Well, yes and no. It’s practice for me, it’s my kids first set of wheels and it still runs decent so why not. Thanks for the simple explanation.

@SlightlyDank 4 жыл бұрын

nice vid! we use 2 big putty knives to mix the filler on, my UK teacher says they use cardboard in the UK. that fibre filler is for the really rough jobs but it works great if you wanna fill up a lot in a short time, i some times mix the fiber filler with the regular filler so it gets more flowing when applying (this is an old trick i guess) i was watching this vid cause i was wondering how others did it, might wanna drill hole somewhere unseen in that panel and spray it full undercoating r something like that since the rust was in there than you fill that hole you drilled up with some 2 component body glue/kit (you need to get the job done right aye! ;D)

@bobbybenn8275 4 жыл бұрын

Great video sir, thanks for sharing. I'm a novice at this and every little bit helps. Keep up the good work

@1AAuto 4 жыл бұрын

+Bobby Benn Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@beachwalker2574 Жыл бұрын

I don't know if you intentionally made mistakes if you did that helps even more ! What not to do !! Great video ! will start mine next month !!!

@johnsteed265 Жыл бұрын

This is excellent beginner advice for a great patch. Very easy to follow steps. Thanks for the information!

@Hereford1642 Жыл бұрын

Channel - Fitzee's Fabrications - has better advice I think about shaping your metal before you cut out the rust and many examples.

@bcatz454 5 жыл бұрын

Looks like the many hours of how I'll be spending summers after work and weekends on my old Land Cruiser.

@1AAuto 4 жыл бұрын

@sc14 thanks for watching!

@TheWanderer2527 3 жыл бұрын

watch different videos to do it right

@tenbears1648 2 жыл бұрын

The description says DONE RIGHT. To do it right, you try and kill as much of the rust as you can, so it doesn't cause the patch to rust again.

@ryanphotostudio 2 жыл бұрын

Great video! Perfect amount of information, thanks so much 👌

@Imwright720 4 жыл бұрын

A little rust converter would go a long way in slowing the hidden rust. Minimal work for maximum results.

@jagers4xford471 4 жыл бұрын

That interior rust under the patch needed to be sprayed with rust reformer. Once the rust has been chemically treated seal the area with a sealer such as Mad Dog to keep any moister out and rust from reforming. While you have it open, you might as well.. Not to do that is like changing a clutch and not bother to replace the throw out bearing.

@1AAuto 4 жыл бұрын

+Jager's 4xFORD Thanks for the tip! We'll pass this info along to our production team.

@juanalejandro9877 3 жыл бұрын

Great video for us non experts. And, useful comments/suggestions from those more experienced. Overall, extremely helpful video.

@1AAuto 3 жыл бұрын

+Juan Alejandro Thanks for checking us out!

@patfromamboy 8 ай бұрын

@@1AAutoI’d like to repair rust and not have it ever return. 5-10 years goes quickly now that I’m 61. My 66 Chevelle bucket seats need to be rebuilt again. It seems like I just had them restored but it was 40 years ago which is scary. In another 40 years I’ll be 101.

@johnd.dupree8614 4 жыл бұрын

Great video! I think a rust converter would have done the trick for the inside surface rust. Just suggestion.👍

@CCROSS5882 3 жыл бұрын

I thought the same thing not sure if the welding would effect it but should be better than not!

@dougbesplug8851 3 ай бұрын

Very nice video for the average guy I watch the 1A videos a lot just did an Altima video before replaced alternator very helpful

@rjinnh3933 3 жыл бұрын

Very good vid! No Music/No Drama. Just good Instruction presented in a Cool/Calm and Adult manner. All very normal for A1-Auto.....

@1AAuto 3 жыл бұрын

+RJinNH Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@beowulf39565 4 жыл бұрын

Great video but if I lived in a state that required a rust hole to be fixed before you got an inspection sticker I would just move to another state.

@ericjkent 3 жыл бұрын

Well it must be nice to be able to just pick up and move

@rodrogers6895 4 ай бұрын

Using a flange tool to create an ‘indent’ in the body, and then using panel bond to glue the patch eliminates the welding. Lots of videos on doing that on KZfaq.

@davidcover9591 4 жыл бұрын

what width wire for the flux core and gauge metal did you use for the welds? I've got a fluxcore too but I'm worried about burning through the sheet metal

@kabaottoemulsion1869 3 жыл бұрын

Thank you so much! Now I know how to fix small holes! Brilliant!

@davef4163 Жыл бұрын

Really nice tutorial video. Very informative, well done!

@garynokes729 Ай бұрын

Nice work, very helpful video.

@Tuner9069 7 ай бұрын

Spot welds spaced 1" apart won't prevent warping when welding. Warping is due to the metal being exposed to high Temps. If you want to avoid warping then air cool the each tack weld/bead immediately after laying.

@jakelancaster4811 4 жыл бұрын

Good video. I have a 1977 gmc jimmy that has like four or so rust spots like the one in this video.

@Mylife-md1zv 4 жыл бұрын

Awesome just what I was looking for simple fix thanks

@raullcalzadilla3541 3 жыл бұрын

Great video, thank you. It's a lot of work for such a little hole but now I know I can do this.

@1AAuto 3 жыл бұрын

+Raul L Calzadilla Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@ortiztaxi1055 Жыл бұрын

My rust is way worse on that side on my 04 explorer What would you recommend to repair it? I mostly have a huge hole and also on the driver side passenger door.

@boatman888 Жыл бұрын

I am going to give it a go, see if I can repair it on the lift. I liked your instructional video and think I can follow these instructions.

@billhill839 3 жыл бұрын

Growing up in Pa as a teenager I had to get my car inspected every six months. What a pain in the ass. I must of had a hundred pounds of bondo on my cars then. One of the nice things about moving to Ohio in my twenties was no more inspections.

@linmal2242 3 жыл бұрын

How slack are they in Ohio then? Yes, not near the coast, but.....

@seancorrigan4946 4 жыл бұрын

Tips form an old body man who started in 1972: First treat the rust and second all patches should have round corners not square,

@liambyrne591 4 жыл бұрын

Round patches, very difficult

@michelleray8428 3 жыл бұрын

Can you explain why it's better to have round corners?

@flumpaustin1994 2 жыл бұрын

@@liambyrne591 Rounded corners!

@happydays454 4 жыл бұрын

Good to go good job ready for inspection

@donaldmorrison5289 6 ай бұрын

Great job very nice patient explanation.

@jeepman012 4 жыл бұрын

Nice Job, Thanks for the tip's.

@1AAuto 4 жыл бұрын

+jeepman012 Thank you for your feedback! We are very proud of our videos, and have more coming out every day.

@davidg5704 4 жыл бұрын

Sponge idea is great. I bought thin 3m sponge sanding squares but kitchen sponge probably work just as good. Thank for video.

@1AAuto 4 жыл бұрын

+David Ahders Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@hmooblee1988 2 жыл бұрын

Anybody notice that at the 20 minutes and 35 seconds mark until 22:35 mark that he was careful not to say or show 3M body filler? He even turn so that the can is not facing the camera..... Hahaha yeah I got that!

@lowhertzhighspl 4 жыл бұрын

Excellent video

@jimcameron4672 Жыл бұрын

Great instruction video

@Thunderpalm510 4 жыл бұрын

Nice video, thanks for sharing.

@1AAuto 4 жыл бұрын

+Ken Bloom Thank you for the feedback and for watching!

@rob12449 4 жыл бұрын

a lot of critical comments... but if the rust on the inside is there because of the rust hole than sealing up the hole might stop the inside. yes i would have cleaned and treated the inside. on the other hand if the rust came from the inside to the outside then it's a totally different matter, it will keep growing. anyway I enjoyed the video, and you need to watch a lot of guys doing this repair to decide which way to go.

@TheOzthewiz Жыл бұрын

"RUST NEVER SLEEPS"!

@crforfreedom7407 3 жыл бұрын

All these great videos is why I order my parts from A1. Excellent customer service too! Love you guys!

@davidobrien3897 Жыл бұрын

You really take the time to explain al the steps well

@MrBillmedhurst 4 жыл бұрын

Great video! I've watched many body repair videos but learned more from this one. Thanks!

@1AAuto 4 жыл бұрын

+Harpo Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@chumaluf 4 жыл бұрын

thanks Dude Awsome Job

@ADESIGNMODELING Ай бұрын

Any suggestion for Primer and Finish Paint , brands , properties, where to buy ?

@patriotswillsurvive1893 5 жыл бұрын

Nice work. Body work is such a pain but so satisfying.

@1AAuto 5 жыл бұрын

Thanks for checking us out. 1aauto.com +michael shepke

@CA-pv5ie 4 жыл бұрын

Super helpful - thanks for the video

@1AAuto 4 жыл бұрын

+C A 0297 Thanks for checking us out! 1AAuto.com

@dlwhite6537 2 жыл бұрын

Thanks for this. My F-150 has a hole in the same spot. Now it's like I've seen my buddy do it first.

@danielsmit11 Жыл бұрын

I'm still wondering what wacky State fails an inspection over a non structural rust spot like that. Sure it were in the frame or floor pan that'd be a different story but that wasn't the case

@billymarques8168 9 ай бұрын

Great job!!

@kauaixtremeshorefishing1021 2 жыл бұрын

Excellent… Will I do it different? off course …. Like many others would but thankful for your time and effort

@nikaiman8068 2 жыл бұрын

Tq for sharing tips and tricks bro

@chuysz06 3 жыл бұрын

Nice job!

@davidobrien3897 Жыл бұрын

GREAT CONTENT AND INSTRUCTION

@tomeighty 4 жыл бұрын

Great video, thanks for taking the time to show the work.

@vincequaterna2283 4 жыл бұрын

This was so long. He adds to everything. Does it 3 different ways. Repeats sentences 4 times lol. Trapped the rust not even a little spray , “it will last another 10 years “ 😂🤣

@Mentalpatiencevapes 2 жыл бұрын

Thanks again guys. Awesome videos

@1AAuto 2 жыл бұрын

+MP Thanks for the feedback!

@blackenigma1054 8 ай бұрын

Good job!👍🏿

@g.pearson4726 Жыл бұрын

Great teacher ‼

@michelatef3292 4 жыл бұрын

GOOD TUTORIAL

@henrysmith8012 8 ай бұрын

Eastwood welding magnets really help. Make 2 tacks and then cool with compressed air.

@newimagedentrepair 4 жыл бұрын

Informative video!

@newimagedentrepair 4 жыл бұрын

👍🏻

@1AAuto 4 жыл бұрын

+New Image Dent Repair Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@jasonfabian1563 3 жыл бұрын

Thanks for making this video, I have to fix that same area on my 2009 Suburban

@1AAuto 3 жыл бұрын

+Jason Fabian Thanks for the feedback!

@roncolpo5056 4 жыл бұрын

Nice job

@knottreel 5 жыл бұрын

Amazing job. I didn't expect it to match so well.

@1AAuto 5 жыл бұрын

Thanks for the feedback! +Knott Reel

@LetricShave 4 жыл бұрын

What gauge metal are you using in this video? Thanks

@billalexander8011 4 жыл бұрын

Very nice!

@1AAuto 4 жыл бұрын

+Bill Alexander Thanks for checking us out! 1AAuto.com

@joespegetti5290 4 жыл бұрын

so informative, subcribed..

@1AAuto 4 жыл бұрын

+joe spegetti We're glad you enjoyed it. Thanks for the sub! 1aauto.com

@volvovalor8051 4 жыл бұрын

"You can do >this< but I'm not going to do that." * gets annoyed by not doing a great enough job and does it anyways *

@hunkydude322 2 жыл бұрын

just take it to the autobody shop and then remortage your home so you can pay the autobody shop for this type of job.

@jerryf2426 3 жыл бұрын

A&P Mechanic> Sorry, it is "ground" not "grounded". Nice video.

@jacobbaker8698 3 жыл бұрын

Awesome video

@1AAuto 3 жыл бұрын

+Jacob Baker Thanks for checking us out! 1AAuto.com

@newsnowtwincities9331 4 жыл бұрын

It's important to note that when you disconnect the battery on late model vehicles, you may need to enter an alarm system code to regain full functionality. If you don't already have that code, go to a dealership and give them the VIN number.

@MrSuzukiyamaha 2 жыл бұрын

I cant believe you left that door open and interior unprotected while you did all the grinding and welding

@kriticalbuilds3232 4 жыл бұрын

Thanks for video

@1AAuto 4 жыл бұрын

Kritical Builds Thanks for watching!

@rotfan77 Жыл бұрын

Great job. I need to do this on one of my cars, but I never thought I could actually do it,

@mijodo2008 2 жыл бұрын

Ray Burn on your arms may lead to skin cancer 20 years later. great video. thank you for posting. Cheers from Michael. Australia.

@samg5543 2 жыл бұрын

The cardboard absorbs some of the chemicals from the mix and could cause problems with curing. It also can contain waxes for waterproofing that will contaminate your filler and cause poor adhesion. They say not to use cardboard for a reason.