How to Install 2nd and 3rd Row Explorer Seats in a 2013-2019 Police Interceptor Utility

No video

How to Install 2nd and 3rd Row Explorer Seats in a 2013-2019 Police Interceptor Utility

Рет қаралды 4,122

Күн бұрын

How to remove the OEM police seats and replace them with seats from a Ford Explorer.
If my content has helped you with your project and you would like to say thanks, you can donate on Patreon. If you would like to contact me directly with questions regarding your project you can message me directly on Patreon as well.
patreon.com/de...
Parts List:
Police Interceptor Parts:
3dub200.com/co...
2nd Row Striker Brackets:
Left Outer: BB5Z78600A16C
Left Inner: BB5Z78600A16D
Right Inner: BB5Z78600A16B
Right Outer: BB5Z78600A16A
3rd Row Striker Brackets:
Left Seat Striker: 8A8Z7462441A
Right Seat Striker: 8A8Z7462440A
Pivot Brackets:
9F9Z7460592B
0:00 Removing the Police Bench
5:19 Managing the Police Wiring Harness
7:21 Relocating the Power Point
10:37 Installing 2nd Row Seat Hardware
12:24 Installing the 3rd Row Seat Hardware
14:39 Preparing the 3rd Row Area
16:21 Installing 2nd Row Seat Belts
20:29 Installing 3rd Row Seat Belts
25:47 Installing 3rd Row Seats and Quarter Panel
31:55 How to Disconnect Inflatable Seatbelt Buckles
35:23 Installing 2nd Row Seats

Пікірлер: 24

@pietown044 3 ай бұрын

@De-Policeify here are all of the seat bolt part numbers; Stud - M10 X 23 M10 X 20, Screw - M10 X 20mm, Nut Adjusting Screw (for stud) N802068S424, All motor craft parts. Carry on my people.

@MRRICARDOCARRILLO 2 ай бұрын

What’s the bolt size I need for the seat belt retractor to the wall ?

@xfefen2883 6 ай бұрын

Please do a video on wiring up heated/cooled seats ❤ thanks for the videos

@adamcharafi8109 9 күн бұрын

Can you please do mine too ? What’s state are you? Very interesting video!!

@irfanmuhammad5293 6 ай бұрын

Great informative video. Keep it up.

@Digimee2 4 ай бұрын

Do you have a vid on resetting the airbag light after replacing the seats ?

@frankyisfranky 5 ай бұрын

Do you not have a trim cover piece for where the seatbelts are bolted in on the bottom? For the 3rd row

@MatthewLevine-eh7zl 4 ай бұрын

I'm thinking of removing my 3rd row from 2013 explorer XLT. if anyone watching needs the seats to install, lmk?

@THE.MASTER.RESELLER 2 ай бұрын

I appreciate this video because I just bought a 2016 PI. A few questions. Does the support bar have to be removed to install 2nd row seating? Are all seats from the same year compatible and can be installed into a PI? Are there specific 2nd and 3rd row seating that fit into PIs? Thanks for the help.

@depolicify 2 ай бұрын

The only thing that needs to be removed for 2nd row seating is the big steel brackets that cover area under where the 2nd row goes. The "X" support bar in the back can stay unless you also want to install 3rd row seats. All seats from 2011-19 Explorers are compatible as well as seats from a Ford Flex and I think similar year Lincoln MKT

@THE.MASTER.RESELLER 2 ай бұрын

@@depolicify thanks!!

@albertovazquez5816 3 ай бұрын

Have you done a video on adding 3rd row seats that are electric? I found a great deal on a whole set but my only concern is the 3rd row being electric, could it be an easy swap? Do you have any experience with that? If so what all should I grab?

@depolicify 3 ай бұрын

I haven't done it but it should be a simple swap, you would want to also get the control panel and as much wiring as you can get with it. The electrical workshop manual has all the diagrams.

@albertovazquez5816 3 ай бұрын

@@depolicify you’re the man, thank you! I’ll probably be back haha.

@YoungMacy 6 ай бұрын

I wonder if a 2020+ would work theres a conpany that sells them for dirt cheap around my house but im scared they wont fit

@coletrickle113 6 ай бұрын

They won't.

@MrCharlievan 2 ай бұрын

Was that a shot gun shell?? LOL

@scottkashuba3476 6 ай бұрын

What year were the replacement seats? I know the later year front seat wiring doesn't match the same years of the PIU.

@depolicify 6 ай бұрын

These were from a 2013 sport into a 2017 PIU. Wiring matched up just fine.

@BCeptor 6 ай бұрын

Gotta ask. What bolt size are the seat bolts for the floor? I don’t believe my utility has the seats or bolts and I may have to source the bolts myself.

@depolicify 6 ай бұрын

I am not sure on the thread sizes of the factory bolts. Your best bet may be running to a salvage yard to find all the hardware.

@pietown044 3 ай бұрын

here are all of the bolt part numbers; Stud - M10 X 23 M10 X 20, Screw - M10 X 20mm, Nut Adjusting Screw (for stud) N802068S424, All motor craft parts.

@tyg6768 6 ай бұрын

Do you have any tips to remove the headliner?

@depolicify 6 ай бұрын

At the factory they install them through the front before the glass is installed. Your only good option now is through the back. Remove all of the pillar trim (4 per side), use torx to remove the sun visors and side brackets, unplug the harness in the Left A pillar and the two connection points for the rear washer hose in the right side. Get help to pull it from the back and someone inside helping maneuver. You will have to lightly bend the edges. If you’re careful it won’t crease. There are some round magnets that help hold it up.