Lol 😂😂 I think it would be a great idea to mount the drill in a lockable housing structure, which will then be welded to the bike.

……how about bringing an extra battery along?

😂😂😂

@@Moon-magic109 did you read the original comment? He said they nicked the drill, not the battery 🤡🫵🏽

Wouldn't it be possible and better to modify a battery charger and use a speed/volt controller. Once bike is parked, unhook the battery 🔋?

Speaking of grip strength, how about 2:17? 🤣

Nothing like a good grip strength if you know what i mean 🤣

ah yes, perfect for all day, and alll night… wait

Carry a couple extra batteries.

@@bolivariano75 Still doesn't answer my question tough does it.

Estimating - Probably a 20v drill and assuming a 4 amp hour battery I estimate 7 to 7.5 miles. Top speed is 25-28 mph for a couple of minutes if gearing is right. Cruising speed probably 15-20 For Distance - I'll assume 4 amp hour battery. Most 20v drills make about 500 watts (hard to find info), so they are pulling 25 amps. At full speed putting all that power into the bike it could last maybe 9 minutes. He looks like he is going 15 mph. 2.25 miles. In reality though, its probably only using half the power, and half the time one is coasting, so 2.25 * 4 = 9 miles. Take 25% away to account for efficiency. So Probably 7 miles. I used a bike distance calculator online and it said 8.6 miles with a 24v system. Drill is probably less efficient so probably 7.5 mile or so this way. For Speed - I used a bike watts calculator to maintain a certain speed at 400 watts one can sustain 25-28 mph. If the drill has 500 watt max capability its only so efficient so I'm just estimating 20% loss or so. I think that would only be possible for a minute or so before battery drain lowers the output.

​@@BigFishEnergy i would like to take a 24v v4 brushed motor from an Milwaukee impact, with those 5 ah batteries

my 20v batteries only run about 10 mins straight, so maybe a mile or so if you are lucky. also remember, this thing is straight geared, you can't coast and when your battery is out you're pretty much done unless you wanna pedal against the motor.

Can someone ask him in his language?

Yeah that thing would start smoking after like 15 mins of just full send lol

For what?

what is a council pickup

​@@snorttroll4379my guess is "the local dump". free bikes.

grasias se bienen muchos videos

@@filipotv los estaré esperando éxitos mi pana

@@filipotv q autonomia tiene la bateria y asta cuantos kilos agusnta

Da para desmontar a parafusadeira e tirar os pinos que travam, ai daria pra pedalar Mais a melhor solução seria colocar uma roda live na parafusadeira

Its pretty deceant. Its enough to make it to your moms house and back

Even if it’s not good. He could have multiple spares. Brilliant

3/4 mile - 1.5 is my personal guestamet, I don't think that it would make 2 miles. Cool & ingenious idea, just not very practical. Nice to know that these things are possible though. Cool video 😎😎😎😎😎👍

That would still be one dope ass e bike😂😂😂💯👌

You are great (:

Kph obviously.

Taki mały szczegół 😂😂

Valla porquería

I guess 5-10 minutes max

across the street and after changing the battery on the next street the tiny motor goes up in smoke..

@@samsunggalaxytaba3858 its a reducer motor but the battery would explode first

@@mr.engineear0987 i've never heard of a "reducer" motor used in a handdrill.. it's likely a brushed or brushless motor used in one of those.. and i have had one catch smoke while using it during drilling.

You can find oversized Peg's at just about any Bingo Hall

😳😆

А двигатель что не будет греться? Как для покатушак идея не плохая но я думаю Шурик под постаянной нагрузкой долго не прослужит

@@dmitriymatskov9186 да там если по нашим дорогам да бандюрам то он отлетит и батареи не посадит.лол.

The battery will last longer than the motor so don't worry. The motor on the drill will burn out on the first day.