How to Install a Lawn Sprinkler Pump

Рет қаралды 623,805

10 жыл бұрын

Waterboy Pump Training www.waterboysprinkler.com
Richard Levine of Waterboy Sprinklers presents a Step by Step instuctional video on,
How To Install a Lawn Sprinkler Pump and disconect the old pump,.MAKE SURE YOU SHUT THE POWER OFF TO OLD PUMP FIRST
This video will educate those who would like to install there own pump.
Any questions can be directed to Richard at 954-581-6455

Пікірлер: 68

@Apoind1 8 жыл бұрын

4 years later...and it is still a valuable video. Thanks!

@richardlevine5983 8 жыл бұрын

your welcome

@skylark2077 6 жыл бұрын

Thanks for posting this video it helped me to do own sprinkler pump

@billalexander8011 5 жыл бұрын

Excellent video. My well is a little different as it is Artesian. I have a flow valve on the discharge. I have the same Gould pump/motor assembly that you do. The video definitely gave me some ideas on how best to install. Thanks for making the video.

@koakkingofgame5136 Жыл бұрын

@normansmith3544 10 жыл бұрын

Excellent video.Also thanks for the follow up phone call.

@frankfernandez3391 2 жыл бұрын

Very cool. Thank you for this instruction video.

@AERIALBOY1 9 жыл бұрын

thanks I am going to try to replace my pump today.

@agathaandvictorroa2190 7 жыл бұрын

This is also a great learning video to understand the mechanics of plumbing a pump...

@Rdebeauvoir1 4 жыл бұрын

thank you for a great video!

@kidsarcaderoom7316 6 жыл бұрын

You met a awesome video keep up the good work

@georgewright5484 Жыл бұрын

I really appreciate the video you made it helped me tremendously

@waterboysprinkler Жыл бұрын

Thanks for watching I'm glad it was helpful any other questions let me know

@daanisrael9683 2 жыл бұрын

Thanks for the information you made look so easy

@waterboysprinkler 2 жыл бұрын

Glad it was helpful!

@reddyuda 7 жыл бұрын

I just installed the same pump - much nicer than the flotec I was replacing. Only problem I am having is the discharge fitting is leaking where the plastic threads into the cast iron housing. Any tips, or just use more teflon tape?

@thelovefamilymilitarypod Жыл бұрын

Great job

@shaggyfromfl 6 жыл бұрын

Hello, do you know where I can buy a hand priming pump as you used in your video, thank you

@Jtega213 6 жыл бұрын

"And thats how ya pum..thats how ya plumb a pump" "its a guzzla" lol videos great

@markrogge3098 5 жыл бұрын

What the purpose of the nipple pipe on the intake side vs the male adapter on the top??? Less glue joints??

@panseycain7086 4 жыл бұрын

Hi, did you turn the knob back once the pump was filled? When do you turn the switch back to automatic?

@Frenojan007rr Жыл бұрын

I had mine with lake water and now I Installed mine with the house water!! Do you think is a good idea??

@TheRykpaalt 8 жыл бұрын

Ours is 16 years old and suddenly stopped rotating zones - ours looks like the configuration that you have here. We have 2 active zones- front and back yard and the other 2 are capped off. I have looked in the system and see no corrosion.

@SARJENT. 3 жыл бұрын

Nice vid. Couldn't a couple of unions have been used to make pump replacement more simple for the next person in the future? For instance one wouldn't need to cut any pipe to R and R a pump.

@waterboysprinkler 3 жыл бұрын

No I don't believe in pvc unions they leak it's much better just cut it out replace it with a coupling And besides it's always better to re pipe when you replace a pump. And that's based on 47 years of experience and thousands and thousands of pumps that I replaced.

@luisjimenez4002 7 жыл бұрын

where i can find those black hose , the ones connect to the hand pump ... and what size are ? thank you

@nflsports3936 6 жыл бұрын

Does it matter which black or white wire goes to the 110

@patcracker6383 2 жыл бұрын

I have a similar set up but how would I connect a pump start relay and control timer to the system? Thanks

@pozmarciv Жыл бұрын

I have been losing prime .. my water source is from my canal .. I changed the check valve at the canal.. then filled my system with water from my hose that I connected to my system.. I got it running but when my system shuts down it loses prime.. any thoughts on what it could be ? Maybe the check valve at the pump is stuck? Thank you and thanks for the videos

@elcomandante9299 2 ай бұрын

Shut the valve off fitst then turn off pump. Upon restart turn pump on first thrn your valve.

@breezyresortsiaton4401 3 жыл бұрын

Installing unions would make changing it out a bit easier.

@jrm163 Жыл бұрын

They CREATE bigger projects for themselves. In this case, next time they’ll need to re-pipe several pipes as there’ll be no pipe left for him to cut!

@specialestness 10 ай бұрын

@@jrm163don’t let him see this comment. He’s “installed 37,000 pumps” so you should “stick to your day job” My pump needs to be winterized every year and part of that includes letting the check valve drain all prime so I would need to re-plumb every year if it weren’t for unions.

@waynesonex 3 жыл бұрын

I have solenoid valves that control the system. Should the pump be before or after the valves? Probably a stupid question. Thanks.

@waterboysprinkler 3 жыл бұрын

Before

@waynesonex 3 жыл бұрын

@@waterboysprinkler thanks

@250slidin3 3 жыл бұрын

How many well points do you have?

@danielalvarez1746 Жыл бұрын

what's the name of the thing you wear at the end of the video?

@charliemcgriff7643 8 ай бұрын

Hey friend where can i buy that primer pump?

@davefromjax 10 жыл бұрын

Should I install a check valve if one is not already in place?

@richardlevine5983 10 жыл бұрын

yes

@davefromjax 10 жыл бұрын

Richard Levine there is already a foot/check valve. Do I need another on the surface? Thanks

@waterboysprinkler 10 жыл бұрын

davefromjax no 1 will work

@josephwilliams1500 19 күн бұрын

You sure that's 1 1/2 pipe?

@beachside1 5 жыл бұрын

Great job replacing that pump. Im having a problem with mine except a little different. The wiring that underground for the pump is in pvc but it keeps getting hot and tripping the breaker. What type of wiring should I use underground? Should it be in pvc or would that create a heat problem? HELP!!!!!!!!!!!!!!!!!!!!!!!

@waterboysprinkler 5 жыл бұрын

Yes you definitely want to run your wires in PVC conduit they must be at least a number 12 gauge and it cannot be too long of a distance either you need a 20 amp breaker to run that pump on 220vac

@beachside1 5 жыл бұрын

@@waterboysprinkler Wow quick reply thank you. The run is about 110ft its an older fla house so it goes from the pump to the breaker inside but like i said I used that white romex i thinks its called. Its usually seen inside new house construction in the walls for like outlets. Im just not sure if using that type of wire is the right dtuff or not causing the breaker to blow. The breakers are 2--110v making it 220v i guess. Could it be wired incorrectly when the pump company replaced the pump? Btw Im sorry for bothering you. Its just that you know what your doing and I trust what you have to say...Thanks alot

@irvhahaa13 5 жыл бұрын

@@beachside1 some pumps you can run on 110 you just have to manually switch it inside the back of the pump is, you can check yours and see

@jimrojas62 4 жыл бұрын

I just helped a neighbor install a 1.5HP self priming pump to draw his lake water for his sprinklers. The pump is located on the side of the house next to the sprinkler valves. We ran 150 feet of 1.5 inch pipe down to the lake and installed a check valve next to the well screen in the lake. The pump will not draw at all from the lake. I checked for clogs, air leaks, and even changed out the check valve. I primed the system and it still will not draw from the lake. What am I missing here?

@davidluxton-smith7738 2 жыл бұрын

Pumps don't like to 'suck' from a distance. They will push water much better, so pump near the source.

@waterboysprinkler 2 жыл бұрын

Experience stick to your regular job and hire a company that knows what to do

@waterboysprinkler 2 жыл бұрын

@@davidluxton-smith7738 another person that doesn't know what they're talkin about I ran 1000 ft suction line on a job plenty of water it's just called experience that's all

@waterboysprinkler 2 жыл бұрын

So now you know what pumps like what are they people

@waterboysprinkler 2 жыл бұрын

You can install a pump a mile away if you know what you're doing

@ronaldkretz358 8 жыл бұрын

This video has been approved by Supreme Irrigation Inc.

@kumarpalshah6010 6 жыл бұрын

Ronald Kre

@joycechepet4583 3 жыл бұрын

Nataka wetar pump

@itsmcgotime3280 6 жыл бұрын

where can i buy the hand pump?

@patrickkubovsky5560 4 жыл бұрын

John McGill have you ever gotten an answer to you question about hand pump

@rhinorampage1807 2 жыл бұрын

Is there no pressure tank on this system? do you find it works well without a pressure tank?

@waterboysprinkler 2 жыл бұрын

yes

@elcomandante9299 2 ай бұрын

So called experts claim u need a pressure switch. I dont have one. That u need a pressure tank. I dont have one. So yes it works great.

@flpaintman71 3 жыл бұрын

Shut the power off from the Breaker or Disconnect first!

@waterboysprinkler 3 жыл бұрын

I already said that in my description to make sure the power is off and use a tester to confirm that power is off.

@dougyshl 4 жыл бұрын

First thing you should do is cut power to it but ok

@waterboysprinkler 2 жыл бұрын

What do you think were stupid lets just work on the pump with the power on and get electrocuted We use something called a Meter an electrical tester Don't attempt the job if you don't have an electrical tester

@waterboysprinkler 2 жыл бұрын

If you would have read my description you will see that I mentioned shut the power that's what I said in my description if you looked at that