Today on we will be installing a set of Bilstein Coilovers on the BMW 328i. This installation was initially overwhelming and it was very time consuming, but with patience anyone can do this job at home!
Пікірлер: 54
@Max_G432 жыл бұрын
Can't believe you guys did this in nine minutes that must be a world record
@rsevn Жыл бұрын
Great video!
@JohnEngel Жыл бұрын
Thank you so much.
@ephraimmurumbi27544 жыл бұрын
Hey thanks for the video though its was run through quick. What shock s are actually installing. More details of tools and links to the tools and shop would very much help. Thank again.
@JohnEngel4 жыл бұрын
Ephraim Murumbi here is everything you need from the experts at ECS. www.ecstuning.com/b-bilstein-parts/pss10-coilover-system-adjustable-damping/48-131636~bil/Video319-HD/
@jpwilliams52643 жыл бұрын
Did the Bilstein not come with a strut bearing? It looked like there was one on there already and you still removed the one from the stock set up. Or was I seeing a completed Bilstein and an OE one side by side?
@JohnEngel3 жыл бұрын
Jesse B they were both complete and side by side. Thank you so much.
@3timezacharm5053 жыл бұрын
Hey. Can you please make a one year review of the bilesteins
@JohnEngel3 жыл бұрын
Unfortunately this was a friends car. He has since moved to Florida but I was able to talk with him and he mentioned that he is still happy with them but they are very stiff.
@3timezacharm5053 жыл бұрын
@@JohnEngel Thanks
@JimHardee3 жыл бұрын
Did you guys have to trim the bumpstops at all? I just installed these on my e90 335i and even with them raised up all the way I feel like the car is really low and is bottoming out on the bump stops occasionally.
@JohnEngel3 жыл бұрын
We did not have to trim it at all.
@bogdansilyuk96842 ай бұрын
The bump stops in the front strut not go on the bilstein, they have an internal bump stop.
@gabrielpuebla5930 Жыл бұрын
You're a lifesaver
@andrzejosuch610 Жыл бұрын
How did you set the ride height? What measurements in the front and the rear did you use?
@JohnEngel Жыл бұрын
We just measure the originals and dropped it by the amount he wanted. Then let it sit and adjust as needed.
@christhantos6155 ай бұрын
do you have the instruction manual for these specific bilsteins? i got the same set and im wondering what oem pieces must be transferred over
@JohnEngel5 ай бұрын
I do not. This was a friends car that we worked on.
@ernestovillasenor7065 ай бұрын
Just to let you know you don’t have to remove the brakes calipers
@JohnEngel5 ай бұрын
Thank you. :)
@BimmerMafia Жыл бұрын
Did you swap over any washers from oem setup. I’m stuck right here cause seems like it needs the washers.
@JohnEngel Жыл бұрын
Which washers are you talking about? Mostly we used all of the items from the kit. The only thing we found was that the rubber in the spring mount had to be removed.
@BimmerMafia Жыл бұрын
@@JohnEngel there’s 2 washers on oem strut. A big one that’s flat 1 side and curved on other . And a smaller one. I put 1 washer ( smaller 1) over the bumpstop. Then the spring cup /perch , then the flat/black line washer then the top hat and nut … Something didn’t seem without washers. Also I didn’t have to compress the bilstein strut to put top hat on. It all sort just fell together.
@JohnEngel Жыл бұрын
@@BimmerMafia that sounds right. I’d have to go back and remember the exact order but that sounds like the right way.
@BimmerMafia Жыл бұрын
@@JohnEngel right on. Preciate ya ✌️
@joeypassalacqua17653 жыл бұрын
So I got maxpeedingrods height adj Coilovers for my bmw E90 the rubber bushing doesn’t fit the spring in the rear
@JohnEngel3 жыл бұрын
Did they send a bushing with the kit?
@lilsmokey13222 жыл бұрын
Same and I don’t know how to do the rear
@simong.5535 Жыл бұрын
First mistake was buying maxpeeding rods, sorry my friend
@drewc7214 жыл бұрын
Where can I get one of those “strut spreader tools” sockets?!?
@JohnEngel4 жыл бұрын
I think he got it on amazon.
@dflex41803 жыл бұрын
Dont need it lol a flat head screw driver does the job
@kc22132 жыл бұрын
Did the car originally have sport suspension?
@JohnEngel2 жыл бұрын
That’s a great question. As far as I know it did but the suspension was gone from years of use.
@marcohuerta1224 жыл бұрын
Why is the front coilovers yellow? I think because this are not inverted.
@Ben-xp9ft4 жыл бұрын
because that’s the colour the Bilstein decided to use? weird question
@sr20dett10002 жыл бұрын
@@Ben-xp9ft Bilstein redesign the front strut. It use to be inverted and silver, looked like stainless steel but it wasn't.
@n54e822 жыл бұрын
Updated version is yellow mine are
@sr20dett10002 жыл бұрын
@@n54e82 is it still a monotube and rebuildable?
@jeremywhittler85913 жыл бұрын
Voghtland and 20's. Underway ....
@jeremywhittler85913 жыл бұрын
Why do we keep treating our 335i n54's Like the Vw community.... 20's fit , don't rub ....run nitto I have konigs . 19's are too small , and twins are antiquated so bottom mount a garett single twin scroll or bw efr iron mani. If the new supra has a bmw engine then treat that 335 like a supra and stop living I'n the dark ages.
@n54e822 жыл бұрын
What does any of this mean lol
@meurme22 жыл бұрын
Does it fit e92 328xi coupe?
@JohnEngel2 жыл бұрын
That’s a great question. I think they will but not sure.
@yahtadi51523 жыл бұрын
N52 or N53?
@JohnEngel3 жыл бұрын
N52.
@dr.boosts Жыл бұрын
Is it a fucking secret to get the torque specs???? Like Jesus the file online is corrupted and nobody will actually put a strut back together. They just show it installed. No help at all.
@JohnEngel Жыл бұрын
Such a great point. I understand your pain.
@masonlowdermilk77053 жыл бұрын
Didn’t even show the ride height after, smh 🤦♂️
@JohnEngel3 жыл бұрын
I agree.
@monocuco8183 жыл бұрын
Next time give an impression of the ride quality and any improvements :) But good video. Go for a test drive!
@JohnEngel3 жыл бұрын
Absolutely. Thank you.
@bogdansilyuk96842 ай бұрын
You guys are taking a bit too much off 😮, u can take out the front without taking the caliper off