How to install Driven Halo Clip-Ons on a 15-17 Yamaha YZF-R1 from SportbikeTrackGear.com

Рет қаралды 128,364

9 жыл бұрын

Watch as Brian shows you how to install a set of Clip-Ons from Driven on the 2015 Yamaha YZF-R1. If you feel uncomfortable with this modification please take your bike to a licensed motorcycle mechanic. Stay tuned for more instillation videos!
www.sportbiketrackgear.com/dr...
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions post us a comment or send an email to orders@SportbikeTrackGear.com

Пікірлер: 115

@rickg.8231 2 жыл бұрын

Brain and STG make these videos so great. Brain seems to know how to speak to us diy-ers. Keep up the good informative videos.

@sportbiketrackgear 2 жыл бұрын

Thank you for watching and for the kind words. - Van

@Antti88 Жыл бұрын

These videos are excelent👌 Even amateur can learn about these videos and do it by self👍 it's good that you show how to do step by step😎 thanks Brian👏

@sportbiketrackgear Жыл бұрын

Thank you for watching, happy to hear these have been helpful. - Van

@MrKha703 8 жыл бұрын

i finally found a full video with instructions on how too, from start to finish for my clip-on handlebares after watching so many other stupid 5 minutes clips from other youtube users on there how too instructions really just doesn't explain much. You sir are legitimately worthy so for that am now a new subscriber to your awesomeness channels!

@sportbiketrackgear 8 жыл бұрын

Thanks! We appreciate you watching and the sub!

@Caiman_dorohedoro 7 жыл бұрын

I don't own a bike and I do dream of getting myself one sadly I'm with no job so all I can do is dream and watch these practical Bike related videos :D

@DIYBFF123 6 жыл бұрын

VERY nice videos! just bought a crashed -15 R1..needs a LOT of love, among other things a new RH clip-on, now I know how to do it! THANKS! :)

@sportbiketrackgear 6 жыл бұрын

Happy to help and we are here to help you get that bike back together for sure. - Van

@awesomeagnihotrisvlog 7 жыл бұрын

is there any aftermarket handlebar which can look sporty and yet provide some comfort?? I ride a 600rr 2008..

@heikogehrig 8 жыл бұрын

Great vid, thanks for taking the time!

@ogrush7219 4 жыл бұрын

thank you for making such a comprehensive video.

@sportbiketrackgear 4 жыл бұрын

No worries and thanks for watching! - Van

@mynamesjeff4853 2 жыл бұрын

That air compressor trick just saved me a headache

@sportbiketrackgear 2 жыл бұрын

Happy to help and thanks for watching! - Van

@dixoncider7256 5 жыл бұрын

never a bad video from you guys. nice work.

@sportbiketrackgear 5 жыл бұрын

Thank you for watching, appreciate that for sure! - Van

@annemonsma9904 5 жыл бұрын

Great video! Fully detailed!

@paytonpayton7489 6 жыл бұрын

Great Videos. thank you for your time and effort. I really appreciate it!

@sportbiketrackgear 6 жыл бұрын

You are welcome and thank you for watching! - Brian Van

@johnnysxoulio1223 8 жыл бұрын

very nice video and thank you you realy help me to instail easy my clip ons on my cbr 400

@sportbiketrackgear 8 жыл бұрын

+SARXAD Great to hear! Thank you for watching!

@Syncere20 8 жыл бұрын

Excellent Video The mechanic is very knowledgeable

@sportbiketrackgear 8 жыл бұрын

+Steven Rockafellow Thanks! I have spent a lot of time turning wrenches!

@timothy9596 5 жыл бұрын

Thanks for the great instructional video.

@sportbiketrackgear 5 жыл бұрын

You are welcome and thank you for watching! - Brian Van

@steffydog 7 жыл бұрын

Great job

@adamcameron9029 Жыл бұрын

Unreal Brian thank you

@sportbiketrackgear Жыл бұрын

You are welcome and thank you for watching! - Van

@ronaldmiranda745 9 жыл бұрын

Love your vids! Any plans on doing this to your YZF-R3 project bike?

@lb5522 7 жыл бұрын

Great vid bro, question for you. can you remove those rounded bar ends and put different ones ???

@fifthflobasement8046 7 жыл бұрын

Have gotten the switch pods yet

@laukiknerkar6804 6 жыл бұрын

Sir these clip ons will be prefect for suzuki gixxer sf

@vik9558 8 жыл бұрын

Hi STG, can you tell me what is the size clip ons you used on this video? They come in at 50mm, 53mm etc. I think the size in video will suit me perfect. Thanks

@jmay2286 7 жыл бұрын

What would you recommend to do if your nipple from the controls is broke off from a wreck? I purchased woodcraft clipons and the control on my right side twisted and broke off so now the throttle tube moves even when installed fully. Thanks in advance Brian!

@aytibilgin6546 7 жыл бұрын

+Sportbike Track Gear Hi I want to use my OEM bar ends. I didn't see any bar ends on your bike. Can I use my OEM bar ends or any aftermarket bar ends. Also why didn't you install the bar ends ?

@creativersd 9 жыл бұрын

hi, I own a a ninja 300 abs model. i cant decide between this and the driven riser clip ons. whats the difference between the two? is it the angle adjustments? is the Halo clip ons easier to install?

@hmongler8994 4 жыл бұрын

Brian, since the new clipon can be adjusted around the forks where we wanted, not like the old clipon with a set screw to secured on the top. If we wanted to lower the front end of the bike and drop the forks protruding upwards, is there an issue with mounting the clip on top of the triple tree clamp plate so to have a cleaner look without the forks sticking up. Since the new clipon is adjustable I don't think there shouldn't be an issue. I have done it with my cruiser with just a clipon and have no issue with clipon moving around. Let me know thanks.

@vijaykalla 7 жыл бұрын

Hi can we use these clip-ons any bike? I have a naked bike with one piece handle bar but I want a clip-on and my bike has a USD forks. If yes, can you tell me list of things need to be considered when replacing it with stock handlebar?

@pboothus 6 жыл бұрын

Great step by step video. I would like to move my clip ons approximately up an 1" and towards the rider 1". Is there such a product that works on the 18 R1 for this purpose? Would risers w/those dimensions cause any other problems w/cables lengths anywhere? BTW, thanks for the vid. Last, what size clips on do I need for my bike? Fork diameter, etc? Looking for similar length, just repositioned

@sportbiketrackgear 6 жыл бұрын

For the R1 you need 50mm clip ons. As for the risers on that bike there are several factors to consider. What I recommend doing is to remove the top triple clamp and loosen the OEM clip ons up. From here try to slide them up on the fork tubes to see if you have enough cable length to make the move you want. You could also slip the clip ons off the forks, slide the top clamp back on and hold the OEM clip ons on top of the clamp to see what clearance is available. Lots of variables in the riser clip on fitment. You should be able to install a riser clip on with a 1" rise, the issue will be getting the bars closer to the rider as most riser clip ons will move the bars forward just a touch (depends on the bike). - Brian Van

@milanrokaya5765 7 жыл бұрын

What do you recommend for 2004 cbr600rr??

@chaoticend27 2 жыл бұрын

For anyone wondering what size drill bit to use to match the OEM hole 🕳 you need a 13/64” (5,2mm)

@sportbiketrackgear 2 жыл бұрын

Thanks for sharing. - Van

@LeeTillbury Жыл бұрын

Doubt Yamaha use any 5.2 drill bits

@chaoticend27 Жыл бұрын

@@LeeTillbury trust me. I didn’t think so either. But That one drill bit size fits perfect with the OEM housing. I personally installed these mounts on myself. I ensured to start small on the bits and worked my way up. The perfect size is that one I mentioned above for 15-22 R1

@yuealex3284 11 ай бұрын

Thank you Brian for all these videos! I have a 15 R1 and I'm currently looking for an aftermarket clip on that has the same/similar offset as an OEM clip on, so what offset should I choose? zero, 20mm?

@sportbiketrackgear 11 ай бұрын

Thank you for watching and happy to hear the videos have been helpful. For your bike there are a ton of options (link is below). On that page we have several different offsets to choose from, compare them and run with the ones that make the most sense to you and are closest to the factory offset if that is what you prefer. www.sportbiketrackgear.com/parts/yamaha/yzf-r1/2015/?_bc_fsnf=1&Department=Handlebars+and+Grips

@chaoticend27 2 жыл бұрын

Here again Vance! Question for these. I have a 2021 R1. How does one go about choosing the right MM size of handlebars?

@sportbiketrackgear 2 жыл бұрын

You need the 50mm clip ons for your R1. - Van

@ninja63639 2 жыл бұрын

Is the bottom triple enough to support the forks with the bike sitting on the front tire? I need to pull my top triple off to repaint it on my '03 zx6. Brake fluid and a steering damper bracket are to thank.

@sportbiketrackgear 2 жыл бұрын

Yes you can let it sit like that for a bit. - Van

@kenhiguchi2144 7 жыл бұрын

When drilling metal it is in your best interest to get some oil on it. It will make drilling easier and faster, as well as making your bits last longer

@sportbiketrackgear 7 жыл бұрын

I hear you and have done it both ways. At the expense of the bit I have found using a Cobalt tip bit with no oil and easy pressure gets the fastest results. It is at the expense of the bit on some level. - Van

@kenhiguchi2144 7 жыл бұрын

Ok JUst making sure everybody is in the know.

@sportbiketrackgear 7 жыл бұрын

No worries man

@bradencampbell2874 6 жыл бұрын

I've got a 2015 r1 and need to take the stock ones off in order to install a new clutch perch so i might as well throw these on mainly for looks. also need to add some extra length on the brake side, are these the 50mm size?

@sportbiketrackgear 6 жыл бұрын

Yes sir they are 50mm. They look nice for sure but remember the ability to replace just the bar if you have a tip over is a real benefit as well. - Brian Van

@Jacklolow 2 жыл бұрын

Got those for my r6, fits perfect, very comfortable but they're very light and that causes really bad vibrations on the grips, one of the clipon bolts fell out in the middle of the ride because of the vibrations, is there a way to reduce it? will weighted bar ends help?

@sportbiketrackgear 2 жыл бұрын

The weighted bar end should help to reduce the vibration a bit. If the fastener came out that means it was not tight enough to begin with. After you install these or any clip ons you need to double check the torque of all the fasteners after the first ride. -Van

@_stanley_c_ 2 жыл бұрын

Hey Brian. I own a CBR650R and thinking of installing clip ons as well. Do we need a front stand or anything to fix the front wheel position? Thanks.

@sportbiketrackgear 2 жыл бұрын

No you would not need a front stand to install the clip ons. You can remove and reinstall the top triple clamp with out lifting the front. - Van

@lukaszM46 8 жыл бұрын

Hi Brian Whats the main reason that you would want to change the stock clip-ons to something different?

@sportbiketrackgear 8 жыл бұрын

+dudekidPL You are able to adjust the ergonomics much more and in the event of a tip over at the track you can replace a bent bar rather than the whole clip on. - Van

@topgsolarcleaning 5 жыл бұрын

Whats up Brian, so I just purchased heli-bars for my 2007 R1. Is the process similar to the video above?

@sportbiketrackgear 5 жыл бұрын

He Elijio, I would expect there to be a ton of overlap with a few differences. Overall the install process should be very similar. - Van

@topgsolarcleaning 5 жыл бұрын

@@sportbiketrackgear thanks guys. I enjoy watching your videos. Very informative and no b.s.

@RTK171 4 жыл бұрын

Do the driven clip ons fit on the 2017 R6 or even the 1m5 inch rises halos.. I'm looking at helibars but getting info from them is nigh impossible

@sportbiketrackgear 4 жыл бұрын

The std Halo Clip Ons will for sure fit. If you want to go with a set of risers there will be a little give and take to get them installed. I would try to stick with 1" or 1.5" at the most. - Van

@ghm720 4 жыл бұрын

Hi Patricia. Have you been able to install them? What extent? Thx!

@farschadabolfathi 6 жыл бұрын

At the length you left them at the end ... are they wider then stock would of been ? How much wider , at least an inch bar end to bar end ?

@sportbiketrackgear 6 жыл бұрын

I typically set my bike up with extra length on the bars because it fits me better. Also you get a little better leverage with the longer bar length. - Van

@farschadabolfathi 6 жыл бұрын

Sportbike Track Gear yes Van , but remember seeing comparing the bars next to the stock ones and didn’t seem much longer and also you had to bring them back in becaz the switch housing on right bar was hitting fairing .. so I’m wondering if at that final set length they are any longer then stock

@squatsnow 8 жыл бұрын

sorry just a bit off topic here. does anyone know how to adjust the throttle grip free play on the 2015 R1. Thanks, just trying to avoid having to go to the dealership to get this done. I attempted however to no avail. Thanks

@sportbiketrackgear 8 жыл бұрын

+squatsnow It is adjusted by the throttle cable adjusters coming from the throttle tube. If you have used those and were not successful you may want to take it to a dealer. They likely won't charge much, if anything and it only takes a couple of minutes. Thanks for watching!

@xSublemon 2 жыл бұрын

btw a lot of these screws are "JIS" not Philips, a good set of JIS screwdrivers of different lengths is pretty handy on these japanese bikes, since they don't strip the screws

@sportbiketrackgear 2 жыл бұрын

Thanks for watching! - Van

@slavenleko Жыл бұрын

Tell me please, I bought clips on for my motorcycle and now I'm worried, because there is nowhere provided for the weights on the handles, only plastic covers. I see that you have the same thing, does it have to be like that?

@sportbiketrackgear Жыл бұрын

You can install some weighted aftermarket bar ends from Woodcraft or Driven Racing if you feel you need them. Below are links to both: Woodcraft Bar End Weighted Slider Assembly Set www.sportbiketrackgear.com/woodcraft-bar-end-weighted-slider-assembly-set/ Driven SS Bar End Weights www.sportbiketrackgear.com/driven-ss-bar-end-weights/ - Van

@anibalalvarado763 8 жыл бұрын

Why my complete throttle moves side to side? And all the holds are tied and when I try to give gas the complete throttle goes all the way down

@sportbiketrackgear 8 жыл бұрын

+Anibal Alvarado There is usually plastic studd built into the assemble the studd goes into a pre-drilled hole that keeps it from spinning around. Check it out, that could be your problem. Thanks!

@mrjaycam7086 4 жыл бұрын

I know this is an older video but what size were these?

@sportbiketrackgear 4 жыл бұрын

These were 50mm clip ons. - Van

@mogrady31able 4 жыл бұрын

I ordered 51mm for the 18 r1. Should I get the 50mm or is this a negligible discrepancy?

@mrjaycam7086 4 жыл бұрын

Sportbike Track Gear thanks Van! Matt you’re going to want to get the 50mm.

@Dranreb865 5 жыл бұрын

How does it address the cable's length?

@sportbiketrackgear 5 жыл бұрын

I have never had an issue with control cable length when installing non riser after market clip ons like these. The only time you really need to worry about the cables is when you are looking to install risers on the bike. - Van

@mattmm3062 3 жыл бұрын

What is the torque spec for steering stem nut?

@sportbiketrackgear 3 жыл бұрын

Sorry this was an old video and I do not remember. A quick Google search should get you in the info you need. - Van

@v1nc3ntpham 6 жыл бұрын

At 16:20 i cant move the clamp move further back to original level easy like you although i also use hammer like you. I dont know what’s wrong, it stuck at the head of fork at black adjustment

@sportbiketrackgear 6 жыл бұрын

Do you have the bike on stands or is it sitting on the ground? - Van

@v1nc3ntpham 6 жыл бұрын

I put it on rear axl stand to try, then sat on ground too but it still not work. Should i unload front by front stand?

@v1nc3ntpham 6 жыл бұрын

but i saw 0:30 your bike was on rear stand

@cipher978 4 жыл бұрын

I did this and my steering won’t lock now. What did I do wrong?

@sportbiketrackgear 4 жыл бұрын

To be fair it would be hard to diagnose this without being able to see the bike. - Van

@Smoove233 7 жыл бұрын

So can clip on make the bike a bit more comfortable for street? They raise the bars right, depending on the one you buy?

@sportbiketrackgear 7 жыл бұрын

If you purchase the riser clip-ons then yes, but these particular clip-ons do not raise the bars at all. Thanks for watching!

@Smoove233 7 жыл бұрын

Sportbike Track Gear Okay, thank you!

@ruinerfixxxer 7 жыл бұрын

Caleb Whitted I have a 2015 R1 and was looking to get risers. 3 inch to be specific. I've done some research and it seems you end up hitting the top fairing as well as needing slack in your brake and clutch lines. definitely more involved than regular clip ons.

@Smoove233 7 жыл бұрын

ruinerfixxxer ahhh okay

@Smoove233 7 жыл бұрын

ruinerfixxxer thanks for the info. Overall how do you like the bike for commuting? I know its not best but how do you like it? And what's your height?

@fifthflobasement8046 7 жыл бұрын

Y don't you do a walk around of your bike like a up to date review of what you've done so far and y

@sportbiketrackgear 7 жыл бұрын

This is a pretty good idea!

@jeremiahjohnson5853 2 жыл бұрын

Would this work for a 2020 r6

@sportbiketrackgear 2 жыл бұрын

Yes these will fit on the 2020 Yamaha R6. - Van

@brujohnkb24 2 жыл бұрын

What size clip on is that? 55mm?

@sportbiketrackgear 2 жыл бұрын

The Yamaha R1 uses a 50mm clip on cuff. - Van

@bobbyantonucci8015 4 жыл бұрын

Yo your shrinkin...betta get on the sauce again...

@sportbiketrackgear 4 жыл бұрын

Weight has always went up and down, depends on how hard I am able to get after it. - Van

@halmaten 4 жыл бұрын

And what is difference?

@sportbiketrackgear 4 жыл бұрын

It lowers the clip ons and allows you to adjust the angle as well as the bar length. Also much easier to repair after a crash at the track. With the OEM bars you need to replace the whole unit, the after market stuff allows you to replace just the clip on tube. - Van