How to install H4 or 9003 LED Headlight Bulbs - Tips and Tricks from Headlight Revolution

Рет қаралды 319,444

4 жыл бұрын

All H4 Style LED Foward Lighting Upgrades: headlightrevolution.com/led-f...
In this video, Chris shows how to install and aim some of the most common LED H4 and 9003 bulbs on the market!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Fitment guaranteed! If it doesn’t work, we will solve the problem for you. We strive to give an excellent customer service experience. Our dedication to delivering on that promise is backed by a no-hassle return policy. We’ll provide a full refund on products returned within 30 days, no questions asked.
All Lighting Upgrades For Your Application: www.headlightrevolution.com/?...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Note: This video is for educational purposes only and may show street-use content with products that may not be DOT compliant for use on public roads. The video is not intended to imply vehicle-specific street legality. LED and HID bulbs are street legal in the USA for fog light use and not in low beam or high beam headlights because they are not compliant with DOT / FMVSS108. When looking for on-road-use headlight upgrades we recommend DOT-compliant headlight housings, not bulb replacements. Certain specialty vehicles strictly limited to off-street use and not having DOT registration or license plates may use these products exclusively off-streets. International street legality varies by country. For detailed clarification on-street use, go to www.headlightrevolution.com/s...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Other videos that we recommend watching:
💡 Lighting Color Explained: • HID Color Temperature ...
💡 Are LED Bulbs Brighter than Halogen? • 100W Halogen VS LED Bu...
💡 Are LED Bulbs Brighter than HID? • HID vs LED - Which is ...
💡 LED Bulbs Brightness Shootout - which bulb is the brightest? • Best and Brightest? We...
💡 Which HID Kit Color is the brightest? • Which HID Color is the...
💡 The TRUTH about LED Bulbs! • The Truth about LED bu...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
For the best LED automotive lighting selection in the world, check us out here: headlightrevolution.com
If you have any questions about any of our products, email us at Sales@HeadlightRevolution or give us a call at (218) 755-5200!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Find us on social media!
TikTok: / headlight_revolution
Facebook: / headlightrevolution
Instagram: / headlightrevolution
Pinterest: / headlightrevolution
Twitter: / headlightrevolu
LinkedIn: / headlight-revolution
We Do Lighting Better Because We Test!

Пікірлер: 283

@thewcalame506 3 жыл бұрын

Explaining the shield is something that many others have neglected. Thank you so much. This is by far the best explanation that I have viewed.

@HeadlightRevolution 2 жыл бұрын

Glad it was helpful!

@mudzryrahim9130 2 жыл бұрын

@@HeadlightRevolution 0

@CptSlow89 2 жыл бұрын

@@HeadlightRevolution True but on my motorcycle, high beam shields are opposite that in your video and light is great.

@yuchub7389 Жыл бұрын

The best tutorial videos here in youtube🔥

@tiggertail 3 ай бұрын

You saved me! I am crying out of joyI found this video brother !

@ChrisOnline1 4 жыл бұрын

It was a pain in the ass when I tried installing the led bulbs on my sister's Yaris and trying to figure out the proper alignment. Now I finally understand the proper way to align the bulb. Thanks!

@wildscorp Жыл бұрын

This video was big time helpful! I watched a lot of videos trying to figure out how to upgrade my 2002 Tundra to led headlights and yours was the only one that solved the mystery on how to incorporate the dust cover by showing how the collar comes off the led bulb. I still had to modify the dust covers some to allow the bulbs to fit right and yet, now the leds work great and still have the protection of the OEM dust cover. Thanks a lot! 👍

@eeec7 11 ай бұрын

Should I cut the dust covers a little bit? If so, where?

@905nite 4 жыл бұрын

Thank you. The 9003/H4 bulb for me was the hardest bulb I've ever had to install. Particularly on a 2012 Honda CR-V EX. 🤬

@ericbateman5491 3 жыл бұрын

Perfect explanation of the H4. Thank you!

@HeadlightRevolution 2 жыл бұрын

Glad it was helpful!

@tommyo777 2 жыл бұрын

Thanks! This, and your video about LED types has helped me make an informed purchase and I expect, a smooth installation/alignment.

@HeadlightRevolution 2 жыл бұрын

Glad we could help!

@Panda.0038 10 ай бұрын

This video is 2 years ago but it still helped me thanks

@keithdavison7357 4 жыл бұрын

Thanks for the video. I recently bought another type of led that was three sided. So wasn't a issue. I just bought a new set and it had the half moon cup and I had known idea if the cup went up or down. I would of assumed up to keep the low beam pointed towards the ground. But you say it goes under. Thx

@Pm9x6jh Жыл бұрын

Awesome, helped me install my bulbs the right way

@jimdimaano9181 3 жыл бұрын

I'm glad I found this video. Thanks, man!

@HeadlightRevolution 3 жыл бұрын

Glad it helped!

@gelan1212 Ай бұрын

Thank you very much, it’s the only clear explanation I’ve ever found.

@HeadlightRevolution Ай бұрын

Glad it helped!

@greatmystery11 3 жыл бұрын

Thanks for your efforts, they are appreciated!

@HeadlightRevolution 3 жыл бұрын

Not a problem, we are always here to help! Let us know if you need anything else!

@davidnhowe6628 Жыл бұрын

Thank you for explaining on the rubber cover had put mine without the cover just got back from putting it on lol

@dand3841 3 жыл бұрын

Great video. Thanks for taking the time to make it.

@HeadlightRevolution 3 жыл бұрын

Thanks for watching!

@03Lorac 10 ай бұрын

The best video. Thank you!

@DVDiclan 4 жыл бұрын

Nice informative video. Personally would have liked to see some beam pattern comparisons of the different H4 bulbs as I can't find any of your bulb shootouts that feature H4 bulbs and I'm thinking of getting the new GTR Lighting bulbs. I'd like to point out that when I installed LED H4 Bulbs in the past, I found out that the alignment isn't supposed to be perfectly straight 12 o'clock when I referred to the stock halogen which was slightly off by about a notch and this gave me the best beam pattern. This may be vehicle specific but still something to look out for. Keep up the good work guys.

@brat_paq Жыл бұрын

I just learned from this video that the shield is facing up I thought that should be easy, just point it at 12 o clock. Now I read your comment and it's not exactly 12 o clock. Now I think I should focus the original halogen on a wall and trace the pattern on the wall. Then put the led bulb and make sure the pattern are the same as the original halogen.

@h0sx 3 жыл бұрын

I have chevey cruze 2017 middle east H4 bulb, it works installing LED headlights 🤩🤩🤩🤩 Thank you Chris 💜

@HeadlightRevolution 2 жыл бұрын

Nice 👍

@rio20d 4 жыл бұрын

got some questions, if you look at the recent release of Toyota cars like the corolla and rav 4 , seems like they all uses LED headlights but interestingly enough they use both the typical LED projector headlights which has been around for a while now but also a parabolic led headlamps ( which is not projector base but using reflector in it). What's your view on that? I would like to know, thanks

@bitokstv777 6 ай бұрын

Thanks a lot sir. On your demo, I easily installed my new LED headlights...

@HeadlightRevolution 6 ай бұрын

Glad it helped

@rontanuecoz 4 жыл бұрын

now i know how to identify if my led bulb is correctly installed how does it looks like with the stock halogen light... thanks much... love watching all your videos!!!

@HeadlightRevolution 4 жыл бұрын

I'm glad we could help out!

@toomasbaunis343 Жыл бұрын

Great job explaining led installation procedures. I've got a 1986 Winnebago motorhome with sealed beam headlights. I purchased new 4x6 Halogen lenses only. I can now fit led bulbs into the lamps, but the sealed beams have a 2 blade and a 3 blade socket. Is there an accessory pigtail available on the aftermarket to complete the connection so I can have led lights? Can i get a led pigtail from a dealer trim off the old bladed sockets and rewire to complete connection?

@marko9138 4 жыл бұрын

Will this work with the headlight leveling dial on a 2020 Toyota Tundra?

@eladioleon160 3 жыл бұрын

Hi I’m getting the led auxito h4 led 9003 to replace the old bulbs in my Chevy bel air 57 are they will fit?

@ClarkSaintil 7 ай бұрын

Good job, verry important

@AnDroid-cq3sr 4 жыл бұрын

Thanks you so much to solve misery between the lock pin and dust cover .

@HeadlightRevolution 4 жыл бұрын

Thank you for watching!

@bobmyrick3564 Жыл бұрын

Howdy, Outstanding presentation, you sir have an excellent way to explain these lighting products. Thank you

@HeadlightRevolution Жыл бұрын

Thank you!

@lfc214 2 жыл бұрын

the meaning of perfect can be found in this video 👌👌👌

@HeadlightRevolution 2 жыл бұрын

🤘🤘🤘

@dipankardas1760 4 жыл бұрын

Have you done any video or comparison of hikari ultra led h4.

@elbertkim55555 Жыл бұрын

This is awesome!

@HeadlightRevolution Жыл бұрын

Thank you for the supportive comment!

@murry001 4 жыл бұрын

THANK YOU! I was wondering how to get them installed properly :) :) :)

@HeadlightRevolution 4 жыл бұрын

You're very welcome, thanks for watching!

@anm0604 3 жыл бұрын

this is the best guide

@parthap2944 3 жыл бұрын

Please tell me how to Install an LED headlight in Yamaha FZ V2 with upper and lower beam properly working .

@shawngixxer 3 жыл бұрын

Hi, my 2014 Honda CR-V calls for 55/60 watts, if I replace the bulbs with 100/90 watts if my wires get to hot over time?

@squirrelkiller3589 4 жыл бұрын

Great video, quality content

@HeadlightRevolution 4 жыл бұрын

Thank you, glad that you liked it!😄

@lenroythomas9766 7 ай бұрын

Love this information very helpful 👏 👌 👍

@HeadlightRevolution 7 ай бұрын

Glad it was helpful!

@muhdizhar8746 10 ай бұрын

Thanks for video

@csvpresents8978 Жыл бұрын

Very good detailed explanation...thank you.

@HeadlightRevolution Жыл бұрын

Glad it was helpful!

@libborr Жыл бұрын

Thanks much for help. Before watched this vid I installed them and it dazzles drivers too much. Do you think I should turn around them?

@HeadlightRevolution Жыл бұрын

Yes please make sure to check the adjustment of your headlight.

@vinoth20294 4 жыл бұрын

Please explain about headlight base. And which one is commonly used in H4 bulb 43t or 45t? What about H7 bulb..?

@tommygomez6298 11 ай бұрын

Great video! I have a question... Do all H4 bulbs have both high beam and low beam?

@johnkolar8466 Жыл бұрын

I got termitor 9003 led bulbs for my 04 tundra installed them now my high beams don't work however if I put one halogen bulb in and one led bulb my high beams work again it don't matter what side any ideas

@KANEandLYNCH3 Жыл бұрын

I’m curious: my dust cover doesn’t have a hole in the center, and is just a cap that closes off the housing. How do you recommend navigating that with an LED bulb’s heat sink and cable? Is it advisable to just not use the dust cap?

@marcomerito6049 2 жыл бұрын

Super! Great Video

@HeadlightRevolution 2 жыл бұрын

Thank you very much!

@GOD1SF1RST 2 жыл бұрын

Very good video. Thank you

@HeadlightRevolution 2 жыл бұрын

Thank you too!

@JOHNMINKA 3 жыл бұрын

i have fitted a cob led bulb to my motorcycle i get low beam i don't get high beam . i notice if not enough power on battery it switches to low in instructions so i put charger on to a battery doing 13.3 volts STILL NO CHANGE only get low beam could it be a faulty bulb or is it not the same connections as a h4 socket. regards john

@DanielLee-qy1yu 2 жыл бұрын

Thanks Bro Really helped

@HeadlightRevolution 2 жыл бұрын

No problem 👍

@jakeconcienne6274 4 жыл бұрын

Thank you!

@HeadlightRevolution 4 жыл бұрын

Thank you for watching Jake! -Chris W

@craigk5505 Жыл бұрын

I installed the SEALIGHT H4/9003 LED Bulbs on my honda element. They look great but when the truck is turned off they still give off a low glow for hours. Not sure if it's power stored on the driver or a low current. Truck starts up fine but still concerned

@360.Tapestry 7 ай бұрын

thank you! i needed to know how to navigate that dust cover

@HeadlightRevolution 6 ай бұрын

No problem!

@nightrider4594 9 ай бұрын

Thank you.

@RomboutVersluijs 11 ай бұрын

Why does the lee bulb have such a long cable. Won't that cause issue in wet conditions?

@BulletSpoung 4 жыл бұрын

In the US we have more Toyota RAV4s on the road than any other car or SUV made yet you have no KZfaq video on them. We have a 2015 RAV4 and would like to replace the H/L and driving lights with LEDs but I can't find any good info.

@carlosdaudet6821 4 жыл бұрын

Great video! I would like to see the beam pattern using same brand and type of led bulb in both the two headlights in this video. Specially the Honda, comparing halogen beam pattern with led beam pattern

@HeadlightRevolution 4 жыл бұрын

We will add that to our list of videos!

@HARRUMPH-SAL 2 жыл бұрын

Great points on the shield and bulb positioning. My son's 99 Camry uses 9003 bulbs, which we switched to LEDs. They are "4 side" bulbs. Is there a proper way to identify on the bulb which way they install? Does it matter? Thanks!

@HeadlightRevolution 2 жыл бұрын

4 sided bulbs will not focus properly, if you're going to run them it doesnt really matter how they face in there.

@ryansingh6152 2 жыл бұрын

Thank you for the beam explain

@HeadlightRevolution 2 жыл бұрын

No problem!

@user-ys4rg4xs5l 3 ай бұрын

very good

@socal_gambler 4 жыл бұрын

Are you going to do a H11 video?

@josephcedatoljr.7562 4 жыл бұрын

Could you help with my Opt7 Flux v2? I have a 2009 Tacoma and have them installed as you showed. However, I noticed that there is no seal other than the tip seal. I am constantly getting flashed for having high beams on. My adjustment with my OEM lights is fine. Is a readjustment needed? I will admit they ARE bright. Also, when I put my high beams on, there really doesn’t seem to be any change in the light. Any comments? Thanks.

@HeadlightRevolution 4 жыл бұрын

You should always readjust the headlights after installing new ones, Especially if you’re getting flashed. It may not seem like they move much, But they do!

@astindersinghera766 2 жыл бұрын

Great video, well explained. What led bulb do you recommend for 2004 Mazda Tribute, it uses H4/9003 bulbs. Also would like to have led bulbs that have low and high beams both. I can’t find led bulbs that has both beams. Is that by design? Thanks so much

@HeadlightRevolution 2 жыл бұрын

I would suggest reaching out to our CS team so we can go over some options with you! 218-755-5200 Sales@HeadlightRevolution.com

@richardstamper5630 Жыл бұрын

I have seen some LED H4 lamps being offered locally but they say it needs an adaptor kit? Looking at your example I can't see any adaptor. The shop tell me that if plugged directly into the old plug then the voltage is too high but it doesn't say anything about that on the packaging. Hope you can help.

@HeadlightRevolution Жыл бұрын

Never heard of that, almost sounds like a gimmick to sell you an extra piece!

@moazdaza7275 2 жыл бұрын

Perfect video! so informative and to the point! one question, H4 (7,11 etc) are those numbers different sizes? (like do h4's have a shorter LED base? in a way that the LED would be in the same sweet spot to be focused by the housing just like the original Halogen light? ) or are these numbers for a different power/higher level/quality etc.?

@HeadlightRevolution 2 жыл бұрын

These are different, the base of the bulb, the plug, the LED placement, etc, will all be different based on the size of the bulb. With the stock halogen bulbs, this number could mean a difference in power as well though. For instance, 9006/9012 are the same minus the top tab on the bulb being a little wider and the 9012 generally uses 10-15w more power. It is common for people to trim the larger tab on the 9012 bulb to fit into a 9006 housing since the 9012 is brighter.

@moazdaza7275 2 жыл бұрын

thank you so much for explaining, sharing your info/knowledge and for your time! May Allah Bless you and guide you to what is best for you in this life and in the hereafter! ❤

@abdulwahidchangazi 4 жыл бұрын

Please review the high beam offroad (drifter) headlights ... Thanks

@HeadlightRevolution 4 жыл бұрын

We'll add them to the list!

@justatiger6268 4 жыл бұрын

Thank you for this great video. However, I would like to know a bit more about the differences between them. Specifically, ones that have fans and those that don't; are the fans going to accumulate dust and break? Will the entire LED bulb then overheat and simply stope working? And conversely, are the fanless designs better in this respect or worse on account of poor head dissipation?

@HeadlightRevolution 4 жыл бұрын

The fan based bulbs typically are brighter because they can be run harder. We used to see more fan failures when LED bulbs first came out a few years ago, The new ones work a lot better and it’s almost entirely a non issue. I’d personally only run a fan based bulb now for maximum brightness. -Chris W

@justatiger6268 4 жыл бұрын

@@HeadlightRevolution I feel so stupid for writing this. I've seen your other videos now and i plan on watching all of them because they are very good indeed. Thank you Chris!

@HeadlightRevolution 4 жыл бұрын

No problem at all, That is why we are here! Let me know if you need help with anything else.

@eddiemaranan6790 Жыл бұрын

Thanks

@NewAdventureBlack Жыл бұрын

Can I install H4 LED in H13 halogen headlight? What I have to change? The reason I ask this is because I want to use a producer who make only H4 LED not H13 LED. Thanks!

@arkhamvida9479 3 жыл бұрын

My 2011 Kia Soul doe not have a dust cover, but an overall cap that goes over the light mounting. What options do I have to fix this? Do I put the cover on again? Or leave it open? I didn't see anything in your video about this.

@HeadlightRevolution 2 жыл бұрын

No need toadd one if it doesnt come with one!

@bongwoophet Жыл бұрын

would the h4 fit my 2007 honda vtx 1300c? Alla Lighting thinks it may fit. Please advice and thank you per request.

@HeadlightRevolution Жыл бұрын

Hey Robert! We can help, please email us with photos if you can so that we can help you! Sales@HeadlightRevolution.com

@vman78vk 4 жыл бұрын

I have a 2006 sentra and bought a Beamtech LEDs H13, when I installed the bulbs and was turning them to the right I was expecting some sort of a snap or a tension of some sort. Nothing, so I just left it like that, and ofcourse when I drove to work, after 25 miles the bulb came out of its housing and just dangled there. Anything I can do to fix this ? Thanks.

@HeadlightRevolution 4 жыл бұрын

It sounds like that may be an issue with the bulb itself. I'd reach out to who you purchased them from, and see if you can get a replacement.

@erickpalos23 3 жыл бұрын

You mentioned a shield, how about if my new led buld doesn't have it? Should i just place it facing horizontal?

@HeadlightRevolution 3 жыл бұрын

You should still place that so that the LEDs are facing left and right! It is very rare that there is a housing that needs them aligned in a different position!

@101shadowstar Жыл бұрын

I have a 01 pathfinder so I just wanna know what do I do wit the wires feels like it’s not all gunna fit

@HeadlightRevolution Жыл бұрын

They can usually be tucked into the headlight housing, but each application is different!

@Ben24-7 Жыл бұрын

I bought some cheap no brand leds H4 bulbs and when switching from low beam to high beam there was hardly any difference, is that normal for all Led bulbs , or is it because I bought cheap knock off's, Thanks for the video

@kokotiong 3 жыл бұрын

Do you have to modify the dust cover to go over the Morimoto on a 2000 Toyota 4Runner? It doesn't seem to fit over the fan?

@HeadlightRevolution 3 жыл бұрын

You may have to modify that dust cover, and some vehicles just do not work with those LED bulbs. If you are having trouble with that, just shoot us an email and we will be happy to help! Sales@HeadlightRevolution.com

@eugenecastro 3 жыл бұрын

This is a great video to watch prior to installing the h4 9003 led lights. I was able to install it properly with your video. The only issue i have after installing my led is that its always ON even when the switch is OFF and the AUTO doesn’t work as well. Basically it’s always ON. Any advice on how to fix it would be much appreciated. Thank you

@brian_2040 3 жыл бұрын

Eugene, you must be referring to the daytime running lights. There are ways to turn them off. But it's a safety thing, I'd leave them on, it can't be that bad on the bulbs.

@SS-gc6bp Жыл бұрын

Can I change the bulb only on the same fitting/housing on a fiat 500 or do I need a new housing ?

@HeadlightRevolution Жыл бұрын

You can just change the bulb!

@krishanjeetsingh1567 3 жыл бұрын

Can we adjust the beam pattern in H4 led? In my car led is slightly tilted i am not able to rotate it (can’t find the screw to remove and align it according to my wish)

@HeadlightRevolution 2 жыл бұрын

Check out this video! kzfaq.info/get/bejne/f9qJnrmpsL6ohZs.html

@alejandrolucero147 Ай бұрын

Can I use the 9003 h4 sylvania for headlights even if it says fog use only in va I am blinded by people's leds

@HeadlightRevolution Ай бұрын

If your OEM Headlights use a 9003/H4 Bulb type, then yes you can use the Sylvania bulbs.

@davidrus 4 жыл бұрын

C6 H4 led on Intruder VS800 motorcycle. Installed the right way, but the low and high beam are reversed. Any ideas ?

@HeadlightRevolution 4 жыл бұрын

That sounds like that may be an issue with the bulb. I suggest reaching out to who you purchased them from and see if they can send you a replacement.

@vikramanandraj7013 4 жыл бұрын

I bought a pair of idrop focus beam rs mini h4 leds the high beam and low beam is reversed on one side i saw that on the faulty side the bulb was installed upside down but i tried to put it the right way but there wasn't a way to do so, could it be the mechanic's fault or is it a manufacturer defect ,please advise

@HeadlightRevolution 4 жыл бұрын

You might have to loosen a screw on the collar and adjust it from there.

@dann5480 Ай бұрын

Great video. I have a question. I got the dust covers on after the LEDs so that the fan assembly and heatsink are inside the rubber dust cover and completely sealed up. Only the wire is protruding which I also sealed with electrical tape. Will it cause issues with overheating? Is it important for the fan to be exposed to outside air? Appreciate your videos a lot. Thanks.

@HeadlightRevolution Ай бұрын

No, you don't have to worry about overheating! We do recommend using the dust cover and having the fan enclosed in the headlight.

@dann5480 Ай бұрын

@@HeadlightRevolution Thanks!

@spydernutz 3 жыл бұрын

On a Toyota Fj Cruiser how do you reinstall the rubber boot with LED bulbs. The heat sink can't be covered. Thanks

@HeadlightRevolution 2 жыл бұрын

I would suggest reaching out to our CS team so we can go over some options with you! We have some extended dust covers available! 218-755-5200 Sales@HeadlightRevolution.com

@GENX80. Ай бұрын

What about the heat can a load resistor help with that and how do i know which resistor to get??

@HeadlightRevolution Ай бұрын

H4 bulbs do not require a load resistor, resistors are for turn signal bulbs! You might be thinking of an H4 PWM module, which we can help make sure you get the proper one needed! Sales@HeadlightRevolution.com

@wkduff 2 жыл бұрын

Thank you for explaining the shield but I'm trying to figure out where you plug it into. There's no KZfaq videos. How to plug these in.

@HeadlightRevolution 2 жыл бұрын

If you are referring to the dust cover, it just screws into the headlight housing.

@wkduff 2 жыл бұрын

@@HeadlightRevolution no the cable, I went to Canadian Tire and they said this would work in my car. I cannot find the plug to install it in a 2010 Kia soul.

@CptSlow89 2 жыл бұрын

My h4 leds were instaled with up and down shield and it was fine. Now I bought the same set and pattern looks weird and low beam is so bad. I will try to turn the shields to 3 and 9 position.

@HeadlightRevolution 2 жыл бұрын

Yep!

@CptSlow89 2 жыл бұрын

@@HeadlightRevolution Tried, they locked somewhere in between 9 and 3 but not exactly 9 and 3.

@aziaazia540 Жыл бұрын

I have 2016 Nissan Sentra I try so many LED light it doesn’t fit to the base of the headlight. I used H11 led still doesn’t work what do you recommend think appreciate

@HeadlightRevolution Жыл бұрын

Please reach out to our customer service team so we can get some pictures and match something up for you! 218-755-5200 Sales@HeadlightRevolution.com

@InBoostWeTrust7MGTE 4 жыл бұрын

i was so hoping to see the light output of this H4 bulb

@HeadlightRevolution 4 жыл бұрын

Check out our Toyota Tundra bulb shootout video, It uses H4! -Chris W

@berkeakdemir3515 3 жыл бұрын

Hi there, which brand would you recommend for me to use for my car? I want the best LED. (My bulb socket is for h4)

@HeadlightRevolution 2 жыл бұрын

Reaching out to our CS team would be the fastest way to get some help, give us a call or email! 218-755-5200 Sales@HeadlightRevolution.com

@shanefoote4808 4 жыл бұрын

Should show what to do with the extended cable and plug length on the LED’s...

@HeadlightRevolution 4 жыл бұрын

Depending on the headlight and the truck, You can either fit it into the headlight with the factory dust cover or zip tie it neatly outside the headlight. -Chris W

@tjbay13 3 жыл бұрын

yup. im sittin here trying to plug the damn thing together and it doesnt want to fit. so, for starters, that sucks. would like to see it demonstrated.

@christiannefarias4923 Жыл бұрын

How about the weather protector? Do we need to put it back?

@HeadlightRevolution Жыл бұрын

Yes, the dust cover should be reinstalled.

@stevenrodriguez1615 3 жыл бұрын

So how do I do it if the light goes out? I have the lights that have the fan attached, in a 1998 jeep cherokee sport

@HeadlightRevolution 2 жыл бұрын

I would suggest reaching out to our CS team so we can go over some options with you! 218-755-5200 Sales@HeadlightRevolution.com

@mara69323 3 жыл бұрын

Do I have to remove the cups, the one that hides the bulb reflect back to filamen

@HeadlightRevolution 3 жыл бұрын

You will be good to go with those, you can leave them right in that headlight housing!

@takeapieandrun 3 жыл бұрын

Converted my motorcycle from H7 to H4.. needed to know which way the shield faces. Thanks

@HeadlightRevolution 2 жыл бұрын

The shield should face open side up!

@benson098123 4 жыл бұрын

Could you do a test of 9003 gtr ultra 2 bulbs?

@HeadlightRevolution 4 жыл бұрын

We have a few videos coming out on those bulbs, I believe one of them is 9003 based. -Chris W

@ironhorsegladiator5034 2 жыл бұрын

The exposed side not covered by the plastic insulation is okay?

@HeadlightRevolution 2 жыл бұрын

Yep!

@mikeburton5482 3 жыл бұрын

I am trying to do my 2000 ttr 250 yamaha but it is a combination of h-4 and older style bulb. Its a pain.

@HeadlightRevolution 3 жыл бұрын

Sorry to hear that, and I hate to say that I am not sure of the bulb you are referring too! If you could shoot us an email, we would be happy to get you a recommendation! Sales@HeadlightRevolution.com

@derekhuber3392 4 ай бұрын

A video of the Morimoto 2Stroke 4.0 would be nice since it has a square body now.

@HeadlightRevolution 4 ай бұрын

Will require custom wiring and 1x Ford PN# 8U2Z-14S411-AAC. See Install Guide for more information.

@pablitogmr8021 Жыл бұрын

I bought a h4 led but the shield was missing. Any reason?

@HeadlightRevolution Жыл бұрын

Reach out to our customer service department, 218-755-5200 Sales@HeadlightRevolution.com

@javierpenarandach.1756 7 ай бұрын

Great video! Still, I simply don't get it, why is it so many people and reviews indicate light bulbs to be h4/9003? I mean from what I understand they are different, like h4 cannot replace 9003 or viceversa, am I wrong?

@HeadlightRevolution 7 ай бұрын

In the LED world, they can! The connectors are the same, but the bases would be slightly different. With LEDs, you just get a universal base for both applications.

@tthoy7338 3 жыл бұрын

Is it absolutely necessary to re-install the OEM rubber boot over the H4 LED because if I do the rubber boot will cover over the cooling fins. The instructions do not say to re-install the OEM rubber boot. Do I really need the rubber boot at all? It will certainly run much cooler without the rubber boot

@HeadlightRevolution 3 жыл бұрын

You will definitely want to use that OEM Dust cover, that will keep the majority of the dust and debris out of the housing, and will allow for your headlights to last longer! Let us know if you have any other questions, we are here to help!