I just picked up a second hand x748 and this was my reference, very very very useful!

This video is very helpful as I would rather see the procedure as opposed to reading it in a manual. Thanks

A few Steps he says"" I am dreading this.. LOL Im going to have to watch this several more times!!

I tried taking the mower off in the yard, then had a heck of a time trying to move it. Best spot i found was in front of the garage. After the deck is off just use a pry bar to raise the deck and lower the wheels. It rolls easy on concrete into the garage for winter storage

HE IS A BEAST

Great quality!

I have a 445 bought it in 1996 time for new one great mowers

I love my X739...

I love John Deere so much I have a John Deere 112. I am restoring in high school John Deere would you help me Restore it all

Great video, this has been very helpful to me as the owner of a new X738 with auto-connect. I followed the procedure in this video to remove the mower deck. Then disconnected the auto-connect drive shaft from the tractor and hung it into the U-shaped bracket as shown. But then I found it very difficult to raise the auto-connect assembly high enough to be able to latch it with the storage hook. Finally I used the hydraulics to lift the auto-connect assembly all the way up and was then able to latch it in the up position with the storage hook. Two questions: 1. Should I need to use the hydraulics to lift the auto-connect assembly? It looks so easy in the video and the video does not mention using the hydraulics. 2. Once the auto-connect assembly is latched in its up position, does the hydraulic connection to the auto-connect assembly need to be 'shut off' in some way? Or will the hydraulic connection to the snowblower simply override the connection to the auto-connect assembly? Thank you.

I had a real struggle to get the drive shaft quick release collar off the PTO on my X477. Finally got it off by pulling the collar back with one hand and pulling the whole mower deck back to pull the shaft away from the PTO. When I was a ready to put the mower deck back on, I lubricated the collar and then put the drive shaft back onto the PTO and tried some mowing. But the shaft fell off, seemingly the collar hadn't clicked onto the PTO properly. Now The collar seems to be stuck in the 'back' position so I haven't tried to put the shaft back onto the PTO. Any idea how to get the collar to release itself?

can you make a video on how to install a mower deck on a GX345 thanks i am missing some parts and i want to know what i am missing

Just went through this exercise without a manual and put a new belt on a 7 Iron 60 inch deck on my 2012 740. I was ready to trade it in for something else by the time we were done. Don't know how you could do it with only one guy! Are the newer decks and tractors easier to remove and reinstall?

how to change a spark plug in a yard machine riding lawn mower

i wish i had enough grass to cut to get one of these nice green and yellow toy😁

Does the PTO go above or below the lift arms?

seria possível mandar explicações em português? obrigado!

I'm quite happy to spend an extra 2 minutes attaching the clutch cable and five cotter pins to secure the mowerdeck on my $3,000 Husqvarna yardtractor and save myself $10,000 relative to an over-priced John Deere gardentractor.

Does the deck drive shaft have grease fittings...I have they are expensive to replace....

my draft arms won’t come down. any ideas? it’s unlocked and only moves up and down minimally with the hydraulic control lever.

Installed the deck, now there is this loud click sound when I raise and lower the deck. Any idea what that could be?

I wish our Husqvarna had the same features as the mowers in the video

I have a x729 and there's a hose I have new clew what it is please respond johndeere

cat costa

"Without the physical work of moving the mower deck around by hand." There is one big catch here. Once the deck is removed, it is in your lawn all the way to the ground with the wheels disengaged, so you can't roll it away. If you could quick-disconnect in your garage where you want it stored, that's one thing, but to require that the wheels be disengaged and that the deck be removed out in your lawn, leaves a lot more "physical work of moving the mower deck around" compared to other systems. I just tried it for the first time and I couldn't move the deck out of the lawn, nor could I lift it while setting the wheels myself without first getting a jack to lift up each corner to put the wheels back in play again.

Isn't this the guy that narrates for the History channel? I'm pretty sure it is. Lol

I can’t adjust my control nob, it’s like it’s locked in place

Crazy amount of steps. And looks like very risky driving over it. If you forget something you could have a serious problem driving over it.

who would want to remove the deck in the middle of the lawn?

Running over a JD mower deck, is the best thing you could do for it. A D9 dozer is best for this. Most of their residential mower decks is a waste of good sheet metal and yellow paint. I am the unhappy owner of 2 of them.

And this is supposed to be easy?

i dont get how people can afford these things my neighbor just bought an x750 and it cost him $16k+ My truck didnt even cost half of that and its a 2014 model.

Not simple. Have a Kubota gr2120, deck removal replacement is about half the effort.

This tractor set up is garbage. More trouble with this than any other product I purchased. Hydraulics don’t raise or lower tractor except when they want to. More safety shutoffs than any product should have. Worst purchase ever. X758, mower deck, snow blower, tiller. Never again.

nice vid. :) i have a 08 jd x724 with a 62" deck, the problem im haveing is that my deck is hiting the steering rods for the rear tires, x724's are 4ws tractors. u can see where its hiting, soo i dont know if theres a fix or do i just get a new tractor.