How to install your clutch assembly

No video

How to install your clutch assembly - 1967 Ford Mustang

Рет қаралды 15,260

Alf's Mustang Garage

Күн бұрын

Пікірлер: 40

@AlfsMustangGarage 3 жыл бұрын

We are here to keep your classic Mustang on the road and out of your garage. Subscribe to the channel and click on the notification bell. kzfaq.info/love/Zi2JnDfxDHwqJoxJzFnIlA

@joshgsx 3 жыл бұрын

Never Forget the spacer plate.

@AlfsMustangGarage 3 жыл бұрын

Oh hey Josh!

@claytonhancock8774 3 жыл бұрын

Thanks so much for all these super helpful videos! I’ll be inheriting my grand dad’s 1964 1/2 289 4 speed in a couple months and it’ll need a lot of work. Looking forward to using your channel for tips and tricks. Keep it up man!

@AlfsMustangGarage 3 жыл бұрын

Oh man that's awesome! I hope you take good care of it and one day you can pass it down to your grandkids! I hope you find lots of helpful stuff here. I'll keep it up as long as I can. Thanks for taking the time to comment and subscribing!

@BBAILEY466 2 жыл бұрын

Very good video, I will be using these tips for my install on my 64 Ford Galaxie with 460 and Top Loader.

@AlfsMustangGarage 2 жыл бұрын

Oh awesome! That sounds like a monster!

@mrfixit8776 3 жыл бұрын

I definitely need to get that Snap-On digital torque wrench. The one I'm using is the Snap-On torque 3/8 head click wrench with manual rotation settings.

@AlfsMustangGarage 3 жыл бұрын

Oh my gosh, ya some tools are well worth the money.

@Drake-Edwards 3 жыл бұрын

This video is awesome! Helped me so much. Thank you! 👍

@AlfsMustangGarage 3 жыл бұрын

You're welcome. One thing I forgot to put in the video, is putting lock tight on the threads of the flywheel bolts. That's something you'll want to do if your crankshaft has pass through holes. Thanks for commenting and subscribing!

@EZChef 3 жыл бұрын

You forgot the loctite! Love your vids by the way.

@AlfsMustangGarage 3 жыл бұрын

Thank you!

@EsTaMosDeRuta 2 жыл бұрын

Thanks for make all that great videos! I have 65 mustang with automatic transmission So I’m swapping to manual I m ready to install the flywheel 157 tooth This Flywheel can be used in 3 different configurations (depending on the vehicle) with the included counterweights, dowel pins and hardware. 0oz. for Internal Balance applications and 28oz. or 50oz. for External Balance applications. Can u tell me witch counterweights can I use? Your videos motivate me to do All this work I have the 4speed toploader already and all accessories to install in this year! Thanks ! You do a great videos ! Have a bless and great day!

@AlfsMustangGarage 2 жыл бұрын

So I'm just assuming here so this may not be the correct answer but I will do the best I can with what limited information I have about your build. If you have a stock 289 with a 28 oz balancer on the front of the crankshaft, you'll probably want to run the 28 oz flywheel.

@dan827 2 жыл бұрын

Whatd u pay for the 4 speed if I may ask?

@AlfsMustangGarage 2 жыл бұрын

I can't remember, would have to go through my records. Probably in the $2200 range plus bell and shifter, and clutch.

@maxierex6036 2 жыл бұрын

Don't forget to clean the flywheel to remove any oil or Grease

@chevroletbelair1 2 жыл бұрын

What part number bolt did you use for the clutch to flywheel? Are these shouldered bolts? How long are the flywheel bolts? 1" long thread? Thanks for the vid

@csnell205 2 жыл бұрын

Do you have videos on removing and installing the transmission?

@AlfsMustangGarage 2 жыл бұрын

The only thing I have is my conversion video. The automatic comes out and in part 2 the manual goes in. kzfaq.info/get/bejne/rLOUn6mdl9mrkYU.html

@AlfsMustangGarage 2 жыл бұрын

kzfaq.info/get/bejne/hcCSh9mXz6zeqYE.html

@MrGene95 6 ай бұрын

Alf, I just completed this swap. When I rev the car in neutral, getting a really bad vibration. I have not driven it yet. Do you what that might be. Could the flywheel be out of balance?

@AlfsMustangGarage 6 ай бұрын

That is hard to determine from here. But yes the flywheel could be out of balance. But also was the correct weight flywheel used? These small block engines are externally balanced so if there is a 28 ounce crankshaft harmonic balancer, then the flywheel needs to have a 28 ounce to match.

@adawilso 4 ай бұрын

Look at this hot shit with his cool snap on torque wrench. I bet you think your better than me? Lol. Well he probably is...good video though. Thanks man

@AlfsMustangGarage 4 ай бұрын

😂😂😂

@carsonanderson89 3 жыл бұрын

Do you have to have a new flywheel to install a diaphragm cluch setup or different clutch fork??? I have all original 3 finger setup

@AlfsMustangGarage 3 жыл бұрын

The clutch fork and flywheel are the same if you're using an original style clutch. The only difference is the pressure plate and disc.

@carsonanderson89 3 жыл бұрын

@@AlfsMustangGarage some say when you go to a diaphragm setup you remove the return spring as it's was lighter then an original 3 finger ???

@AlfsMustangGarage 3 жыл бұрын

The return spring on the clutch pedal or on the equalizer bar? Either way, I've never heard that. But I don't talk to a lot of other people😂😂😂

@ddaytona1 3 жыл бұрын

Is the spacer plate different between an automatic and manual?

@AlfsMustangGarage 3 жыл бұрын

Yes. The automatic will have a removable cover at the bottom for torque converter nut access.

@okgo8315 2 жыл бұрын

What happened to the Spacer Plate? Thanks.

@AlfsMustangGarage 2 жыл бұрын

Lol watch a little further down, I figured out that I forgot it 😅

@okgo8315 2 жыл бұрын

@@AlfsMustangGarage ...🤣🤣🤣 I had to change the clutch plate on my 66Mustang convertible, 6cyl. 4speed manual (obviously), many many decades ago with almost no tools or equipment here in Rome..... by myself. Jacked it up onto 2 builders planks, in the road, pulled the gbox out alone, very heavy and uncomfortable, but got the job done and it was fun. Thanks Alf from Rome👍🇬🇧

@chevroletbelair1 3 жыл бұрын

is it a 3 speed original clutch and flywheel? or on what car did you order it?

@AlfsMustangGarage 3 жыл бұрын

This is a 4 speed and this is not an original clutch. The flywheel is original but we used a LUK clutch.

@burritos1000 Жыл бұрын

I take it that this is a 10" clutch. I have an 11" clutch on 351C with 3-finger pressure plate. I went with diaphragm style, but the bolt pattern was different and would not work. Would you know why the difference? The bolt pattern that I need is the same as the one being installed in this video.

@AlfsMustangGarage Жыл бұрын

I'm afraid I would not know why there is a difference. The clutch I used in this video is a 10" LUK clutch and this is a small block Windsor.

@burritos1000 Жыл бұрын

@@AlfsMustangGarageMine was LUK set as well. It seems that for the 11" clutch, the diaphragm clutch plate has different bolt pattern than the three-prong plate. The three-prong has the bolt pattern in somewhat a triangle pattern with three pairs of bolts with the pair of bolts closer together. Just like yours. I returned mine and put the 30yr old clutch plate back on. New disk, though. Not too worried since I only put few hundred miles in a year. Thanks for the reply!