How To Install Your PRx Performance Folding Rack 👍
Рет қаралды 69,447
Күн бұрынEdit, this video applies to Profile® Folding Racks sold before 9/1/23 We have since updated the wall bracket and upright designs. Please refer to this video for updated install - • How To Install your NE...
Ready to install your new PRx Performance folding rack?! We'll teach you what tools you'll need and how to install your rack.
Take your time, follow the directions carefully, have a friend over to help, and enjoy the gainz when you're finished. Hit that SUBSCRIBE button to follow along as we continue to add more content!
Want to take your home gym to the next level? Find more accessories and equipment here! prxperformance.com
@sarabear1238 10 ай бұрын
I'm surprised with some of the negative reviews. I was so impressed with the kzfaq.infoUgkxMwYg0MOXR4M-oGeyBsNSYe1aPOUoRH6D cage that I got the lat pulldown attachment that goes with it. It is equally outstanding. I don't have one complaint other than putting it together is a job. The instructions and packaging of the parts are very well designed and organized. Also, I stripped and damaged the pull down cable the first day, admitting it was my stupid fault, and they quickly replaced it at no charge. I'm 6'5, 280lbs and fit in the cage just fine. Glenn B
@prxperformance 10 ай бұрын
Yes, you sure can! prxperformance.com/products/3x3-dip-station-attachment?variant=33017806094420
@tylerklein9828 3 жыл бұрын
Solid work, team!
@Reyyjayy123 3 жыл бұрын
One of the best things I have ever purchased. I have zero regrets. cost a pretty penny but the pro blue looks so good.
@prxperformance 3 жыл бұрын
Great to hear it and we're happy to have you in the PRx family!
@prxperformance 3 жыл бұрын
Was this video helpful for you? Let us know below!
@mmchesnick07 3 жыл бұрын
Ours is being delivered tomorrow we plan on drilling into a concrete wall. Is that ok?
@prxperformance 3 жыл бұрын
@@mmchesnick07 It is OK! We've had plenty of customers install into concrete. You will need to pick up your own hardware as we only supply hardware to mount to wooden studs. We recommend wedge or shield anchors, as well as tapcon screws! Reach out to us via our website if you have any more questions 👍 prxperformance.com/pages/contact-us
@mmchesnick07 3 жыл бұрын
@@prxperformance Thank you!
@b16crxt Жыл бұрын
My garage wall has a stud box to close the gap in the wall height to the next room which makes my 16” stud spacing fall apart. It doesn’t even have 24” stud spacing. Can I go higher than 19” for the bottom bracket as long as I maintain the spacing from the top bracket? I need to go up 30” from the garage floor. In my head it would just make the rack slightly closer to the wall when it’s in the down position.
@prxperformance Жыл бұрын
@@b16crxt contact our team here and we can work to find a solution! prxperformance.com/pages/contact-us
@fwvanoorschot6507 Жыл бұрын
How do you do meadows row?
@jamierichardson3906 2 жыл бұрын
The instruction manual and this video attach the kipping bar differently. Should the kipping bars be parallel with each other or angled?
@prxperformance 2 жыл бұрын
Since this video, our Kipping Bar was redesigned. The 2 bars should be parallel! Contact us here if you need further help! prxperformance.com/pages/contact-us
@devadroid5269 Жыл бұрын
@@prxperformance What’s the advantage of the redesign? The different heights seems useful for my wife to reach. Was the older/angled design less stable or did it interfere with certain movements? 3:56
@djonederisrael5792 2 жыл бұрын
What size and type of screws are used for the top and bottom brackets, to screw into the wall?
@prxperformance 2 жыл бұрын
We provide lag bolts to install into the wooden studs! Contact our team here if you have further questions regarding install or hardware 👍 prxperformance.com/pages/contact-us
@gabe37 7 ай бұрын
What size are the screws for the brackets into the wall? I’m looking to install it into a concrete wall and wondering if I need to make any adjustments in the install. Thanks
@prxperformance 7 ай бұрын
You'll need to select your own hardware for a concrete or brick install. We only include hardware to install into wooden studs. We recommend working with someone at a hardware store to determine what hardware will be best for your wall. Tapcons, wedge anchors or shield anchors do work best.
@derrienbraxton5089 Жыл бұрын
The right upright is just a hair off the ground when deployed. As by suggestion?
@prxperformance Жыл бұрын
Check the levelness of the wall brackets and double check all wall bracket measurements...it could also be that the shocks just need a little time to settle. Feel free to send photos to our team here! prxperformance.com/pages/contact-us
@jon4097 3 жыл бұрын
What determines the 9' (108") recommended height for the 90" rack? Is that for head / torso clearance for kipping pullups / Bar muscle ups? My garage is 103" floor to ceiling, so it would be just a bit short. I'm 5'10", and Bar MU isn't necessary but I would like to be able to practice butterfly or kipping pullups.
@prxperformance 3 жыл бұрын
9' is the height needed to fold up a 90" rack! If it's a shorter space, we can make things work. Folded out, you'd be at 90" and have 28" above the bar (23" for your 103" ceiling). You'll totally be able to do butterfly and kipping pull ups. I am 6ft and performed those movements in our Pull Up Bar Video. Also, for the 103" space, a 90" rack will work just fine! Follow page 12 in the instruction manual for your specific install solution 👍
@jon4097 3 жыл бұрын
@@prxperformance Makes sense! Thank you for the detailed reply.
@dragonsofthunder Жыл бұрын
@@jon4097 some guy here on KZfaq just barely moved the top rack. I just watched his video
@randyrodriguez9865 Жыл бұрын
Great to know my garage measurements are same 103” from floor to ceiling .
@BlaqMob 2 жыл бұрын
PRX, i have cinder block garage walls what do you recommend ?
@prxperformance 2 жыл бұрын
Contact our team here! We recommend wedge or shield anchors or else tap con screws. prxperformance.com/pages/contact-us
@johnrimorin7266 2 жыл бұрын
If I’m installing a 3/4 inch gym mat do I need to account for that when measuring the 19” distance from the floor?
@prxperformance 2 жыл бұрын
Just install without the flooring and measure as you would. Once you're finished, slide the rubber flooring underneath 👍
@Spaghetti02 2 жыл бұрын
Do I have to do the opposite of this to uninstall and move to a different wall? Or can I just unscrew from wall and out on another wall?
@jerrybolen4331 2 жыл бұрын
so if you mount your bottom bracket at 19.5 inches is that a big deal due to knee wall issues? thank you
@prxperformance 2 жыл бұрын
Mount at the specific measurements - if you need assistance, contact us here! prxperformance.com/pages/contact-us
@alexandernegrette Жыл бұрын
According to the PRX manual, the recommended spacing between spaces is 75 inches. I couldn't find any mention of 69 inches in the manual. Additionally, for a 19-inch bottom bracket, the top bracket should measure 94 inches.
@prxperformance Жыл бұрын
Are you installing a 96" rack? The measurements are different for 90 and 96 inch racks!
@JayeL-bu9bt Жыл бұрын
@@prxperformance would've been a really good thing to mention
@archon810 10 ай бұрын
@@JayeL-bu9bt The very first thing he says in the video is "how to install a 90" PRO rack."
@darenking1508 11 ай бұрын
Does this install apply to a 90 inch PRX Pro Rack? My ceiling is 115 inches in the garage. I was told I could purchase the 90 or 96 inch rack - I am under 6ft so figured I will get the 90 inch rack. Just want to make sure this is the correct video to use when I get it and put it up. Thanks
@prxperformance 11 ай бұрын
Yes, but you may notice your wall brackets are a little different. We just made the change so follow your paper instructions (a couple new measurements) and you’ll be good to go! With the video, we did install a 90” rack
@darenking1508 11 ай бұрын
@@prxperformance thank you just purchased PRX PRO Rack 90’
@jameswalsh8571 2 жыл бұрын
Just bought mine. My wall I’m mounting it on is cement. What do you recommend me drill with?
@prxperformance 2 жыл бұрын
We do recommend a professional install, but we do know plenty of customers install into concrete. I would connect with a hardware specialist at a hardware or home store. They will be able to help you select the correct hardware needed!
@LANDSHARKK 2 жыл бұрын
Tapcons. 3" X 5/16" with washers will do the trick
@Ralks86 2 жыл бұрын
What is the 32” on either side of the rack for? Mounting the wall stands for bars, etc?
@prxperformance 2 жыл бұрын
So that you have enough room to move around, load and unload plates when the bar is racked!
@futbol1972 2 жыл бұрын
Should I do rack pulls on my prx rack with the spotter arms or will this be bad for the bolts on wall?? I don't want them to get loose over time. I have two buldging disk so I wanna start doing rack pulls instead of deadlifts. There is someone who wants to buy it and will sell it if I can't do rack pulls on it to get rep fitness rack
@prxperformance 2 жыл бұрын
You can do your rack pulls with our rack!
@futbol1972 2 жыл бұрын
@@prxperformance thank u.
@jamesadamson4470 Жыл бұрын
As Alex states at the start, this video is for the REGULAR 90inch rack. If you use these measurements for the 96 inch rack, it wont work at the end and attach properly. You will have to go back to square one. Or so I’ve been told 😂
@prxperformance Жыл бұрын
Yes, the measurements are different for 96" racks!
@sevengone Жыл бұрын
Is the 19” and 88” based off the top, middle, or bottom of the brackets?
@prxperformance Жыл бұрын
You’ll want your bolt to go through at 19” and 88” 👍
@sevengone Жыл бұрын
@@prxperformance thanks for clarifying
@ayodangit 2 жыл бұрын
69" between the 2 brackets--- between the center of the 2 brackets? or from the bottom of the top and top of the bottom (space in between should be 69")?
@prxperformance 2 жыл бұрын
Top to top, middle to middle or bottom to bottom 👍
@Nick19837 Жыл бұрын
I'm confused - if you start with the "lower side" when installing the bracket and measure up 19 inches, won't that make it impossible to level the higher side if it is also measured up 19 inches? Shouldn't it start with the higher side and then add a rubber leveling foot to the lower side of the rack?
@prxperformance Жыл бұрын
You can add the leveling kit or shim your rack after the install! If you're having install issues, please contact our sales and support team here! prxperformance.com/pages/contact-us
@sfpg1 2 жыл бұрын
Is there an issue if the lower part of the wall is concrete And upper is drywall?
@prxperformance 2 жыл бұрын
Nope, we've seen plenty of customers install in this situation! Just make sure if the concrete sticks out further that you account for that behind the top wall bracket. Basically build out so that both are flush 👍
@sfpg1 2 жыл бұрын
@@prxperformance thank, that's was exactly what I was looking for
@adamdurham16 3 жыл бұрын
What happens it your floor is uneven one leg is higher than the other
@prxperformance 3 жыл бұрын
Great question! For these situations we have our Leveling Kit! Simple solution, but it works. prxperformance.com/products/leveling-kit?_pos=1&_psq=leveling&_ss=e&_v=1.0
@adamdurham16 3 жыл бұрын
Awesome thank you
@Johnny-adamser Жыл бұрын
Just Installed mine. Doesn’t unfold as smoot as I wished. Any tips?
@prxperformance Жыл бұрын
Could you send a video here? I'd recommend checking out the pivot points and possibly loosening those nuts 1/4 turn. prxperformance.com/pages/contact-us
@prxperformance Жыл бұрын
Watch this video! kzfaq.info/get/bejne/bbaWfKeGspjYpnU.html
@deploymentbetancur2559 3 жыл бұрын
what if my wall studs don’t match up with the holes?
@prxperformance 3 жыл бұрын
Great question! If that is the situation, we recommend attaching a 2x6 or 2x8 stringer board that spans across 4 studs. From there, you can install your wall brackets to the stringer boards 👍
@archon810 10 ай бұрын
@@prxperformance Do you sell the stringers too? Stringers are an option at order time with Rogue, but I don't see it with PRx.
@prxperformance 10 ай бұрын
@@archon810 at this time, we do not offer stringers.
@zuus1234 11 ай бұрын
What if your ceiling is not under 9ft?
@prxperformance 11 ай бұрын
Than you follow the modified install instructions on page 2 for your exact ceiling height 👍
@dubumang Жыл бұрын
What if I have 24 inchew btw studs
@prxperformance Жыл бұрын
You can still install! We have holes in the wall brackets for studs that are spaced 24” or you can install stringer boards across your studs and install into the stringer boards 👍
@dewafelbakkers Жыл бұрын
Why does the measurement between the two wall brackets have to be that specific? It doesn't matter exactly where the brackets are as long as the linkage arms for the top and the bottom are mounted parallel to each other and fold at the same angle.
@prxperformance Жыл бұрын
The measurements between brackets will keep them in spec so that they fold at the same angle. Just being slightly off will dramatically effect the path of the rack and it won't fold correctly. There are some modifications that can be done but yes it's important for folding.
@dewafelbakkers Жыл бұрын
@@prxperformance the angle, the -angle- is important for folding. You can mount the lower and upper brackets wherever as long as the upper and lower bracket linkages attach to the uprights at the same angle.
@prxperformance Жыл бұрын
@@dewafelbakkers all proper measurements are provided in the instructions. We cannot guarantee that the rack will fold properly if those measurements aren’t followed. Thanks!
@Mafioso1731 2 жыл бұрын
Where is the how to install video for low ceilings? I have an 86inch ceiling and I was told I can still install a 73Inch Prx PRO. Is there a video?
@prxperformance 2 жыл бұрын
The install is essentially the same, follow your instructions and use the proper measurements on page 2 for your 86" ceiling. cdn.shopify.com/s/files/1/0997/2134/files/PRO_Squat_Temp_Master_Rack_Install_Instructions_f6d72205-6d55-4769-b8eb-83fd191a864e.pdf?v=1640707277
@Mafioso1731 2 жыл бұрын
@@prxperformance Thank you!
@sixsgma1563 2 жыл бұрын
Has anyone tried installing this with thrust bearings after the plastic bushing? It should make the motion buttery smooth
@prxperformance 2 жыл бұрын
Not that we know of. We provide all of the hardware needed for install and proper operation!
@SiDPT15 5 ай бұрын
Why do you need 32 inches on either side of the rack?
@prxperformance 4 ай бұрын
For the barbell clearance!
@frugalfreddy81 2 жыл бұрын
I'm struggling with new install. Everything is put together but it's very hard to pull from wall and rack. As if the shocks aren't working. Instructions state to adjust pivot arms. Your video is misleading because after I adjusted the pivot points, the washers are freely spinning. Is that what I should see? My pivot arms don't freely move up/down as shown on your video
@prxperformance 2 жыл бұрын
Contact our team here and please send a video of what is going on with your rack and our team will assist you! prxperformance.com/pages/contact-us
@Mafioso1731 2 жыл бұрын
Also i was told that these eventually weigh on your studs and cause damage? Not immediately but over time? Has anyone experience or noticed their screws sinking down on the stud over time?
@prxperformance 2 жыл бұрын
When deployed, the weight of the rack and equipment is dispersed through the floor. Outside of that, it's the same as hanging anything else on your walls. You'll be fine! Remember, those same walls are supporting your house 👍
@Daralantan Жыл бұрын
"The most important is the 69" between the upper and lower rack" ---- Is it ok if the bottom one is mounted slightly higher and they still have 69" between them?
@prxperformance Жыл бұрын
The brackets cannot go up! Contact our team here if you need help fitting a rack into a certain space! We definitely have ways we can help 👍 prxperformance.com/pages/contact-us
@JulianSwishers Жыл бұрын
What if my space is only 96 inches tall? What then?
@prxperformance Жыл бұрын
You can still install a 90" rack. In the instructions there are special measurements for shorter spaces. Use the correct measurements for a 96" space and you'll be good to go!
@fball214life 2 жыл бұрын
Just got mine today…..HOLY CRAP…DO NOT PUT THIS TOGETHER BY YOURSELF!!! MUCH EAISER WITH A PARTNER TO HOLD THINGS FOR YA🤣🤣🤣
@prxperformance 2 жыл бұрын
We definitely recommend having a friend around to help!!
@JayeL-bu9bt Жыл бұрын
Purchase specific instructions sent via email would be great... searching multiple boxes for the instructions or youtube for the correct instructions is a bad look after i just spent $3k on a unit
@prxperformance Жыл бұрын
What instructions are you referring to? If you're talking about a rack, they are in with the j-cups and hardware! If something didn't appear to be included, please contact us here so we can help! prxperformance.com/pages/contact-us
@TheBeaugarson 2 жыл бұрын
How would I get in touch with a professional installer? I can’t find the stud .
@prxperformance 2 жыл бұрын
Check out the group we have posted about 3/4 of the way down this page! prxperformance.com/pages/support
@dragonsofthunder Жыл бұрын
What did they charge you?
Mastering Mayhem
Рет қаралды 31 М.
Garage Gym Reviews
Рет қаралды 106 М.
Ăn Vặt Tuổi Thơ 2024
Рет қаралды 31 МЛН