How to keep glasses from sliding down your nose

Рет қаралды 128,656

4 жыл бұрын

Tips on how to keep your glasses from sliding down your nose.
Dr. Jones from Advanced Family Eyecare in Spanish Fork, Utah shares some tips on how to prevent your glasses from slipping.
0:48 1. Nerd Wax! You can find this on Amazon. Put a bit on the bridge of the glasses and it really helps.
1:10 2. Shrink Tubing! You can find this at Harbor Freight for $1.50. Slip some on the temples. Use a blow dryer to shrink it down. Get it to 150 degrees. This really helps keep your glasses from slipping.
1:50 3. Let us adjust them. We can adjust the back temple to stop the sliding.
Subscribe to our channel and visit www.eyecarespanishfork.com today.
Thanks!

Пікірлер: 60

@thedrunkmonkey2254 2 жыл бұрын

Short sweet to the point with good information excellent video.

@maxluna25 3 жыл бұрын

If the back of the frame is plastic or the nose part is plastic it has a high chance of sliding down from face oils and sweat What I do is uses double sided foam pads on the side of my glasses to prevent it from slipping Alternatively you can sand the nose parts a little bit to remove the smooth layer and it can grip your nose well Finally you can manually screw the screw that's on the hinges overtime these screws come loose and a simple tightening can help

@UV0023 2 жыл бұрын

thanks for making the video short and to the point

@johnsink856 2 жыл бұрын

Thanks for the help greatly appreciated

@vacancykasteelproperty9594 4 жыл бұрын

Great. Thanks. I’ll have to remember that.

@advancedfamilyeyecare9430 4 жыл бұрын

Thanks for the comment.

@AGemFromJax 3 жыл бұрын

This was helpful!

@advancedfamilyeyecare9430 3 жыл бұрын

Thank you!

@KindraAdair 4 жыл бұрын

I am so excited to try the wax! I have a pair of sunglasses that are always sliding and drive me crazy so thank you for this tip!

@advancedfamilyeyecare9430 4 жыл бұрын

Great! Let us know how it goes. Thanks for subscribing too!

@VID801 4 жыл бұрын

I have the same problem with sunglasses. I'll let you know how it goes. 😎

@advancedfamilyeyecare9430 4 жыл бұрын

@@VID801 Works great for sunglasses as well.

@robynhanlon6003 3 жыл бұрын

@@VID801 the company

@moodsett3 2 ай бұрын

ooh thank you very much‼️‼️ and you’re just across the bayway from me‼️

@SEVIMCRUZ 2 жыл бұрын

Thanks!

@kanekoa88 29 күн бұрын

Used the suction tubing from the dentist, cut to size but pulled out metal wire. Great fit and comfortable. Can't even feel its there.

@steviemurray6617 Жыл бұрын

Some of us just sweat alot 😀 Sometimes I also I have to stop wearing them for a while because there's sensory overload on my face and having something touch it gets too overwhelming.

@Marko-vp1qq 3 жыл бұрын

Very helpfull this one !

@VID801 3 жыл бұрын

Agreed!

@robyna446 3 жыл бұрын

Thank you!!!

@advancedfamilyeyecare9430 3 жыл бұрын

Thanks for the comment.

@robertbrooks5696 3 жыл бұрын

Right there where your arm connects to your glasses I made mistake and set on them while he was folded up and they kind of bent right there in the screw came out and I'm trying to line them back up but I can't line them back up because of some fact that hold that the screw slides to the glasses on the arm that spring in it won't release enough where I can line the screw up

@jamieclark4681 Жыл бұрын

I have a question I don't know if the doctor can answer this because the videos a couple years old but for the shrink tubes I see that some of them have adhesive inside of them and are they still going to be easy to be removed off without damaging the arms of the glasses and would the adhesive in the shrink tubes be easy to be removed?

@adamthompson7170 27 күн бұрын

I just started using breath right nasal strips to stop mine from slipping off!

@leonardusthijssen9613 3 жыл бұрын

My classes had so much scratches after 1 year. I am 64 and had glasses my whole life never happened before

@bertiepimplebum5633 3 жыл бұрын

I'll remember this.

@advancedfamilyeyecare9430 3 жыл бұрын

Glad it was helpful. Thanks for the comment.

@lisperez5079 3 жыл бұрын

I got my new pair of eye glasses yesterday and it didn't slide till 5 hours later all the way to my tips of my nose oh i hate it i;m going to buy that wax thanks for your recommendation, by the way what's the name of the wax?

@tgrjds Жыл бұрын

Nerd wax

@Hugginsince79 2 жыл бұрын

I bet this breaks me out. I’m a new glasses wearer and my nose gets bumps already 🤦🏽‍♀️

@aesinam 2 жыл бұрын

You can get specially made silicone tubes (made for glasses) for the arms (like he showed with the shrink tubing). Works great and no break outs

@BrandySimonton 3 жыл бұрын

Shouldn’t the eye care place adjust it properly so we don’t have to use those products

@realhumanbean46 3 жыл бұрын

Glasses are a manufacture product not eyeballs.

@ifyoutubedeletes1morevideo880 2 жыл бұрын

Ehh.. Adjustments aren't always permanent. They're just adjustments. My glasses were fit to me the most perfectly I've ever had a new pair done at my new eye place about this time last year. ( For reference I've been blind asf since about the 5th grade) Now theyre loosened up quite a lot. Shit happens.

@paulweston8184 2 жыл бұрын

Exactly. Name one eye care place that doesn't adjust the glasses you purchase from them. That is an optician's job. Either this Dr doesn't have trained optician's fitting people with eyewear or he just doesn't talk to them. I'm kinda shocked that he would even recommend heatshrink tubing. Who wants to put heatshrink tubing on a pair of designer glasses.

@paulweston8184 2 жыл бұрын

@@ifyoutubedeletes1morevideo880 That's when you go back and get them readjusted. Maybe you're so used to just dealing with it like when you were in the fifth grade, that nobody told you to just go back and get them readjusted. lol. Ehh. Seriously?

@paulweston8184 2 жыл бұрын

@@realhumanbean46 Yes, glasses can be adjusted to fit. You can also get Lasik corrective surgery. I'm sorry. What was your point?

@MrMac-0 3 жыл бұрын

I just crazy glue the temples and I can sleep with mine on

@glennporter6378 2 жыл бұрын

Another thing that works great for me is what NOT to do. You really don't want to fold your glasses. I just lay them down unfolded. When you fold your glasses it weakens the firmness

@elisereid5101 5 ай бұрын

That's actually a really good point 👍🏻

@AdrianaCalloway-ix4sn 12 күн бұрын

Nerd wax????? What is that made of?

@ajnaamlungfuwa40 3 жыл бұрын

see other videosfor this concern ,,,they are much better and practical

@dirkbals2836 2 жыл бұрын

I let the optometrist put softpads on my carrera frame.it helps a lot against sliding.

@aure4330 2 жыл бұрын

I just got my new glasses and it’ keeps sliding down during class 😭

@kwempy90 3 ай бұрын

shout out to all my forkers in the chat

@ahmedagaga5835 6 ай бұрын

I am an Egyptian optical technician. I can maintain all glasses and of course install them. I can even use a vision detector. I want to travel for work. Is there anyone who can help me?

@wheretonext7577 Ай бұрын

Thank you! I went to the nerd wax site but there was no video so didn’t buy it. Thanks!

@ionutfelicitari9328 Ай бұрын

Dont do the heat tubing , i got a pretty bad looking scar that says it

@Michel-vt2ft 3 жыл бұрын

Most pads are made out of PVC, a harder and smooth material. Switching those to silicone pads often gives you a better hold due to the silicone being more sticky. One thing you should keep in mind is that due to silicone being softer sweat and cosmetica get to the padarm quicker to form verdigris.

@kyledavis635 Жыл бұрын

Or.... you could just get a new wife.... 🤣

@melissacooper4282 2 жыл бұрын

I mainly had them adjusted so it wouldn't slide down my nose so bad. I was more worried that they would fall off my face when I have to bend down to pick up something. I mainly noticed them sliding down a little bit if my face gets oily.

@souvikchakraborty9142 2 жыл бұрын

Not really,can you give some fitting hacks to hold the specs.

@la196 2 жыл бұрын

I wear readers at work (Dental field). If and when my glasses begin sliding down my nose, I take a very small loop of a thin rubber band. Double it up, sometimes triple it, slide it onto each arm of your glasses and work it along the arm up to and into the hinged area of your glasses up by the frame. (Ortho bands work great). When you open up the arms, the arms don't quite open up as far as the rubber band acts as a stop. Which has some "give" due to it being rubber, so it's not a rigid stop to cause any damage to the glasses. So the result is a slightly tighter fit of the arms toward the sides of your head. For me...problem solved! :) The key is a very small thin rubber band on each side in the hinged area of the arms. Works perfect.