BEST most concise, easy to follow instructions I've EVER seen on a Silhouette tutorial! Thank you!
@ColorChangeCustoms Жыл бұрын
Thank you for the kind words 🙏 and thanks for watching!!
@yemarican Жыл бұрын
This by far is the most professionally informative and sufficient tutorial .. literally all I needed to know for what I'm trying to do. Thank you for taking the time to share this with us. I appreciate it.
@ColorChangeCustoms Жыл бұрын
Thank you, and thanks for watching. I’m glad this was helpful!
@tuishmah75592 ай бұрын
Wonderful video! It’s exactly what I needed to make a large decal with my cameo 4!! Thank you!
@ColorChangeCustoms2 ай бұрын
Thanks and thanks for watching!
@sheepishlysharing11 ай бұрын
So many helpful tips! You've covered all potential pitfalls several of which wouldn't have occurred to me! Thank you!
@ColorChangeCustoms11 ай бұрын
Thanks for the kind words, and thanks for watching!
@janeantonettegenato26575 ай бұрын
The best and most detailed tutorial. Thank you so much
@ColorChangeCustoms5 ай бұрын
Thanks and thanks for watching!
@rogerdutton694 ай бұрын
Thank you so much your very clear and detailed on your instructions
@ColorChangeCustoms4 ай бұрын
Thank you for watching!
@JevoUK Жыл бұрын
When weeding out lettering its best to go from right to left. LETTERING⬅️
@charleasor42258 ай бұрын
Thank you so much!!! So many great tips and super easy to follow!!!!!
@ColorChangeCustoms8 ай бұрын
Thanks, and thanks for watching! I'm glad the video was helpful.
@yolandagarcia1856 ай бұрын
Thank you I learned so much, you camera and your speed to explain and clarity as well made it made it easy to follow you.
@ColorChangeCustoms6 ай бұрын
Thank you for the kind words and thanks for watching!
@evelynagbasonu30962 жыл бұрын
Straight forward and concise tutorial. Thanks for the step by step presentation.
@ColorChangeCustoms2 жыл бұрын
Thanks and thank you for watching!
@newnarratives11 ай бұрын
This was very informative, thank you
@ColorChangeCustoms11 ай бұрын
Thank you and thanks for watching!
@The_AlexK_Project2 ай бұрын
Great tutorial - Thank you!
@ColorChangeCustoms2 ай бұрын
You're very welcome! Thanks for watching!
@lisasnow33462 жыл бұрын
You make it look so easy….thank you for great, understandable instructions!!
@ColorChangeCustoms2 жыл бұрын
Thank you, and thank you for watching!
@hauntCS Жыл бұрын
exactly what i was looking for brother
@ColorChangeCustoms Жыл бұрын
Thanks and thanks for watching. Glad the video was helpful!
@rebeccaarroyo4705 Жыл бұрын
What a great job! Thanks for sharing!
@ColorChangeCustoms Жыл бұрын
Thank you and thank you for watching!
@thegreencord2985 Жыл бұрын
Excellent video. Love the way you explain it so clearly. No hesitation to subscribe 😊
@ColorChangeCustoms Жыл бұрын
Thank you and thank you for watching!
@willembuitendyk32192 жыл бұрын
Thanks so much. Very detailed process and very helpful.
@ColorChangeCustoms2 жыл бұрын
Thank you and thanks for watching!
@truongcan892 жыл бұрын
Great video! Can you do a tutorial on how to line up oversize decals that are split into multiple pieces?
@ColorChangeCustoms2 жыл бұрын
Sure! I can work on one to post in the future, as that's one that could be helpful. Thanks for the suggestion and thanks for watching!
@ColorChangeCustoms2 жыл бұрын
I do have another video already made that may be helpful. Slightly different, but the concepts within can be applied to line up multi-piece large decals. kzfaq.info/get/bejne/j9JyqqyJ26zZfH0.html
@rritchie44492 жыл бұрын
Wonderful and informative video!
@ColorChangeCustoms2 жыл бұрын
Thanks, and thanks for watching!
@The_Legend_of_Gaming522 жыл бұрын
Nice work
@albertsmit9741 Жыл бұрын
good vid again
@ColorChangeCustoms Жыл бұрын
Thanks, and thanks for watching!
@kimcockerham4039 ай бұрын
how would you make a large rainbow temporary wall decal
@ColorChangeCustoms9 ай бұрын
Depending on the arc of the rainbow, you'd have to do it in multiple sections lengthwise as well as for each color.
@kelseyhubbard5342 ай бұрын
Only the first few letters of my design are showing up red to actually cut. How do I fix this?
@ColorChangeCustoms2 ай бұрын
It sounds like maybe your layout might not be sized correctly? Without seeing what you are, I don't know for sure. But around 2:30 in the video, I show how to adjust the layout of the "cutting" area by setting it to a custom size bigger than the graphic. In the page setup menu, ensure cutting mat is set to none. Then below that on the width and height custom sizes, adjust the length (or height, depending on how you are orienting your graphic) according so that it's bigger than the actual graphic you designed. Hopefully this helps.
@skywatcher1973Ай бұрын
Mine won't go past 120in & I need 132in. I have a cameo 4 pro How can I get it to change?
@ColorChangeCustomsАй бұрын
My best guess it's that you might need to make adjustments on the custom media size settings. If that still doesn't work, you could cut your graphing in sections. Meaning, if you were cutting out the same graphics in this video, maybe cut out "So that one may" and then cut out "walk in peace" after, and then just apply it in sections as demonstrated in the video.
@lancomedic Жыл бұрын
Great explanation. When using the built-in roller(Cameo4) what makes the vinyl re-roll when moving backwards? I also like how you put the entire thing up first to line it up by eye since floor to ceiling heights vary over distance in commercial buildings.
@ColorChangeCustoms Жыл бұрын
Thanks and thanks for watching! For your question, as I don't have a Cameo 4 (I have the 3) I'm not familiar with that model's built in roller. However, for the attachment I have, when the roll is moving back, the roll hold is loose enough that it just re-rolls. Or, if I have the vinyl loose, meaning the length of vinyl not in the Cameo is drooping over the side down to the floor, it's been the same experience. I might recommend if you are going to do a long length, "roll through" the roll you intend to use (to check and make sure somewhere down the line it won't misalign) and when you roll it back, see what it does. That way you'll know for sure.
@lancomedic Жыл бұрын
@@ColorChangeCustoms Thanks, I will do that.
@amritakaur14972 жыл бұрын
I tried cutting but when it cuts the letters are over cutting on each other.
@ColorChangeCustoms2 жыл бұрын
Assuming you are using Silhouette Studio, if you have letters that touch, be sure to use the weld function first. Otherwise, your Cameo will cut where the letters that touch overlap.
@TEAMNENA2 жыл бұрын
Love the video but bruuh gotta work on the extra rambling 🥴
@ColorChangeCustoms2 жыл бұрын
Thanks for watching and for the feedback. Yeah, I do need to work on that. Are there specific sections (time stamps helpful) in particular so I can see/hear what I'm doing to then improve/reduce rambling?
@rebeccaarroyo4705 Жыл бұрын
Always has to be someone to be negative! I feel like he didn’t ramble at all. He actually did his job and was extremely detailed and thorough. Probably will save me so much time and money.
@schumaker2212 жыл бұрын
Thanks for sharing your knowledge. Was helpful for me
@ColorChangeCustoms2 жыл бұрын
Thanks and thanks for watching! Glad it was helpful.