How to Make Your BMX Bike Faster

Рет қаралды 15,656

Жыл бұрын

In this video I grab a 2016 Haro BMX Bike and we make it a bit faster!
If you have big Sprockets*
If you're riding a bigger freewheel hub at the rear changing the rear freewheel for a smaller one (eg 16t to 14t ) will have the same effect.
Thanks for watching
Social links
Facebook - / thegibbsguy
Facebook cars - / streetviewspottingnz
Twitter - / the_gibbs_guy
Instagram - / the_gibbs_guy_yt
Note: This video is purely based on my experience with riding bikes, 50% of the time the front or rear sprocket is swapped out to suit my riding, this is best suited for flat road and long distance rather than park or dirt.
chur

Пікірлер: 25

@yterrxrize 7 ай бұрын

I know this video is a bit old, when you pay attention right after the install , your speed increased and you were still pushing it. I know you noticed when you first jumped on. Thumbs up

@meh11235 6 ай бұрын

excellent, informative and gnarly

@coachprof5666 2 ай бұрын

Gears I’ve run… 44/16 180mm cranks 45/16 “” 46/16 “” 44/16 175mm 45/16 177.5mm 43/15 and back on 180mm 46/16 w 180mm was good for novice class but too slow for int so I started experimenting. I’m presently running 43/15 w 180mm - 43 helps me get out of the gate a little better and 15 helps me get a better top end. I’m not a flaming hot spinner so this combo seems to work well for my powerband. I do better with a longer slower stroke. Rollout is several inches better. If I get any stronger I’ll move back up to 44 on front keep at 15 rear and 180mm

@user-lx5cm5lc8k 3 ай бұрын

Good work.

@Salade_Verte 10 ай бұрын

Very helpful 👍

@nafybontilao2563 Жыл бұрын

Nice bike

@AaroMesa Жыл бұрын

Cheers! I keep me eyes on local buy sell pages as they tend to have very cheap bikes and good deals sometimes.

@edgarmarvin8776 2 ай бұрын

I'm assuming the rear sprocket is 16 teeth I'm old school and honestly don't recall how many teeth we had on the crank sprocket but it was twice the size of what I see on bikes these days

@x88868 6 ай бұрын

Now that you measured from 25 to 28. Try 28 to 30/31/32.

@adampierce7468 4 ай бұрын

I do like the 25/9 gear ratio but I find 44/16 is speedier and less stiff.

@kmbvinyl 11 ай бұрын

So I just got a bmx been awhile I plan on mainly hitting like paved trails and just messing around in town riding ( not all flat and speed ) would you recommend a smaller front sprocket ? Or swap the front and the rear cog ?

@x88868 6 ай бұрын

30/9 would be ideal.

@AaroMesa 6 ай бұрын

I'd go 30 to 9 Have the same on my every day rider for terrain which is mainly flat

@x88868 6 ай бұрын

@@AaroMesa I'm currently riding 31/9. I'm thinking about dropping down to 30/9. Seems to be the best ideal gear for a BMX. Not so much struggle for a single speed yet fast enough to actually get around. I also think crank length matters. I'm running 175mm.

@jeremybaker5444 4 ай бұрын

28/9 is a nice ratio. My 30/9 is a bit harder to pedal

@Altimis 3 ай бұрын

I don't know BMX but in Fixed or Track or other. Bigger chain ring is a trend. You have more power and faster despite you trade it off with cadence a bit slower. You also able to keep top end speed better as well. The spinning like crazy to top out speed is old school now. By the way, still depends on where you lives. If you lives where hilly area. Stick with common sense and your strength.

@AaroMesa 3 ай бұрын

Yeah man I did mention if you live near hills to stick with a lower gearing :D

@teammcNOCTIS 9 ай бұрын

my new bmx is 44t chainring 16t rear sprocket its very hard to pedal? what size do i need to make my bmx smooth to pedal

@AaroMesa 6 ай бұрын

That would be the norm for your bike, there could be a problem with the bearings in the hubs if it shows resistance

@doraiscomingtokillyou3526 4 ай бұрын

Put 32t chainring instead of 44t

@themasterfan14 Жыл бұрын

I wish I can do this but I doubt I have the equipment nor the skill

@AaroMesa 6 ай бұрын

If you're dedicated to bike building I'd hit up KZfaq for most infomation I'm sure a local bike shop would do the job at a reasonable price Been doing it for awhile myself and had to learn heaaaps but it's a helpful skill to have