How to Measure & Install Concealed Hinges on Cabinet Doors

Рет қаралды 2,204,312

Күн бұрын

This video tells you EVERYTHING YOU NEED TO KNOW about installing Concealed Hinges (European style) on cabinet doors.
You can buy me a coffee here www.buymeacoffee.com/charlied... or become a monthly member to unlock Discord forum membership, exclusive content and automatic entry into my FREE Monthly Giveaway. Thank you SO SO much!!
0:00 Start
0:05 Intro
0:36 Why Use Concealed Hinges?
3:35 What Hinges to Buy & How to Position them
12:16 The Jig
13:08 The Mock Up
17:00 Adjusting the Hinges
18:50 Hinge Installation
19:12 Hanging the Doors
You can now access my 🛠Charlie DIYte Amazon Tool Store here www.amazon.co.uk/shop/charlie... - where you'll find all my tried, tested and much loved DIY tools arranged into handy categories.
Take a deep breath everyone, it's a bit of a long video, but I wanted to make it as comprehensive a run through as possible of what is quite a tricky process that home owners typically don't take on.
There is quite a lot to take on board, but once you've watched this hopefully you'll realise that installing concealed hinges is actually really straight forward.
Latest Blum catalogue bit.ly/3xfZLHO
In Today's Toolkit:
- Blum Clip On 95 degree thick door cabinet hinges with integrated soft close goo.gl/q7Gv8j £9.20/ $12.04*
- Blum mounting plate. 0mm spacing. zinc die cast bit.ly/2tblItn £2.70/ $3.34*
- Ryobi Electric Drill
- Ryobi Electric Screwdriver/ manual screwsdriver
- Hinge Boring Bit 35mm bit.ly/2YFuGL5 £13.08/ $16.20*
- 12" Combination square geni.us/uR25dU9 (Amazon)
- Bradawl geni.us/Mn1pLJ (Amazon)
*typical prices taken off the internet 9/04/2017
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here:
/ charliediyte
LET'S CONNECT!
Charlie DIYte
-- Email: charliediyte@gmail.com
-- / charliediyte
-- charliediyte.co.uk/
-- / charliediyte
-- / charliediyte

Пікірлер: 853

@CharlieDIYte 4 жыл бұрын

🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. Help support me on Patreon -www.patreon.com/charlieDIYte (includes Discord access).

@brianheney8063 4 жыл бұрын

Brilliant work Charlie the most thoughtful I've seen. Thank you for your insights.

@cwhyte153 4 жыл бұрын

I stopped watching after 30 secs...FFWD video to 10 mns , and the hinge was still not yet installed. I CAN'T understand why people talk so much! Why can't they simply get to the point!

@abdullapppdadshah9497 2 жыл бұрын

@@cwhyte153 0

@CharlieDIYte 2 жыл бұрын

@@cwhyte153 You'd understand why if you watched the video. 😉

@scrumpadelic Жыл бұрын

@@cwhyte153 everybody's different! Some people like long explanations! Now you understand! Stop whining!

@415hispfemale 6 жыл бұрын

After researching for days, yours was the first video/article I found where the thickness of door in relation to the cup hole is addressed. That, and every other detail you’ve gone over make this by far and away, the BEST instruction ever on the web!! Thank you so much!!

@raminybhatti5740 4 жыл бұрын

Arguably the best KZfaq video on this particular subject. I'm currently planning to make and fit a medium-sized door for a space underneath the stairs using concealed hinges (inset), and I've learnt so much thanks to this video. Great stuff.

@mattanderson2053 6 жыл бұрын

many hours of research crammed into 21 min. best video on you tube that demonstrates how to fit these hinges. Thank you!!

@CharlieDIYte 6 жыл бұрын

Matt Anderson Thanks Matt - really appreciate that - thanks for taking the time to comment.

@joseenriquesanchezobaya2507 6 жыл бұрын

Matt Anderson yy

@tomcantwell4216 3 жыл бұрын

Agree with Matt! Thanks for this

@dufftime 3 жыл бұрын

Just wanted to say "thank you" for making this video. I consider myself pretty handy, but 100+ hours into a walnut cabinet build, I wasn't sure exactly where to drill. I had a pretty good idea, but wasn't sure until I saw your video. I also made a small prototype out of scraps to convince myself.

@pilateswithhazel2439 6 жыл бұрын

Thanks for this. I'm new to DIY and this helped me put a cabinet door on in my kitchen. Cheers! Couldn't have done it without this video!

@CharlieDIYte 6 жыл бұрын

That's great news. Thanks for the comment Hazel!

@themongru 5 жыл бұрын

Great video, tried installing these thinking it will be a piece of cake and it was a real pain. Funny that the information for concealed hinges was well concealed. ;)

@davidlaidlow1419 4 жыл бұрын

Thank you so much Charlie.I'm a Brit in New Zealand, and have worried over my ability to use these hinges for ages.You make it so simple.Well done.

@Photomomlove 6 жыл бұрын

Charlie, I am happy you found an audience here on KZfaq. You are clearly an amazing instructor. Clear, precise and to the point. Fantabulous! You took away all my apprehension installing a 170 degree Blum hinge.

@CharlieDIYte 6 жыл бұрын

Herma Ornes Herma, that's so good to hear - thanks so much for taking the time to comment (and so eloquently!)

@paulbull1993 6 жыл бұрын

Brilliant video, much appreciated. I used this type of hinge years ago and I was looking to refresh my memory. Your time, effort and video has certainly done that and more. Thank you so much.

@peterbell5491 2 жыл бұрын

Charlie, thank you for doing all the leg work for us budding DIYers. I was initially looking at your video of how to build your own circular saw guide track and stumbled on this excellent tutorial. I've bought myself a pack of 10 overlay hinges and was wondering how I'd get on. Thanks to your tutorial it should be a cinch, just a slight different setup. Keep up the great work 👍

@salz118 5 жыл бұрын

I am building a rather large buffet with three inset doors. I plan to use these same hinges for the first time and have been quite nervous about screwing it up. I like your suggestion about doing a mock-up and will try that. Thank you for taking the time to painstakingly document your experience and trials and errors. You have helped me more than you know and I am grateful.

@noelranasinghe3 7 жыл бұрын

thanks for uploading this video it's very helpful I was so confused of these hinges which one to choose and when to choose but after watching this video it cleard everything.thanks again a big thumbs up to you

@CharlieDIYte 7 жыл бұрын

clifford noel Cheers Clifford. Really appreciate that - and thanks for taking the time to comment!

@northavealum 5 жыл бұрын

Charlie - after 25 years in the house, my European hinges in the kitchen have succumbed to the abuse of 4 kids - so, I find myself needing to replace the hinges on 27 cabinet doors (well not all need it, but I'll take the opportunity to upgrade to soft-close hinges) - with many of them requiring repositioning to deal with damaged MDF around some of the cups. I've watched several KZfaq videos & your video is by far the best - I now am not freaking out over where to find the best hinges w/ soft close, and all the work to install them without screwing up. Thank you for the really detailed video on how to do it - including walking through the brochure, using a jig and a mockup. My blood pressure is now quite a few points lower! Great job.

@michaelhopkins812 5 жыл бұрын

Great explanation of inset door hinging. Precisely what I needed as a refresher course. I agree. A mock-up is the way to go.

@anthonydarmanin 4 жыл бұрын

Charlie, this is an incredible video! You explained all the steps in an easy to understand manner, how I wish that I had found this top grade instructional video before I hung my 22 cabinet doors! Thanks again.

@riaz1555 6 жыл бұрын

I have to say the details you have put into this video are fantastic. These hinges can be stressful to deal with and I really appreciate the effort it took you into making such an informative video. Many thanks Charlie.

@CharlieDIYte 6 жыл бұрын

riaz1555 You're very welcome. Thanks for the comment!

@RajdeepBorgohainRajdeep 5 жыл бұрын

Thank you so much I just want to use these hinges for my cabinet and this video gave me a boost up knowledge, and thank you so much for the PDF! Happy DIY

@ianamck 5 жыл бұрын

Charlie you are a genius. I think I was going through the same pain you did trying to find the right answers. But everyone speaks gobbledygook until you start to get your head around reveals, cups, types of frames etc etc. No one makes it easy for what should be pretty straight forward. Its not the first time I have bumped into your videos and this one has been a life save before I completely gave up and used some ugly ass butt hinges. THANK YOU

@mariah4451 6 жыл бұрын

A gift of a video. Ive got a box of old Ikea hinges that I wanted to use in the workshop I'm building from reclaimed wood and now I feel a lot more confident to do so. Thanks for sharing :-)

@30eesh 6 жыл бұрын

great tips...the best thing about the video ...no music..straight and clear talking....and like you mentioned tools than anyone can afford to pick up for a small project like this...thanks.....cheers...

@CharlieDIYte 6 жыл бұрын

Marc Peters Thanks Marc - glad you find it useful. I used to put music on my videos - which was a big mistake!

@joshgomez3870 5 жыл бұрын

I've struggled with these things for such a long time now. Thanks to your video I've finally cracked it. Thank you!

@equalibrium7898 4 жыл бұрын

Well worth the 90 minutes. Very descriptive and helpful. I wish all the others would be like this as we all need as much info as possible. Thanks

@MarceColucci 3 жыл бұрын

Charlie your videos are brilliant! Full of details and easy to follow. You just solved my soft close hinge problem on my kitchen cabinets. Keep up the great output you provide.

@calebgibson55 5 жыл бұрын

The ability to move the door at 17:00 is brilliant!!

@sssfff5058 7 жыл бұрын

This video was very helpful in getting through that enormous catalog to the actual ordering step.

@tporter23 7 жыл бұрын

Very helpful mate! I will be building a low-profile media cabinet for our home theater reno and this video has given me the confidence that this type of hinge will make doing inset doors no big deal. Thanks for doing all the research and hard work!

@CharlieDIYte 7 жыл бұрын

Terry Porter Thanks Terry! And I was in exactly the same position as you before I made this video. With a bit of good planning it's really quite straight forward. Go for Blum though. It's worth paying a little more for a quality hinge. Good luck!

@SJ-mn5cz Ай бұрын

As always great content. This guy has got to be one of the best DIY video makers. He seems to understands his audience and pitches his explanations at the right level.

@paulwilson6298 5 жыл бұрын

great video i watched it all i was confused about the hinge but after watching your video i am now confident,i have subscribed .a big thank you

@CharlieDIYte 5 жыл бұрын

Glad you found it useful, Paul, and massive thanks for subscribing!

@russhargreaves 5 жыл бұрын

You’ve made a difficult job so much easier. Thank you for the links to Blum as well. Loving their soft close hinges. I’m not a regular DIYer but thought I’d have a go after watching your brilliant video. Cheers Charlie!

@CharlieDIYte 5 жыл бұрын

Thanks Russ! Really appreciate you taking the time to post that. Do it - they're surprisingly easy to fit. You'll be fine. The trick is to make sure you buy the right ones!

@christophercharles3426 4 жыл бұрын

You're the man...!! Subscribed.. I'm a decorator by trade and been let down by someone who owed me a favour prior to this virus going on.. can turn my hand to most things and doing everything myself... having to make a unit I avoided this method as thought I'd wreck the MDF door.. but couldnt believe how easy and accurate it was following a couple minutes of your video.. you saved me getting more stressed..many thanks hope you and family stay safe at this crazy time..

@CharlieDIYte 4 жыл бұрын

That's brilliant news Christopher, and massive thanks for taking the time to let me know (and also for subscribing). I agree. They're a joy compared to traditional hinges. I'll be using them again on a big wardrobe build some time over the next few months. You too - it's mad at the moment isn't it!

@Samlol23_drrich 6 жыл бұрын

From halfway around the globe thank you so very much for taking the time to post this video. You are right there is very little information out there and your video is going to single-handedly allow me to install my inset doors properly. Cheers

@davidfarquhar3917 8 күн бұрын

Really helpful. My job is much simpler -replacing a broken kitchen cupboard hinge, but this video helped me understand how it all works

@CharlieDIYte 8 күн бұрын

Thanks David. Glad you found it useful.

@petesshed 6 жыл бұрын

Hello Charlie, just taken stock of probably the same hinges you presented on your video and you've helped me enormously. Excellent and extremely helpful video. Many thanks and all the best

@CharlieDIYte 6 жыл бұрын

Many thanks Peter - really pleased to hear it's helped you, thanks so much for taking the time to comment!

@coreybolden9841 5 жыл бұрын

Many thanks! I was helping a friend clean out a garage and found a bunch of hinges like these. Had no idea what they were even called! Now I know how to install them correctly & now I can use them for my upcoming cabinet projects. 😎😎😎😎😎

@CharlieDIYte 5 жыл бұрын

You're welcome. Thanks for the comment!

@andrew07885 4 жыл бұрын

Bloody excellent mate, I was almost at the point of taking the hinges back because they binded, so glad I you tubed first.

@garethbassett8186 4 жыл бұрын

By far the best video to do with hinge installation I've come across , thank you.

@davidmccormick8419 4 жыл бұрын

Super helpful! I'm about to create multiple fitted wardrobes in our house, and this has really given me some confidence.

@deanaoxo 5 жыл бұрын

First, thank you. Second, why on earth did anyone click the thumbs down? Third, helping me through a 105 page document, good grief, priceless. Mock ups rule. This is my first commercial cabinet build, and your video is one of the best. I'm going back to the drawing board, and hopefully ordering all my hinges today.

@smm855 6 жыл бұрын

Thank you so much. My lord I've been searching for hours trying to figure out what I did wrong when I picked the hinge!

@juliangardner3357 5 жыл бұрын

Thank you Charlie, I am looking to install inset hinges on a project I am working on, you have made the process very clear, much appreciated.

@CharlieDIYte 5 жыл бұрын

You're welcome. Thanks for the comment.

@stephenlwaters 6 жыл бұрын

I’ve looked at 15 of these videos...yours is by far the best! If you are ever in New Orleans I owe you lunch my friend!!

@PAPIOPA1 4 жыл бұрын

Thank you so much for the tutorial! I apreciate the effort explaining the catalogue, and those little tips that nobody teaches and are so needed when you have to put these hinges. I'm about to place my first ones and I bought a Forstner bit that I can use in my router, so that I can set the depth properly and keep the perpendicular exact. Greetings from Argentina. :)

@CharlieDIYte 4 жыл бұрын

Yes the router will give you a wonderful, perpendicular hole! Thanks so much for the comment, and good luck with the project. Humbled to hear from you in Argentina!

@davidedmondson1391 5 жыл бұрын

Wonderfully clear, concise and accurate. Thanks for your research which saves us loads of time.

@dph9885 6 жыл бұрын

Thanks Charlie - absolute superstar. Probably saved me an evening just on getting that Blum PDF - or even worse if I'd missed it I could have made a real mess of my new project. Great tutorial and whilst long - no fluff! All solid info.

@CharlieDIYte 6 жыл бұрын

DPH You're very welcome mate. Really glad you found it useful and massive thanks for taking the time to comment!

@karimasad2094 5 жыл бұрын

Thank you very much for this step by step guide on fitting hinges. I found it easy to follow and provided me with lots of information on completing hing fitting with confident.Thank again.

@aa7jc 5 жыл бұрын

Outstanding! Watched several times as I had the PDF in front of me.. Very helpful. Thank you!

@benjaminclarke5423 7 жыл бұрын

Thanks for the vid Charlie! Thanks to my kids it gave me the tips I needed to perform improvised hinge repair, cheers.

@mattliscott7323 3 жыл бұрын

Watched this at 3 in the morning to put me out but the geezer's that straight forward and clued up I watched it all. Nice one mate I'll defo download that brochure aswell. Fair play to ya

@lintonhusbands5657 4 жыл бұрын

Excellent video, I can't tell you how much research I have previously done, all to no avail, regarding the spacing of the hinges - wish I'd had this info 6 months ago. Thanks again.

@chrismiles6375 Ай бұрын

Charlie, your advice to do a trial fit of the hinges on scrap wood is INVALUABLE. Once done you can see how they work, and then work out, first whether you should change any of your measurements BEFORE you actually cut into your doors, and later how to adjust the doors. So much easier to do with the trial piece. Thank you so much for the tip, and to everybody about to fit hinges for the first time, follow Charlie’s tip...DO A TRIAL ON SCRAP WOOD FIRST!

@rfigalan 2 жыл бұрын

Wow, great video! This is what I’ve been searching for to finish my DIY hanging cabinet! Thank you Charlie!

@kbent88 5 жыл бұрын

What an absolutely fantastic video. Thank you so much for taking the time to make this!

@MrFlyingguy 5 жыл бұрын

i was looking for a refresher on distances from edge verus reveal and you are about the only english spoken one that covers this comprehensively, i'm off to wickes now! thanks. great video.

@CharlieDIYte 5 жыл бұрын

Cheers mate and good luck with the project!

@kbcbala 6 жыл бұрын

so beautifully made. I really appreciate the way the expained every step in detail.

@CharlieDIYte 6 жыл бұрын

You're incredibly kind - many thanks for taking the time to comment!

@KevinPhillipssb 5 жыл бұрын

Hi Charlie, another excellent video. Your explanations of the hinge details and what to look out for are priceless and will save a lot of time (and frustration if you buy the wrong hinges!).

@CharlieDIYte 5 жыл бұрын

Thanks Kevin. Really glad you found it useful!

@AddictedtoProjects 5 жыл бұрын

Really really useful video! Thank you so much for researching this, making the video and uploading it for us all to watch! I've got to tackle some cupboard doors this weekend, and this has given me the confidence to do it. After building myself a very useful little jig and a test piece! ;) Thanks!!

@kushsakhu 7 жыл бұрын

Once again...you give confidence to the novice. Much appreciated.

@roderickvillanueva3907 6 жыл бұрын

This is the most precise and well explained installation I have ever watched, nice vid mate

@CharlieDIYte 6 жыл бұрын

roderick villanueva Thanks for watching and thanks for taking the time to comment - comments like that make it all worthwhile :)

@kayozniwki 4 жыл бұрын

Great video! Exactly what I was looking for. Thank you so much! Your channel is very informative. Wishing you all the best!

@Stevesimmons2010 4 жыл бұрын

Thanks Charlie, you answered questions I did not even think to ask! These are now my new favorite hinges. And you are my new favorite instructor.

@CharlieDIYte 4 жыл бұрын

You're very welcome Steve. Thank YOU for taking the time to comment. It always gives me a massive boost to get positive feedback like that, as I brace myself for the next onslaught of video editing 😉. 👍

@mumumuesli4448 7 жыл бұрын

Hey Charlie, Great job, way past super professional! I installed a ton of these about 8 years ago, and as I tuned into the brochure on concealed hinges I was getting slightly overwhelmed using my brain power to re-connect to the intense specificity that Blum requires, This video was so VERY helpful in calming me down and YOU NAILED IT!! Thank you, great job, great articulation, fantastic deliver and super clear video work, thank you!!

@CharlieDIYte 7 жыл бұрын

You're incredibly welcome! Thanks so much for taking the time to comment - it means a lot. It takes an age to film and edit these videos, and yours and all the other positive comments help convince me to keep going! Like you, I took an age researching how to fit these hinges. Some of these jobs look pretty intimidating but the point I'm trying to put across on my Channel is that anyone can do it if they put their mind to it, do the research and have a little help from people like me! Thanks again!

@alisonsalt5149 3 жыл бұрын

Totally agree with the comment from Matt Anderson. Professional and comprehensive. I'm making my mock-up doors as I watch.

@CharlieDIYte 3 жыл бұрын

Thanks Alison - I really appreciate that. You'll love these hinges!! 👍

@ymca2818 6 жыл бұрын

Very well done. I will use this tutorial to install my cabinet doors. Thank you for your time and expertise. Mike from across the pond.

@rickychatt 5 жыл бұрын

Love this guy's video he explains everything perfectly and takes away some of the fear in attempting jobs like this

@CharlieDIYte 5 жыл бұрын

Thanks Ricky!

@jaz167 4 жыл бұрын

Thanks Charlie for refreshing my memory and making this easy, just off to fit 6 inset doors. If I remember, I'll let you know how I get on.

@bofrjojo 6 жыл бұрын

you made it very simple and not adding too much dialog. thank you, john

@CharlieDIYte 6 жыл бұрын

bofrjojo Thanks! Much appreciated!

@stevecolbourne8537 6 жыл бұрын

Well done!, I have been trying to sort out what I need and how to do it for the last two years. As you said, there is not a lot of info out there I started watching and then you said we have been watching for 19 mins, I couldn't believe it. Fascinating.

@CharlieDIYte 6 жыл бұрын

Cheers Steve - really glad you found it useful!

@angusdeuchars2152 6 жыл бұрын

Great video!! I’m just about to fit some of these in some furniture and this has really helped. Clearly a lot of effort went into creating this.

@CharlieDIYte 6 жыл бұрын

Cheers Angus - it certainly did but the feedback from you all has made it worthwhile!

@garvielloken3929 2 жыл бұрын

This hands down is the best video on concealed hinges and on navigating that monstrous blum website - Thanks charlie!

@CharlieDIYte 2 жыл бұрын

Thanks Garviel. I revisited this in the final video of my wardrobe build bit.ly/2UfXY4B 👊🏻

@TheAlmostInteresting 6 жыл бұрын

I've just finished hanging two doors using your method, Thanks for going in to such detail, it really helped!

@CharlieDIYte 6 жыл бұрын

Blueberryruby Really glad it helped. Thanks for letting me know!

@garethgordon9141 4 жыл бұрын

Top man Charlie; excellent video especially the detail on the Blum catalogue, also like the two layer MDF door construction to create the Shaker effect, thanks for the effort that you have put into this.

@rossmillington344 5 жыл бұрын

Great video, that alongside your other wardrobe creation video really helped and gave me the confidence to tackle it myself. So glad I did it, looks great Thank you

@jill-of-all-trades 6 жыл бұрын

Thanks Charlie! I had already visited the Blum site and was overwhelmed for a newbie. Your video helps!

@CharlieDIYte 6 жыл бұрын

You're welcome - thanks for the comment! I've got to say I was when I started off with these hinges, which is why I thought the video would be useful!

@mrabimohammad9280 4 жыл бұрын

Thank u ,,, I have worked with carpenters and asked about how to do it and the only thing they say oh it’s so easy and no one would tell u how to do it , don’t know why .. thank you for ur time mate and effort to help make it easy

@glennrudolph9867 2 жыл бұрын

Thanks for taking the time Charlie, a great detailed video on Blum Hinges - you have saved me hours of Blum learning curve(s)!

@CharlieDIYte 2 жыл бұрын

You're very welcome Glenn. Here's an updated video with a few new tips kzfaq.info/get/bejne/qsp9odGc26_Sonk.html 👍

@janjoshika 5 жыл бұрын

Excellent info on these hinges wasn't aware of the different cranks, much appreciated.

@abdallahawwad1460 5 жыл бұрын

Thank you ..I have asked a lot of carpenters and non of them helped and they all said oh it’s so easy ,,, thank you for this great video

@m.a.9471 5 жыл бұрын

Thank you sir for uploading such a detail information video which other you tuber neglect. 👍

@CraftyLittleMaker 6 жыл бұрын

Great stuff mate, I'm using those same hinges tomorrow and I think thus just saved me a good afternoons worth of head scratching!!

@JAHManeShaker 3 жыл бұрын

This video is SO helpful. I'm just about to build a cabinet to cover a boiler out of some old IKEA wardrobe parts I got for free. They originally had sliding doors so there were no holes cut for the concealed hinges. I was dreading doing all the maths to figure out where to drill the 35mm holes so this video will be my reference through the whole process. Thanks Charlie!!!

@CharlieDIYte 3 жыл бұрын

Funnily enough I've got a load of doors to hang for my wardrobe build, and I've just rewatched this vid to remind myself how to do it 🤣 I've bought no fewer than 3 template tools on the internet, including a Blum one and no-one of them have the holes in the right place so I'm afraid it's best to work it out yourself based on the hinges you've bought.

@dexslazenger6938 3 жыл бұрын

Epic, concise and detailed have much better idea about these hinge type, as always research is key and thanks for the explanation. The beauty about watching Charlie is he make you want to try, I have a shed load of tools just sitting in a garage, well that's going to change. Not only have you inspired me you have given me more avenues for work, so for that I thank you.

@CharlieDIYte 3 жыл бұрын

Thanks so much, mate. Get those tools to work. Forget videos being epic, it's you who will feel epic as you survey your newly completed DIY 💪🏻👍🏻

@bmcateer 5 жыл бұрын

Legendary tutorial. That's my weekend sorted!

@Don-xy8cy 6 жыл бұрын

What an awesome informative video. You have saved me a lot of time and probably saved me a few doors. Excellent video, thanks!

@nicolalonsdale7428 2 жыл бұрын

So helpful! We had such a nightmare with some hinges but feel much more confident for our next project now.

@CharlieDIYte 2 жыл бұрын

You're very welcome Nicola and here's an update video of you have a few moments kzfaq.info/get/bejne/qsp9odGc26_Sonk.html

@bradjones5266 3 жыл бұрын

Just had to write you a quick note. This is an awesome step by step video....love it Charlie! Thank you

@CharlieDIYte 3 жыл бұрын

Thanks so much for taking the time to send that Brad. Really glad you found it useful! I'm just about to start a major wardrobe build so keep an eye out for that 👍🏻

@stephj1002 4 жыл бұрын

Holy macaroni, You definitely have the best install video! I've watched other videos and was always left with questions. Even the hinges I have are different brand, I know how to install them from looking at your video!

@CharlieDIYte 4 жыл бұрын

Thanks Steph - incredibly kind of you to take the time to comment. Good luck with the install 👍

@pinventor5401 4 жыл бұрын

Clearly explained, contains all necessary detaiks well done.

@nickrutter9231 7 жыл бұрын

Fantastic tutorial Charlie, very clear and precise.

@CharlieDIYte 7 жыл бұрын

+Nick Rutter Thanks Nick. Really pleased you found it useful!

@Wintersoldier666 6 жыл бұрын

assamly almari seting

@RashidAli-nh4hs 6 жыл бұрын

Nick Rutter nice

@philgarcia5552 2 жыл бұрын

Thanks for your tutorial it made my three-day job a bit easier.

@CharlieDIYte 2 жыл бұрын

You're welcome Phil. Thanks for the comment 👍

@jeffrey4113 6 жыл бұрын

Amazing video - Very articulate and easy to follow as this seems simple but actually it can be quite difficult to understand all the different options.- Thanks Charles

@foothills99 7 жыл бұрын

Charlie, thank-you for this. Excellent instruction. Really helped.

@CharlieDIYte 7 жыл бұрын

Thanks for taking the time to comment - much appreciated!

@dx5871 7 жыл бұрын

What a great video! Thank you for taking the time to make this very detailed explanation. I'm still not 100% sure i can do this properly, but I am going to have a crack at it! Thanks

@CharlieDIYte 7 жыл бұрын

Thanks Daniel - much appreciated! You will be able to do it - remember, I hadn't fitted one of these before doing the video!!

@dx5871 7 жыл бұрын

Well thanks again. I just did the first (of 12!) and it was a screaming success! I really appreciate your video!

@CharlieDIYte 7 жыл бұрын

Daniel C That's awesome news! You see - I told you you could do it! Thanks for taking the time to post the update. Makes all the hours of video'ing and editing worth while!

@lshamby 6 жыл бұрын

thanks for taking the time to make this video. VERY helpful !

@CharlieDIYte 6 жыл бұрын

lshamby You're welcome. Thanks for the comment!

@Glen.Danielsen 4 жыл бұрын

Charlie, thanks so much for a thoroughly helpful video! So well-done. Cheers from the States! 💛😎

@CharlieDIYte 4 жыл бұрын

You're very welcome, Glen. Thanks for taking the time to comment and great to hear from you (I'm always humbled to hear from people outside of the UK). Trust you're keeping well in these surreal times.