No video
How to narrow a rear end, Dana 60, or widening. Part 2/2.
Рет қаралды 1,576
2 жыл бұрынIn this video I continue the work on the Dana 60 that was to short. I was able to borrow a lathe. Thank You Ivar for that. And could manufacture a piece to widen the Dana to correct length. It was then welded first with mig and then with stick-welder. Thank you also Emil for the help with the camera and turning the axle while I welded.
#howto #how to #narrow #widening #Dana60 #Dana 60 #repair #ifixmycarmyself #fixmycarmyself #oldschool #rebuildingcar #rebuilding #car
@onetonf350 2 жыл бұрын
Seams like fantastic accuracy and quality.
@patknoblock5599 Жыл бұрын
Thank you for sharing your knowledge, sir
@korn111685 2 жыл бұрын
Sir! You do excellent work!
@ifixmycarmyself2502 2 жыл бұрын
Thank you for the kind comment!
@NoName-ml5yk 5 ай бұрын
I like the coupler, but that axle is not straight now.
Дима Масленников
Рет қаралды 4,3 МЛН
Aired Down
Рет қаралды 19 М.