How to patch semi truck tire on the road by yourself Step by step

Рет қаралды 18,082

Күн бұрын

Technician's Resource Branded Heavy Duty Vulcanizing Cement, 8 Oz. Can, 6 Per Case, new
amzn.to/36cQl2G
AstroAI Air Chuck, Heavy Duty Closed Flow Lock On Tire Chuck with Clip for Inflator
amzn.to/36a3Ksj
1 1/4" Corrugated Tire Repair Stitcher, Ball Bearing Wood Handle
amzn.to/3j3DDHe
Steelman Tungsten Carbide Buffing Wheel with Adapter, ⅜ Inch Arbor, Compatible with Steelman Heavy Duty Low Speed Tire Buffer
amzn.to/2S2ahNM
Milwaukee 2867-22 M18 Fuel 1" High Torque Impact Wrench (8.0ah) Kit 2867-22
amzn.to/3i83E6W
Flexzilla Truck Tire Inflator Kit with 3/8 in. x 50 ft. Hose, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HGH2-FZ
amzn.to/2RYRRgT

Пікірлер: 75

@antoniolerma5159 3 жыл бұрын

great job man, quick tip . use less cement and allow it to dry a little before you apply the patch, that will ensure the patch bonds better and it doesnt leak

@robertgarrett7007 3 ай бұрын

Great job sir! You have done that before. Thanks for the video.

@TolaTrucking 3 жыл бұрын

You're the man buddy You probably never call road service

@TRUCKINGTIPSDIY 3 жыл бұрын

thank you sir , appreciate it 🙏

@marrow1154 3 жыл бұрын

Just happen to crash into your channel it is so informative I think i am already addicted to it

@markm0000 3 жыл бұрын

Man I’m watching almost every video so much info you never learn

@Rocky-fd8jf 2 жыл бұрын

Amazing videos ! you are doing good job for truckers thank you 🙏🏻

@ladytrucker50 2 жыл бұрын

Keep up the good work and for showing us how to get the job done!! Be safe out there

@TRUCKINGTIPSDIY 2 жыл бұрын

Thanks for watching!!!

@Hellokinni 11 ай бұрын

Wao You are good Hats off

@rclarke2456 3 жыл бұрын

Thank you so much you helped me so many times

@danmcdonough8514 3 жыл бұрын

THIS GUY (MUST ) BE THE OWNER, NEVER HAD A DRIVER FIX ANY TIRE OR PROBLEM !!!!!!!!!!

@joseguerra1910 Жыл бұрын

you saved a lot of money and time

@TRUCKINGTIPSDIY Жыл бұрын

Thank you for watching, im glad this videos helped you!!

@tollivermatt 3 жыл бұрын

It's actually a 33mm incase u wanna know the correct size. Also use a impact rated socket not a chrome

@jitskid831 2 жыл бұрын

Great video brother appreciate all the info got to save me some money and start doing this myself. out here in Paso Robles California it’s $50 to repair a tire with a nail✌🏼.

@Saltacokote Жыл бұрын

give you the liked just for the thanks BUT you fail to show how to inflate the tire without no blast air tank.

@TRUCKINGTIPSDIY Жыл бұрын

👍

@snipermex13 2 жыл бұрын

Great video homie

@jorgefacio690 3 жыл бұрын

great video 📹

@adolphushardy5186 3 жыл бұрын

good vid. saved a ton of money

@TRUCKINGTIPSDIY 3 жыл бұрын

thanks for watching sir!!

@sonxairasakhamdee2178 3 жыл бұрын

Good stuff brother 👍🏼

@TRUCKINGTIPSDIY 3 жыл бұрын

thank you sir!!!

@sonxairasakhamdee2178 3 жыл бұрын

TRUCKING TIPS DIY Brother where did u buy the (air chuck tool thing) the one you put air into the tire without the stem/restrictor. You know what I’m talking about? I see all the tire guy have it. They be putting the air into the tire fast!!! And then they put the stem in. I hope I make sense😬😁

@TRUCKINGTIPSDIY 3 жыл бұрын

@@sonxairasakhamdee2178 yes i got it from amazonm i just put a link in the description if you want to take a look at it, thanks

@quymai3516 3 жыл бұрын

Thanks for a video

@TRUCKINGTIPSDIY 3 жыл бұрын

Thanks for watching sir 🙏

@sunwaterflowz 3 жыл бұрын

Good Job

@angelgonzales9422 3 жыл бұрын

Good job

@TRUCKINGTIPSDIY 3 жыл бұрын

Thank you sir!!

@EDWINLOPEZ-xt9ze 3 жыл бұрын

Awesome video friend.... do you have any videos on trailer abs sensors ?

@JS-jv6rg 2 жыл бұрын

Does that milwaukee torque tool adjust to torque specifications or just get lug nuts tight enough?

@vicentehernandez3821 3 ай бұрын

No beed seater question mark.

@quocbinhduongnt8646 3 жыл бұрын

clip này cũng hay lắm anh ơi

@kylec166 2 жыл бұрын

I do big truck tires on garage trucks / trailer every week.

@coloradojeeperjenny9661 3 жыл бұрын

That's cool and it doesn't look too hard..did you ever find out what was wrong with your truck from the previous video?

@makeitpay8241 3 жыл бұрын

i would 1st put a plug in the hole then cut if off flush inside the tire then patch the inside so the patch has a better chance of working

@TRUCKINGTIPSDIY 3 жыл бұрын

Thats another way to do it, that also works, thanks for watching sir 🙏

@markm0000 3 жыл бұрын

That’s so easy I can do it. Where do you buy the tire bars and patches? Thanks for the helpful video

@otrookie 3 жыл бұрын

Harbor freight, northern tool, amazon etc

@markm0000 3 жыл бұрын

@@otrookie I don’t trust big corporations that abuse workers and support slave labor. I buy local whenever possible. I got a set of tire irons and all the other stuff you need for $200 at the local farm supply store. I’ll go back to get a 20t jack and stands so I can do inner tires and rotations.

@TRUCKINGTIPSDIY 3 жыл бұрын

I got them on amazon

@hobbytechtv7007 3 жыл бұрын

Good video. Where you get the big impact

@TRUCKINGTIPSDIY 3 жыл бұрын

i got ti from amazon i have a link in the description

@elmilamores7686 Жыл бұрын

How did you pop the bead back in when you mounted the tire back to the rim again?

@TRUCKINGTIPSDIY Жыл бұрын

If it doesn't pop in place check this video kzfaq.info/get/bejne/n9uldMp40JPbaJc.html

@purposepsm7732 Жыл бұрын

WAT are the machine u used to inside the tire, the one with a wheel for the patch and the other for scraping unside

@TRUCKINGTIPSDIY Жыл бұрын

Check out the description on the video i have links

@bareqali7169 3 жыл бұрын

Good job brother. Which model is the The Small Milwaukee ?

@TRUCKINGTIPSDIY 3 жыл бұрын

thank you sir,, its the 2867

@bareqali7169 3 жыл бұрын

TRUCKING TIPS DIY thanks 🙏

@optionout 3 жыл бұрын

Good vid. Have you ever had a patch leak?

@TRUCKINGTIPSDIY 3 жыл бұрын

yes, sometimes the patches dont hold very well, but I just put a new one and thats it, that happens at the tire shops too, thanks for watching sir!!

@optionout 3 жыл бұрын

Last question: How did you get the tire to catch the rim, completely flat? Ive seen those tire guys use that that air explode thngy for that?

@TRUCKINGTIPSDIY 3 жыл бұрын

some tires will inflate normal like this one did, other will need the tool (cheetah) or use starting fluid and lighter to inflate it, check out the vide i made using starting fluid

@optionout 3 жыл бұрын

@@TRUCKINGTIPSDIY LOL I'm a pyro, so I'd like that! TY.

@symtex36 4 ай бұрын

Why would you put it on the u bolt?

@TRUCKINGTIPSDIY 4 ай бұрын

You can put it where you like, im just used to lifting it from there

@manuelzarate4629 3 жыл бұрын

Can you put a patch on steer

@TRUCKINGTIPSDIY 3 жыл бұрын

Its not recommended to patch steer tires, I heard shops wont patch them. I also seen people patch them and had no problem. Thank for watching !!

@luisalv9884 2 жыл бұрын

👍🏼👍🏼👍🏼

@rocksoul808 3 жыл бұрын

how much would you charge for a patch like this?

@TRUCKINGTIPSDIY 3 жыл бұрын

Im not sure how much they charge, i just do it for myself

@truckergangvlog5727 3 жыл бұрын

Better tools fixed harder problems best tools fixed hardest problems no tools fixed no problems

@manuelzarate4629 3 жыл бұрын

Can you put a patch on steer

@thereviewer4173 3 жыл бұрын

@@manuelzarate4629 It’s probably illegal. You don’t want to risk getting a blowout on your steer and possibly cause an accident. Too much liability.

@user-hy5ry6mt4c 11 ай бұрын

What about the way to inflate the tire 🤔

@TRUCKINGTIPSDIY 11 ай бұрын

I have a hose connected to the air thanks but you can use one of these amzn.to/43e1oT7

@kirkbrown2147 3 жыл бұрын

Next time put air in your tire before you put the valve stem in, it's much quicker. Invest in a torque wrench

@jacobhalliday8896 3 жыл бұрын

The battery’s not 12 volts it’s 12 amp ours

@TRUCKINGTIPSDIY 3 жыл бұрын

yes i messed up

@markm0000 3 жыл бұрын

A tip on the lug nuts put oil on the bolt before taking them off and putting them back on. It helps torque them down properly and you prevent over tightening.

@SergioPena20 2 жыл бұрын

Putting oil on the threads changes the torque specs. That’s why anything critical will give you a dry torque and a wet torque. I’ve never put lube on any threads that didn’t call for it.