How to Polish Your Car. Low Cost super effective way to un-scratch your car.

Рет қаралды 168,278

Күн бұрын

How to Polish Your Car. Low Cost super effective way to un-scratch your car.
I show you a great and extremely low cost way to polish your car yourself.
Affiliate links to buy:
Drill Polishing Kit: amzn.to/3l4w4Se
Cheap polisher for whole car: amzn.to/2pJF9YD
Polisher/Sander for whole car or spots: amzn.to/2qILqnQ
Quality Polisher: amzn.to/2D9MkN5
Quality CAR POLISH: amzn.to/2QGBt58
Cutting Polish: amzn.to/33fYvlX
Paste polish: amzn.to/2D8wPVu
Thanks for watching this Mark's reviews and Tutorials video. Mark is not a trained mechanic. Just a car guy that loves to drive and work on cars. What I do here may not work on your car and I am not intending to give professional advice for you to work on your car. But if you do know a bit about cars then hopefully watching these videos will help you to sort out what is going on with your car. Mark is not liable or responsible for any damage you do or things that happen to your car or yourself.
Cars are complex and dangerous things and not only can you be hurt working on them but you can also do serious and expensive damage to your car.
Cars should be worked on by qualified people, don't over reach.
Talk to a qualified mechanic if you are in any doubt.
Please subscribe for more videos.

Пікірлер: 73

@hanglengoc8064 Жыл бұрын

*Good **MyBest.Tools** power and rpm control.*

@maureenamos7868 7 ай бұрын

Thanks Mark for a no nonsense affordable way to clean up small scratches on my car. I'm off to Amazon to buy the drill adaptor and pads. BTW, nice voice!

@kryptoniangod Жыл бұрын

Awesome mate but I would use a micro fibre cloth to remove excess as you can put fine scratches back into your car with that towel 👍

@asadmehmood3518 11 ай бұрын

Thanks for very helpful tutorial for newbies 👍

@TheScary79 4 жыл бұрын

Hi Mark did you end up making the vid of a full polish of your car with the worx polisher I have the same polisher.

@syl7180 3 жыл бұрын

Nice video!

@kruno45 3 жыл бұрын

Awesome job!

@Marksreviewsandtutorials 3 жыл бұрын

Thank you! Cheers!

@jackholmes6964 6 ай бұрын

Yeah good idea mate but if I may say 2 points firstly you need to keep the pad flat and secondly a better pad may I recommend meguiars or rupes but you did well .

@kennymasooa4488 2 жыл бұрын

My question is I just Bought a Bosch Drill Machine 570 watts I want to do the car with a Polish just Normal. POLISH shield brand xan I Do it

@ricoricky98 Жыл бұрын

These pads work amazing thanks for posting i bough them after watching great results

@Marksreviewsandtutorials Жыл бұрын

Awesome. Thanks for commenting your results. 😃 MRT

@badfisssh41 4 жыл бұрын

that rough patch on the hood. I would have sanded down with a 4k wet sand, spray light with a fresh layer of clear coat, sand again to smooth out, then cut n polish. if you still have the car, I would like to see how that turns out.

@Sir-Reborn 3 жыл бұрын

4k isn't gonna do anything to that. I would've hit it with 600, THEN touch it up with paint and clear coat. Then after a few days, I would compound and polish it to match

@amj76425 2 жыл бұрын

How to get born again or saved ttps://kzfaq.info/get/bejne/osiSZ9uovtCVaZs.html The Gospel 1 Corinthians 15:1-4🕊🕊

@kungfusing1 2 жыл бұрын

You would clear coat over a 4K wet sand? That won’t last my dude.

@zafarveqar6642 3 жыл бұрын

nice video

@Achabab 7 ай бұрын

Waw sooo 👍😊 appreciate

@behramcooper3691 3 жыл бұрын

Are the sponge pads better than the woolen ones available at Bunnings?

@Marksreviewsandtutorials 3 жыл бұрын

I put some links to purchase in the description. You need to match the size.

@6atlantis 3 жыл бұрын

Do you think a cordless drill with those plate and foam adapter kits are strong enough to burn the paint, or do you think I shouldn’t worry as much because the cordless drill prob doesn’t have the same power as a rotary?

@Marksreviewsandtutorials 3 жыл бұрын

It is really quite safe. As long as your paint is in good condition. Cordless will have to be a good one to have enough power

@deasttn Жыл бұрын

LPT, offset your pad a bit so it creates a more random orbit pattern.

@Mech.E Жыл бұрын

@@deasttn this helps if you have swirls right?

@deasttn Жыл бұрын

@@Mech.E it sure can help. Just test and practice

@1gurugraphics 4 жыл бұрын

I will try on my car. I didn't use water with cut polish. I will try again with water. Thanks for tips.

@badfisssh41 4 жыл бұрын

I forgot to mention to add wax at the end. Dont forget that. Goodluck.

@user-zb8lm6iu7u 2 жыл бұрын

Great Video. but why you did not use woolen pad?? are they are not more effective on removing scratches??

@Marksreviewsandtutorials 2 жыл бұрын

Woolen pads tend to give ghosting and swirl marks. The foam is best especially for beginners

@Robbie-mw5uu 10 ай бұрын

@@Marksreviewsandtutorials no the reason you get swirls and scratches is because you're using a drill not a polisher

@andrewwhite1665 Жыл бұрын

Should have used a microfiber cloth demistrating this...that towel does nothing but add more swirls and blemishes

@kizovwmk361 2 жыл бұрын

125mm, 150mm?

@antoniosmav.5865 4 жыл бұрын

You forgot wax to protect the paint

@badfisssh41 4 жыл бұрын

Yes I did.

@hozairwasseli7986 3 жыл бұрын

This guy is just like me: "You should put gloves on..., but whatever"

@paulhunter123 2 жыл бұрын

yeah me too always use a respirator when spraying too, whatever ill just hold my breath then run away lol

@luisponce1472 Жыл бұрын

You barely Touched the Car and then the Scratches Come right off nice Gentle Touch 😎👍

@mircea5013 Жыл бұрын

oooo, he touched the car alright. You have a really good chance of destroying your clear coat if you start doing that.

@Baksan_Dog1988 3 жыл бұрын

thanks for this video.. but just one question how can I get it work on my impact drill do i need specific adopter on that kit? Your help & advise would be much appreciated. And new sub here. Thanks

@Marksreviewsandtutorials 3 жыл бұрын

Most impact drills have a switch to turn off the impact effect. If not you cannot use it. MRT

@Tahsin_Hussain 2 жыл бұрын

Can it remove DEEP Scratch?

@goldenultra 2 жыл бұрын

Use needle oem touch up pen, then rubbing compound...

@michaelanderson3703 3 жыл бұрын

Can you use a battery li.ion drill its a 18v Mikita

@Marksreviewsandtutorials 3 жыл бұрын

As long as the gear is in good condition that should be fine. It just may take longer. 👍

@thelightning0346 Жыл бұрын

do you need wax after polishing?

@Mech.E Жыл бұрын

Yes

@simonpatcharin 3 жыл бұрын

Drill polishing kit is out of stock! You know anyone else?

@Marksreviewsandtutorials 3 жыл бұрын

YES Thanks for letting me know amzn.to/3l4w4Se

@zoltizolti3165 3 жыл бұрын

Sziasztok!

@rayjohn0111 2 жыл бұрын

Will the scratch become visible again after washing the car?

@gratzemaria 2 жыл бұрын

Same question here

@3bullzgaming442 2 жыл бұрын

You said the car needed to be clean. Thats filthy?

@deasttn Жыл бұрын

Deep scratches very well might be visible after washing. Polishing is a lot like sanding the clearcoat. If the scratch is not very deep, you can "sand" it smooth. Deeper scratches require more polishing, just be careful about polishing away too much of the clearcoat

@andrewwhite1665 Жыл бұрын

But I can say this never and I mean never use cloth towel only fibers

@theblindbegga5897 11 ай бұрын

There's that word again" Super "?

@simonpatcharin 3 жыл бұрын

Lol whateva!

@tinastaley625 11 ай бұрын

Dewalt it’s best

@hackedlion 4 жыл бұрын

Can’t hear shit

@bradgretch 3 жыл бұрын

I think you may need to replace the carbon brushes in that old girl of yours.....

@Marksreviewsandtutorials 3 жыл бұрын

Yep you saw right. She’s dead now. Went out in a big smoke cloud. 😞

@bradgretch 3 жыл бұрын

@@Marksreviewsandtutorials hahaha

@deanvall3784 3 жыл бұрын

drills for buffing does a lousy job, do it the old fashion way by hand with lots of elbow grease.

@Swenser 3 жыл бұрын

Like karate kid. Wax on wax off

@gogators5762 2 жыл бұрын

Words of wisdom. By hand is alot better than using a drill. Ask me how I know!!

@KevinHPhotography 2 жыл бұрын

@@gogators5762 why is it better to do it just with your hands? I was about to get those drill adapters

@gogators5762 2 жыл бұрын

@@KevinHPhotography i have the adapters as well. I've done it both ways and by hand always seems to look alittle better. Maybe im tripping but that's how i see it!

@KevinHPhotography 2 жыл бұрын

@@gogators5762 what about in terms on time spent by hand vs. Drill adapter? Is it that much efficient? Only time I did it by hand took me like 4 hours and a lot of shoulder fatigue haha, that’s why I am considering the drill adapter