How to Properly Install Three-Tab and Architectural Shingles on a Roof

Рет қаралды 58,320

Жыл бұрын

This video talks about the proper method for installing both three-tab and architectural shingles. It covers the basic layout and considerations.
Go now to www.RoofingIntelligence.com to get the entire multi-part video series with all the information you'll need to install a shingle roof yourself. This video series is available to stream immediately online or to purchase as a DVD.
Chris Lutz is a professional roofer in Georgia and created RoofingIntelligence.com to teach people how to install a new roof themselves or to improve as a professional installer.

Пікірлер: 31

@cuz6657 8 ай бұрын

I think you are an excellent teacher. A lot of brilliant information that I needed to know. Now I'm ready to start my roof on my carport! I can do this!

@andyhawkes9638 Жыл бұрын

The clearest best explained method i have found. Excellent thank you.

@donhendricks2950 Жыл бұрын

Thanks so much for sharing your time and experience to help us DIY'ERS.

@mrstyle_67 Жыл бұрын

Have you ever considered the starter being cut at a 45 on the end so you don't cover the tar strip?

@MaMa-qh4dy Жыл бұрын

EXCELLENT. Thank you.

@arthurmiller8336 9 ай бұрын

Wow thank you great tips iam learning a lot

@RoofingIntelligence 8 ай бұрын

Happy to help!

@alaingoyette3883 Жыл бұрын

Why not racking the laminated shingles? I would like to get more details about it.

@bigbrotherinlife1654 Жыл бұрын

Is there a roofing vocational school where one can enroll to become a skilled roofer?

@michaelross8304 Жыл бұрын

shouldn't the bottom starter be under neath the ridge side.

@sc29229 Жыл бұрын

Using your method on the 3Tab…what happens if you get to the right side and you’re short an inch or so or something far less than 6 inches?

@jakalconstruction 11 ай бұрын

Cut a tab off your second to last shingle. Then your final piece on the edge will be much more substantial. You don’t wanna nail on a 1 inch piece

@WarMachine550 11 ай бұрын

With a 3 tab, what do you do when you get to the edge of the roof and you only have an inch or two left to cover? You dont want to nail down a 2" strip of shingle. So how would you cut last full shingle in order to have at least 6" of shingle to end the roof edge?

@wrenchboostboi8994 10 ай бұрын

Say you see youre gunna end up with 2” final: Cut a tab off the second last shingle (the one just before the last) just make sure its a straight cut for proper butting, which sets up the final shingle to be a tab + 2”. This way will keep the pattern. You could also cut the last two shingle lengths equal and split that gap but this will break the pattern and probably not what you want. Just get creative and do what you can to get it covered… no wrong way really, just ok and better. Thats what make’s architectural a bit easier to finish off rows, you dont have that water line pattern to maintain

@kamelalfa3976 Жыл бұрын

Veuillez demander la durée de validité de Changels IKO

@user-td5hr9co1x 7 ай бұрын

How do u reach that second , higher up bracket nail once a shingle is over it?

@RoofingIntelligence 7 ай бұрын

Reach under there with your flat bar and carefully pry it up.

@Cozcacuauhtli Ай бұрын

THE EXPLAIN THANKS

@davidholmes7215 Жыл бұрын

What is the right way for the nails roofer's telling me the nails go in the tar for three tabs shingles Sir what is the right Way Sir please tell me im putting up my three tap shingles Sir

@RoofingIntelligence Жыл бұрын

Each package of shingles includes instruction on where to nail them correctly.