How to re-use the chip for Dymo 5 Series Printers (550, 550 Turbo, and the 5XL LabelWriter? Bad News

Рет қаралды 28,682

2 жыл бұрын

In this video, I test out tricking the DYMO Chip in the DYMO 550, 550 Turbo, and the 5XL.
USE COUPON: youtube15 FOR 15% OFF YOUR FIRST ORDER
www.enkoproducts.com/?s=dymo&...
Comment below with video requests or suggestions!
Subscribe for more.
Comment below
Like if you like
enKo Products believes more than anything, in bettering the lives of its consumers. We’ve been lucky enough to do that, through a combination of speed, convenience, and affordability. Shop for Zebra compatible thermal labels, Dymo compatible labels, Brother compatible labels, Laser Printer labels (same size at avery), shipping and handling labels, and packing material at enkoproducts.com.
10% off first order for new members!
*enKo Products does not sell Avery, Dymo, Zebra, and Brother branded labels.Avery, Dymo, Zebra, Brother and other manufacturer brand names and logos are registered trademarks of their respective owners. Any and all brand name designations or references are made solely for purposes of demonstrating compatibility.

Пікірлер: 62

@cherylramsay7171 Жыл бұрын

I was only able to print 44 compatible labels from a finished dymo labels paper of 500

@enko.labels Жыл бұрын

Yeah, I don't think there is a way to hack it. People say they can but no one says how many they can print after it is empty. 44 is close to what I can do and then its trash.

@cherylramsay7171 Жыл бұрын

Ok..I went ahead and buy dymo 450 that can use the compatibles...and return the 550 ( too much money for it label paper)

@enko.labels Жыл бұрын

@@cherylramsay7171 agreed! Happy to hear you could return it!

@jackcasement2892 11 ай бұрын

Yes

@tarekmokhtarmohamed4255 9 ай бұрын

i have 450 but it did not accapt third part lable , what should i do?@@cherylramsay7171

@redkitty7511 Жыл бұрын

You just fucking saved me from so much stress and returning labels and having a shut fit!!!! Thank you

@philcrocker7013 Жыл бұрын

Red Kitty, profanity is never respectful nor professional.

@adlewers Жыл бұрын

This has worked for me so far and im very thankful!

@SunshineDay-fv5lh Жыл бұрын

You are a freakin genius, it worked! Thank you friend!

@jackcasement2892 Жыл бұрын

I had already bought my Dymo 550 before I realised that I couldn't use my non-Dymo labels. Your video was helpful because I just placed a full roll of Dymo labels against the Dymo printer and it perfectly printed my non-Dymo labels. I don't care about the numbering. Thank you

@WeirdFlex Жыл бұрын

did it continue to print after the numbering ran out?

@mbosschaart 10 ай бұрын

but now you can't use that Dymo roll anymore. Unless you sell it to someone else assuming they store the ID of the roll and the count in the printer. If they write to the actual chip, you're screwed.

@LichaSF67 3 күн бұрын

Great idea! I think I will order some dymo labels, use the chip as shown here to print my generic labels, and then return the unused Dymo Roll back to seller....hopefully that will allow me to use my non-Dymo labels and not throw them out. lol!! Thank you!

@williss3753 19 күн бұрын

Thank you!

@enko.labels 17 күн бұрын

absolutely!

@cherylramsay7171 Жыл бұрын

My good God it works 😅😅😅...I bought original dymo labels paper for $50+ in office Depot and a compatible on Amazon that didn't work ( compatible is 480000 labels for $157) I run into this video and try it after the dymo labels finished and try this and it works...Im so happy cause dymo labels are very expensive....

@enko.labels Жыл бұрын

so sorry it didn't work longer. I wish more people would follow up in the comments and update that it actually does not work. It makes the whole thing misleading. Thanks for your comments, especially the follow-up!

@moleculeinc Жыл бұрын

As of the date of this comment, I cut out the RFID from the roll AFTER the label hit zero and the RFID still worked. I simply cut out the RFID with the cardboard still attached (do not peel the RFID off!) and taped it to the side and it works perfectly. I tested it on a roll that had labels and another that I finished all the way through. They both worked. I think there is a secret for this to work. My DYMO app says that my printer is disconnected. This may be why the trick works with me. Again, as of date of the comment (12/6/22) the trick works for unlimited prints.

@enko.labels Жыл бұрын

Please let us know if anything changes!

@RunballRally Жыл бұрын

How many prints did you do so far? And what is the max the RFID normally should print? We bought this dumb 5XL device without knowing it has this restriction..

@enko.labels Жыл бұрын

@@RunballRally good question

@RunballRally Жыл бұрын

@@enko.labels we return it.. official dymo labels for the 5xl came in today, and now it was paper jam... fun fact. Wasted 400 blanc labels that can't be used now... any Is the Zebra 220 good?

@thepalacegi6795 Жыл бұрын

Works fine !!!

@jameshoogendoorn567 5 ай бұрын

Have you tested these outside of dymo programming? I currently use dymo 4's, and I print through Online Labels Maestro Label Design program. Wondering if the chip reacts the same way, or if the chip is even needed off of dymo programming

@enko.labels 4 ай бұрын

I believe I did, I can test again if there is interest. But from what I remember it just throws up an error still.

@nateperry7623 Жыл бұрын

I fucking LOVE how this video is sponsored by Enko lmao!!

@mikey0004x0 Жыл бұрын

Will this apply to dymo 4xl also , because I would love to use the compatible labels , would save a fortune

@enko.labels Жыл бұрын

The 4XL does not use the chip, so you can print with compatible labels with no issues at all. Here is a coupon to our store for "youtube15" it's for 15% off your first order. www.enkoproducts.com

@user-vq2bb6fb2m Жыл бұрын

WHAT A FUCKING G FOR THIS

@enko.labels Жыл бұрын

Thanks!

@charleskenney5174 9 ай бұрын

or you could have printed just a little "." so that you could roll the labels back up and use them

@Xmoo123 2 жыл бұрын

I cut off the RFID tag and just put it inside. Makes it a big easier. Now we need to find a way to read and write to the RFID tag.

@enko.labels 2 жыл бұрын

Keep us posted on that one, so far it sounds easier just to sell the printer and buy a 4 series.

@itsBlack 2 жыл бұрын

Thanks just did this now. Just started the business yesterday and bought bulk labels from amazon. I was PISSED when I found out about this. They work now 😂

@enko.labels 2 жыл бұрын

@@itsBlack how many have you printed with the used chip?

@itsBlack 2 жыл бұрын

@@enko.labels so far unlimited lol

@enko.labels 2 жыл бұрын

@@itsBlack so no point in finding a way to read and write to the RFID tag?

@kreaweb-be 2 жыл бұрын

At the end, when the label count hits zero, the printer renders de tag as useless. It will not be usable again.

@josep1717 Жыл бұрын

This is correct

@aeonjoey3d 11 ай бұрын

so no wonder the 5XL is only $89 on amazon right now, and the 4XL is $379. jeez. Thanks for this video!! sigh. its also no wonder these keep their resale value on ebay

@onepitorulethemall7257 11 ай бұрын

Was it on sale? The price is $179 now