How to | Rebuild | Dual Ball Bearing Turbo Charger | GT25R GT28R GT30R GT35R | Garrett
Рет қаралды 12,463
Күн бұрынwww.JDSTurbos.com
How to Rebuild Repair a Dual Ball Bearing Turbo Charger - off a Nissan SR20DET Motor/ Engine. Garrett GT2560R
I quit making these video a while back and finally got some time to load them all up on here for free for you guys/ladies!
I will be loading every DVD Video I have made, it will take some time to get them all loaded.
#ballbearing #rebuild #turbo
@johnolasau652 3 жыл бұрын
Fantastic video mate, thank you for sharing, this will help me a lot! Champion!
@802Garage Жыл бұрын
Hey great video! One of the few comprehensive ball bearing turbo guides on the internet.
@levelgx 4 жыл бұрын
Thanks for uploading these. I bought I few of your DVDs back in the day (rebuilding the sr and head).
@JDSPerformance25 4 жыл бұрын
Yes sir! Thanks for the support back then! Just trying to give back to the community 👍🏼
@patrickreynolds6290 2 жыл бұрын
Just bought a billet chra from you guys and was struggling like a MF to get the snap ring out of the housing adapter. Your little screw driver trick saved my life and it was out in like 30 seconds.
@garrettkoopman7458 4 жыл бұрын
I wish I would have bought your dvds back in the day. Lots of good info.
@JDSPerformance25 4 жыл бұрын
I made them so anyone could follow...they aren’t the best quality and not super entertaining but they are full of info 👍🏼
@davidcarroll1740 Жыл бұрын
Overnight soak with PB Blaster allowed me to remove 5 of the frozen turbine housing bolts. I snapped of the first one by not waiting for a soak and using the torch with PB, the overnight soak is important!
@yurykuzin2193 3 жыл бұрын
Thanks for interesting video and clear comments !
@JDSPerformance25 3 жыл бұрын
You’re welcome 👍🏻
@austinlorentzen8815 3 жыл бұрын
Great video! surprised there aren’t more views
@JDSPerformance25 3 жыл бұрын
Thanks!
@kevinkelly208 2 жыл бұрын
Hey, do you guys still offer these rebuild kits?
@Tune4Race 2 жыл бұрын
Hello! Nice video , you help me very much! I d like to ask you : The bare CHRA core of the GT3076 vs GT3071 are the same? I have a GT3076 with a damaged compressor wheel.. If i install a smaller GT3071 compressor wheel , will the GT3071 compressor aluminum housing fit the GT3076 CHRA?
@JDSPerformance25 2 жыл бұрын
Yes the core would be the same… just different wheels 👍🏻
@JDSPerformance25 2 жыл бұрын
No the 3071 compressor housing will not fit on the 3076. The wheels are different sizes.
@Tune4Race 2 жыл бұрын
@@JDSPerformance25 yes i know that the wheels are different , but if i remove the 3076 compressor wheel and i install a 3071 , i can use the 3071 housing! The question is , if the bare CHRA are the same..
@JDSPerformance25 2 жыл бұрын
@@Tune4Race OK yes you can 👍🏻
@Tune4Race 2 жыл бұрын
@@JDSPerformance25 thank you!
@davidvestgote7392 2 жыл бұрын
Perfect help! Just rebuilt a Gtx turbo, thanks to you it went smooth. But my turbo has an external oil restrictor as well. Is that really a good idea?
@JDSPerformance25 2 жыл бұрын
Yes a ball bearing turbo will usually need a restrictor 👍🏻
@davidvestgote7392 2 жыл бұрын
@@JDSPerformance25 Yes, thats what I been told. But I thought that was only if the turbo did not have an internal one. It seems odd having two inline restrictors? It seems Garrett would just install the correct size from the beginning...?
@JDSPerformance25 2 жыл бұрын
The internal one is not a restrictor in the way you are thinking. An external one is still needed. 👍🏻
@KiG1208 3 жыл бұрын
Do you do rebuilds on journal bearing turbochargers as well?
@JDSPerformance25 3 жыл бұрын
Yes I sure can 👍🏻
@parkd240 3 жыл бұрын
so what’s stopping me from putting the gt2560r compressor housing and wheel onto my gt2554r turbine side? i am getting a free 2560 snd it has a busted turbine. i have 3 t25’s and was searching to see if i can just do this or that^ to fix it. possible at all?
@JDSPerformance25 3 жыл бұрын
The compressor wheel is bigger on the 2560
@briarproctor3461 3 жыл бұрын
Where do you recommend having them balanced? And or does you rebuild cartridges come already balanced?
@JDSPerformance25 3 жыл бұрын
You will have to get the full cartridge balanced and I am not sure who does it for the public anymore.
@blackdogprospectingwelding7341 4 ай бұрын
Do you have ball bearing rebuild kits for gtb2060vlkr turbos?
@JDSPerformance25 2 ай бұрын
No sorry
@tomr1107 2 жыл бұрын
if you heat heat the compressor wheel it will pop right off.
@chaosmaxtcg 2 жыл бұрын
I broke a stud on my s15 turbo housing so had to take my manifold and turbo apart to put it on the drill press ive whacked the housing several times and soaked it in penetrating oil but that shit does not budge i really didn't think id have to heat it up so at this point im hoping i didn't fudge anything up
@chaosmaxtcg 2 жыл бұрын
Kinda sounds like its touching something as it spins but it still spins pretty easily and freely but its got a slight grinding sound i guess ill find out if its fd up when I re install everything 😆
@JDSPerformance25 2 жыл бұрын
Sounds like you have one that got way too hot and pretty much welded itself together…I wouldn’t take the risk of running it…it could end up damaging your engine!!!
@chaosmaxtcg 2 жыл бұрын
@@JDSPerformance25 the fan blades? Hmmmmmmm
@JDSPerformance25 2 жыл бұрын
You said you couldn’t get the housing off…
@chaosmaxtcg 2 жыл бұрын
I didn't heat anything up yet i just whacked the housing with a hammer but ive had an exhaust leak on the elbow where my stud broke and a missing nut on my exhaust manifold maybe that heated it up to much?
@briarproctor3461 3 жыл бұрын
I am interested in buying either a complete cartridge or a rebuild kit from you. Is there anyway I can contact you. I couldn’t find a phone number on your website.
@JDSPerformance25 3 жыл бұрын
jdsturbos.com
Stapleton42
Рет қаралды 153 М.
超人夫妇
Рет қаралды 33 МЛН
Gufee.medalin
Рет қаралды 9 МЛН
Mechanical Skills
Рет қаралды 1,5 МЛН
The Average Garage
Рет қаралды 12 М.
vazovskie.official
Рет қаралды 675 М.
Roud Offthegun
Рет қаралды 750 М.