How To Refinish A Bathtub In 2021 | Live Demonstration With Ekopel 2K

How To Refinish A Bathtub In 2021 | Live Demonstration With Ekopel 2K | Refinished Bath Solutions

Рет қаралды 27,762

3 жыл бұрын

How To Refinish A Bathtub In 2021 | Live Demonstration With Ekopel 2K | Refinished Bath Solutions
How to Refinish a bathtub with Ekopel 2K. This was done live and unedited. Here is how to recast your tub using Ekopel 2K Bathtub Refinishing Kit in 2021.
For further information or to order yours call: 877-882-2278
Or visit our website:refinishedbathsolutions.com
The best refinishing kit Available Now: www.amazon.com/Ekopel-Bathtub...
Every step of the process to refinish your tub with Ekopel 2K is shown and explained.
REMODEL IT YOURSELF: No need to hire a spendy expert. This refinishing kit takes the expense out of bathtub improvement. Perfect for renters, apartment dwellers, and residential or commercial tubs, sinks, and showers.
ECO-FRIENDLY & NON-TOXIC: Fumes-free and made without harmful chemicals, Ekopel’s long-lasting, oil-free glaze never peels! Its thick, full-seal coating restores tub surfaces to a “like new” bright gloss.
STEP-BY-STEP DEMO VIDEOS: Free videos take the mystery out of re-glazing. We guide you through the prep, application, and finishing steps. If you can follow instructions, you can DIY recast your tub in 2 to 4 hours.
KIT CONTAINS EVERY TOOL YOU NEED: Our tub & sink remodeling kits include foam roller with covers, scooper boxes, and easy-pouring, safe-to-use Ekopel 2K enamel.
24-HOUR CURE TIME: After applying Ekopel, it takes 24 hours to “set” before using your tub/shower. Maintain 72 degrees Fahrenheit in the bathroom for the shortest cure. In lower temps, it will take longer to set.
Order yours today at bathepoxy.com Use coupon code youtube10 for $10 off at checkout.
EKopel 2k is the premier bathtub refinishing kit. We provide top-notch customer service and the longest-lasting bathtub kit on the market.
#ekopel #sinkrefinishing #homeimprovement #bathtubrefinishing #bathtub #ekopel2k

Пікірлер: 129

@mrk8546 6 ай бұрын

Just did my fist tub. It went relatively well. The tub I was working on was older style and had a very curvy face and it was a challenge to spread the product evenly over these areas. The drain is in fact the hardest part ..as mentioned in the video. I think making some sort of plug system would be in the best interest of the manufacturer. Maybe something that threads onto the existing drain pipe.?? I removed the drain cover and made 3 levels of protection and it turned out really well. My plumber friend came and checked it out and was pretty blown away by the results. The material flowed right to the tile line...almost needs no caulking and looks smooth like glass. We added a new overflow cover and drain cover and it looks brand new. This video was playing as i worked (in real time) and it was perfect. Thank you for posting and promoting this great product.

@victoria77728 2 жыл бұрын

Thank you so much for the great demonstration. Greatly appreciated.

@kellynm 2 жыл бұрын

I did this project this past weekend... great results! Watch this video several times, get a good understanding of what to do and it really is straight forward AND the results are fantastic! I would buy this product again when I do another tub. Great video and great product!

@sonyakittles7882 2 жыл бұрын

Thank you for this detailed video!

@gregreed986 2 жыл бұрын

I did my first one the other day and I can't believe it came out that good. Looks new!

@markelkhill4093 Жыл бұрын

We just finally poured our first tub and this vid o was super helpful! We purchased the product about a year and a half ago and we had no issues with it’s age. It performed as promised. We will be sharing this great product with our other investor and contractor friends! Thanks guys for all the hard work to produce such a good product and we’re glad to hear that it will be being produced in the US soon! 🇺🇸 USA strong!!

@JoeCamel-fn7dl Жыл бұрын

What about the quantity of Epogel 2K kit. I received gloss white for $150.00 which is less than one gallon. I am assuming it must be 1/2 gallon, however, the measurement is not listed. Can I be certain this kit will cover a cast iron tub 57.5Lx30”Wx16” deep?

@Sixxdee9 3 жыл бұрын

I bought the kit….I keep watching how to videos so I get it right the first time lol

@michaelpetrella1513 3 жыл бұрын

i just bought the kit and will be doing my cast iron tub in next 10 days

@crystalcopeland5554 Жыл бұрын

Just did this today with this video along side me. Thank you for the live time it was super helpful and like I had someone guiding me along the way. My heart only pounded when I first poured!

@lallu316 3 жыл бұрын

Like a few others have said, I'm working up the courage (lol). Got it in my cart, on Amazon, right now. I love thhose longform video, to see it from beginning to end. Helps me realize that I can also do it. Thank you very much, for making this.

@jakepeters760 Жыл бұрын

I did this yesterday and it turned out horrible, lots of run marks and I did everything like they said. I would not recommend this product.

@cherylriverside355 3 жыл бұрын

THANK YOU!! I’m ordering a kit next week after a year of trying to build up my courage. This video makes the process seem a lot less scary. The last time I had my tub refinished, it was $700. That was almost 10 years ago so I’m sure it would be at least $1,000 now. I contacted your customer service to find out what you recommend for stripping off the old refinishing. They said Citrustrip and it’s done a great job of removing the old finish without a lot of work.

@doublecross1079 Жыл бұрын

I am going to visit your site and order kits to regrade my tub and tile, and my kitchen counters!

@diannajaquin500 2 жыл бұрын

I have watched several videos. This one I like the best. I am going to recast my bathtub today. I am a little nervous because it is for a house that I am selling but after this video I feel confident.

@stevenocchionero5262 Жыл бұрын

thank you excellent vedio

@davehiser1002 Жыл бұрын

Great video, even better is the product. Do your prep work first, then follow the video as you go. My 23 year old tub looks brand spanking new. Time to think about doing my shower.

@gaylejohnson7895 2 жыл бұрын

Watching now to apply later today. Using white but my tub is almond. I’d like to do mine too. Doing both kids runs from 1950’s and 60’s tubs. Had to strip first from brush on epoxy that peeled in both.

@Turtles1-800 4 ай бұрын

Beautifully done! Been researching a lot lately and time after time your product seems to be the leading competition. Your instructional videos are amazing, very great job explaining in detail. We just bought our first house and I hate the beige shower stall we have.. I really would love to have a white refinished shower stall 😉🙏🏼👍🏼

@ernieallison3141 2 жыл бұрын

Funny you should mention black tint. I just covered the black to brighten up the bathroom. I am doing a drop in corner jetted tub. Just finished and looking good. I will wait until its dry before removing my tape on the jets, drain, etc. It did take nearly 2 kits to do this tub though. I still have to do the large corner shower. Hopefully it goes well. I do love the non toxic aspect as we have 5 dogs. Hopefully you can do a demo on some non standard units like I am doing. I think some people less brave or handy than me would love to see that.

@sarahblue1914 3 жыл бұрын

I am working up my courage, I think I can do this. 😁

@kevinsmith-hs9jo Жыл бұрын

Candy apple 🍎 red I'll be using this product this week

@derrickhog25 2 жыл бұрын

As well as that black would be awesome

@TRAXRIPPER 2 жыл бұрын

I just watched the other video then seen this was 9 months ago and I was like I gotta see if anything changed and here I am! lol

@DG-fe4ht Жыл бұрын

I’m planning to use a manual suction thingy like for heavy gear oil extraction to pull the excess from the drain instead of relying on scooping out. Thoughts?

@rebeccam8476 2 жыл бұрын

We have an older home with a very ugly turquoise bathtub 🛁 I love your videos best because you are thorough and show exactly how the process works and what to expect. I'm going to do this 😊 I'm scared but gaining confidence as I watch more and more of your videos. Thanks so much!!! (Maybe I'll send a couple pictures once I get this done.) Thanks again!

@RefinishedBathSolutions 2 жыл бұрын

Feel free to share any before and after photos with sspooner@refinishedbathsolutions.com you can also ask any questions to this email as well!

@sheliateel3227 Жыл бұрын

I’m going to be doing this soon 😅

@karenh2998 Жыл бұрын

Hi Guys .. I am loving your Channel' it's is very informative And I also glad it's odor free that's a plus.. hut I have a question is one kit can do for the wall and tub. My bathroom has tiles All around it .. outside of the tub wall is half Tile. It Goes All around the toilet and sink . And the worse part is It's green..( FYI) I am a renter

@RefinishedBathSolutions Жыл бұрын

I would recommend our 2 pk kit for that 1 gallon for the tub and 1 gallon for the walls. Ekopel should be able to cover that color with one coat if applied properly

@patrickthy7007 3 жыл бұрын

Thank you for the great video. Received you product from Amazon this past weekend and will be attempting this tomorrow. I have a basement underneath and open access to the tub's plumbing, so I'll be removing the drain. My plan was to cover the drain hole with a small plastic cup, leave the cup in place till I am done scooping most of the product from the tub, remove cup and let the product drain through the whole into a bucket below. I'm assuming this should leave and even layer around the drain hole. This sound about right? Thanks again for the video. If this works out well I'll be doing a few sinks next.

@RefinishedBathSolutions 3 жыл бұрын

I would recommend leaving the tape on then babysit it and keep wiping excess material away like the directions state if you do it this way you could end up with a mess

@patrickthy7007 3 жыл бұрын

@@RefinishedBathSolutions Thank you for the reply. That's how I did it, scooping out the taped-off drain. Besides a few runs, I'm very happy with the quality of the finish. Will be doing the bathroom sink next!

@JoeCamel-fn7dl Жыл бұрын

Should small nicks (1/16" or less deep) in the old finish be filled prior to pouring the Ekopel, or will they be leveled as well?

@stevesworld9680 2 жыл бұрын

I bought the ekopel 2 part in u.s. I have a few spots that are peeling from a bad contractor job using the smelly stuff. Will clean and lightly sand. Will use this process to hopefully repair area that is peeling. Thanks for the great video.

@ChiapasPioneer 2 ай бұрын

. . . when you scooped out the drain, and then used a towel to wipe, your shoulder blocked your technique . . . really appreicate your continued narrative during this whole project, good presentation and "you've got buffed shoulders too" . . . grins

@RefinishedBathSolutions 2 ай бұрын

Thank you for your comment! We appreciate it. More videos coming soon!

@scottpusch6249 2 жыл бұрын

In my 20 years of painting you might want to make a full color collection i have almost seen it all

@sidnegeorge2272 Жыл бұрын

I ordered a kit and am doing this tomorrow. I'm a bit worried because your demo is on a new tub. Mine will need to cover a lot of imperfections on an old sanded tub. Will it work well?

@brunobeauregard6095 Жыл бұрын

My tub has a few significant overhanging sections. Will the product flow properly on such sections, or will it create drops want to sag from the gravity?

@JoeCamel-fn7dl Жыл бұрын

What is the best way to seal the drain hole (so that Ekopel does not seep in past the drain level), when the drain is removed prior to refinishing?🤔

@carlpetree6638 8 ай бұрын

Very interesting. Can you change colors from harvest gold to white?

@RefinishedBathSolutions 8 ай бұрын

Yes absolutely

@JR-rv4xl 2 жыл бұрын

Does this help with hard water spots that keep reappearing after cleaning the tub (cast iron tub)? We definitely need this

@RefinishedBathSolutions 2 жыл бұрын

It will cover hard water spots up but if hard water is an issue that would need to be fixed or it can keep occurring overtime.

@Turtles1-800 4 ай бұрын

I wonder if you can put a little Dixie cup right in the drain, maybe tape the edges down and let it fill up?

@derrickhog25 2 жыл бұрын

Sky blue would be real nice

@bigbacon3984 2 жыл бұрын

If Curing time depends on the tempature would more heat speed curing time? I live in Florida so heats not a problem. But AC is some times.

@RefinishedBathSolutions 2 жыл бұрын

Yes, heat can speed up the curing process.

@bigbacon3984 2 жыл бұрын

@@RefinishedBathSolutions, Thanks y'all have a great weekend.

@DavidYates-td6qr Жыл бұрын

How do you prepare a old tub that has stains and where the bottom of the tub is ruff to the touch. I think it has been resurfaced before.

@laurasaylor6892 11 ай бұрын

How long does it take to fully dry? Also I have an all metal tub from 1955 and it has an overflow hole that has a big turn knob ! How do you take that off to glaze behind it?

@RefinishedBathSolutions 10 ай бұрын

Hi Laura it typically takes around 24 - 36 hours for it to dry fully! It can take up to 30 days to cure however that does not affect when you can use the surface, you are able to use it once it is fully dry! As for taking your overflow cover off does it pull off or have a screw at the bottom of it?

@tomoleary1367 Жыл бұрын

i have a tough to describe Q. can you define 'excess' as in the excess product on the bottom of the tub. im about to do this for the first time and im very concerned about how much it too much AND too little product on the bottom of the tub. if you have too much (even a little too much) on the bottom, wont that mess up the bottom? How much do you scoop up and how much do you leave on the bottom? thanks for any help you can provide

@RefinishedBathSolutions Жыл бұрын

Typically you can see where it's pooled and can scoop that excess out. But if you were to leave it and not remove any excess then when its fully dry and hardened you could sand and buff it how you want.

@eduardoc4785 2 ай бұрын

Can you put the anti slip product on top of the Ekopel finishing? Do i need to sand it before I apply the anti slip or just put it right on?

@RefinishedBathSolutions 2 ай бұрын

Yes! You can put it right on top of the ekopel finish, there is no need to sand before applying it. If you have any questions give us a call 877-882-2278!

@AndriusPopovas 2 жыл бұрын

If my cast iron bathtub is not installed (currently standing in a garage), can I just leave the drain hole open and put some sort of a container underneath to collect all the material, that is drained? Or is it still better to tape things?

@RefinishedBathSolutions 2 жыл бұрын

Yes, if the tub is uninstalled thats the easiest way to do it!

@jonathanlapointe6325 Жыл бұрын

How do you polish this material? I have a scratch. How do you avoid/fix any paint nipples?

@backyardinventor9580 3 жыл бұрын

I have drain removed, so how do you recommend taping it off ? I can get to the bottom side of the tube.

@RefinishedBathSolutions 3 жыл бұрын

You can tape the drain and make a tape dam so half tape in air half tape flat on bottom this will prevent material from getting into drain.

@rayfrye1335 Жыл бұрын

Find a paper cup that fits the hole. Remove before completely drying

@dianeosgood2295 2 жыл бұрын

Do I need to fill chips before I use this kit if so what do I use . Thank you

@RefinishedBathSolutions 2 жыл бұрын

yes fill any cracks, chips, holes, dents, or pitted areas with car bondo

@tuffybaxton6162 2 жыл бұрын

after cleaning the tub, is it okay to use rubbing alcohol to dry up the water splotches? If so, is it okay to use the winter green rubbing alcohol? how long with a hair dryer? I don't have a heat gun.

@RefinishedBathSolutions 2 жыл бұрын

yes that would be fine to do. And just until its dry.

@Bridget82267 Жыл бұрын

I don't think you would want to use the green one... I think it has stuff in it that might not make the product stick... just use the regular

@rayfrye1335 Жыл бұрын

Use acetone.. drys better and evaporates more completely

@Bridget82267 Жыл бұрын

do I have to pour it.. or can I use the roller and just roll it on, out of a paint tray?

@RefinishedBathSolutions Жыл бұрын

ekopel has to be poured on or it would be applied too thin and cause yellowing and streaking

@rayfrye1335 Жыл бұрын

It would also lift while rolling and trap air bubbles that will cause tiny air pockets called bubbles and they love to peel

@cindiqq2292 2 жыл бұрын

How does Ekopel 2K compare to Rustloeum? Ekopel is a German product? Ekopel is not that much more expensive than Rustloeom, I want something that will last forever and not peel. Thank you.

@RefinishedBathSolutions 2 жыл бұрын

Ekopel is much thicker than Rustloeom it dries about an 8th of an inch thick, and is like cement. With all the proper prep ekopel will last 20 years no peels. It's also completely odorless, non toxic, pet safe and eco friendly. Ekopel is like a bathtub in a can. If you want a product that's actually going to last you I would recommend Ekopel 2K!!

@graciefernandez6336 Жыл бұрын

can I use a hair dryer to help with bubbles?

@RefinishedBathSolutions Жыл бұрын

YES!!! We recommend a hair dryer or heat gun after you pour to pop all bubbles.

@joshea87 2 жыл бұрын

Do you recommend a product to clean the tub after daily use?

@RefinishedBathSolutions 2 жыл бұрын

We recommend scrubbing bubbles to clean, nothing with bleach, and nothing too abrasive.

@lindaphillips4260 Жыл бұрын

I wish you had shown how to remove the tape at the floor. I am afraid I will end up pulling the new finish off. My plan is to cut it with a utility knife at the edge?

@paulcarestia3181 5 ай бұрын

I have a fiberglass tub. Will this product work over fiber glass? Can I still use the Lysol product to clean the surface before applying Ekopel 2K?

@RefinishedBathSolutions 5 ай бұрын

Hello, Yes this product will work over the fiberglass material in general, however for surrounds we no longer recommend our pour on kits as the application is too difficult. For the tub, shower pan, sinks projects like this, the product is still perfect but for vertical surfaces we recommend our roll on product. Our roll on product is a much more user friendly application, being a directly rollable, 2 coat application and it is able to be applied on the tub as well if preferred. So in short yes, it will work on fiberglass material however for the surround, I would recommend our roll on two coat kit. If you have any more questions please give us a call at 877-882-2278.

@paulcarestia3181 5 ай бұрын

@@RefinishedBathSolutions Can I use the Lysol Power Toilet Cleaner you recommend on a fiber glass tub to clean it?

@flacoblb Жыл бұрын

IS THE DRAIN EASY TO REMOVE AFTER IT CURED

@4637bigred 6 ай бұрын

I am planning on doing this. I won't have a drain in my tub when I do it. I don't want so much product at the drain hole. How do I regulate that ?

@RefinishedBathSolutions 6 ай бұрын

i would tape off the drain hole where you don’t want product. If you have any more questions reach out to us at 877-882-2278.

@kaylynnfox 2 жыл бұрын

Is there a claw foot tub video full length?

@rayfrye1335 Жыл бұрын

Here's one I did facebook.com/111748220729573/posts/pfbid02Q1EwZihESk6zAdw356ZkCcmgKf6EgLQ4BBAE7j6F37W7zDEEAAp32HBLptrobdVXl/

@saradreyer9090 Жыл бұрын

I’d like a video of an older cast iron claw foot tub too. And a video of the prepping process on a well used tub or sink.

@ignitehemi3364 Жыл бұрын

Does this product yellow over time?

@scottosborne4332 2 жыл бұрын

Will this work on a ABS plastic garden tub

@RefinishedBathSolutions 2 жыл бұрын

yes it will just make sure there is no flex, if there is a flex that would need to be fixed first.

@rayfrye1335 Жыл бұрын

If it dosent have flex then how does it hold up to dropping heavy shampoo bottles and kids banging on it with plastic toys. The thickness with lack of bonding agent has got to be problematic. When Acrylic Urethane dries its like rubber and flexes. All fiberglass tubs and shower pans flex some.. have you ever tried it with a bonding agent? It would probably effect the flow-out

@kevinurquiza4128 5 ай бұрын

Do I have to sand tub if it’s been painted before? Wanting to do this project tomorrow if anyone know please help

@RefinishedBathSolutions 5 ай бұрын

yes sanding is always recommended sand till you have a flat and smooth yet rough surface

@beckyforsberg1798 2 жыл бұрын

What do you use to remove old paint from the bathtub?

@RefinishedBathSolutions 2 жыл бұрын

peel up what you can then sand the rest smooth. Then etch and deep clean with Lyol Power. No need to strip the whole thing.

@rayfrye1335 Жыл бұрын

If it's steel use a larger razor scraper and 40-60 grit. A 5-in-1 works good around the edges and back. Remove it all. This material and many others will make bottom layer lift during the drying process as it's catalyst active and generates heat. Not sure how the longevity will be with this product. They don't use a bonding agent between the gelcoat and their product. The epoxy will stick to gelcoat if sanded well, however, a steel tub with porcelain will be a different story. Porcelain is not pores and dosent sand well. I'm assuming that they don't use a bonding agent so they can sell to the public as the bonding agent isn't offered for public sell and must be handled carefully to prevent injury. A trade off that could definitely effect the durability and duration of service

@tamimamini 5 ай бұрын

Hello. I followed the instructions and let the bathtub dry for 72 hours before using it. I see now glaze has disappeared in one part of the tub and a sticky scar is there. Any thoughts and recommendations?

@RefinishedBathSolutions 5 ай бұрын

Hello, It can take up to 15 days for the tub to actually cure, this doesn't mean the tub cant be used but it needs to be used with caution. I am not sure what you mean when you say a stick scar, but I am assuming you are referring to the material being tacky, this will happen if not all part B is mixed in properly. If you have any more questions please feel free to call us at 877-TUB-CAST.

@tamimamini 5 ай бұрын

@@RefinishedBathSolutions thank you. I mean the tub has a slight deep scratch in that same spot which is still sticky, leaving a rough surface about 3-4 inches. Shall I leave it to dry regardless of the rough surface?

@danielrandolph4893 2 жыл бұрын

Where can you buy this product

@RefinishedBathSolutions 2 жыл бұрын

You can get from amazon or us directly. Here is sour direct link: refinishedbathsolutions.com/collections/all-products

@skippyjammers2747 Жыл бұрын

About a year after using ekopel refinish, a light brown streak has emerged down the middle of the tub.. any suggestions on how to cover or remove this streak?

@skippyjammers2747 Жыл бұрын

UPDATE: In fact it was a (Lysol) disinfectant spray I had used for a couple months. It coated the surface.. and then slowly streamed toward the drain when wet from use of the shower. But a residue would build up on the floor of the tub, in a streaming fashion. I eventually figured it out and began to only used bleach based cleaner.. then over several cleanings.. it was gone.

@ewadziatkowska1059 11 ай бұрын

@@skippyjammers2747well done you

@nannette994 4 ай бұрын

Note that the distributor, including in its response comments for this video above, explicitly stated that bleach should never be used on the refinished bathtub. Scrubbing Bubbles was recommended. @@skippyjammers2747

@justhim8745 Жыл бұрын

I also want to do the tile above the tub. Could u recommend steps to apply the coating. Would 1 kit be enough? Or 2

@MultiShoegal 2 жыл бұрын

Can you Glaze a beige tub white?

@RefinishedBathSolutions 2 жыл бұрын

yes, ekopel can cover up any pre existing color or stain with just 1 coat.

@rayfrye1335 Жыл бұрын

1 pour. Is a pour technically a coat. Application. That's the word I was looking for.. 1 Application. I should have wore my respirator while applying it😁

@danschenck9442 Жыл бұрын

What gritt sand papper sand tub with?

@rayfrye1335 Жыл бұрын

40 to 60 for a steel tub w/ porcelain and 220 for fiberglass.. just enough to scuff it up.. not to the fiberglass

@RefinishedBathSolutions Жыл бұрын

we recommend 220-320 grit sandpaper

@derrickhog25 2 жыл бұрын

How much does this material cost

@RefinishedBathSolutions 2 жыл бұрын

Currently for our standard bathtub kit it cost $149.95 as of 2/28/22

@DeniseBoatright 9 күн бұрын

What is the prep for used tubs? I've only seen you use new tubs. New tubs shouldn't need to be resurfaced

@RefinishedBathSolutions 4 күн бұрын

We often demonstrate on new tubs however we do have videos of prep on our channel. The prep for all refinishing with Ekopel is the same and is demonstrated well in the Roll On video. You can always go to our website refinishedbathsolutions.com to check out the FAQ section. You will find the answer to this and many other questions there. Happy refinishing!

@elektrikman34 Жыл бұрын

How long until totally cured?

@RefinishedBathSolutions Жыл бұрын

24-36 hours for it to be completely dry and hardened but it can take up to 30 days to cure. You can still use this while it cures the cure time is different from the dry time.

@Z-Ack 2 жыл бұрын

Primer?

@RefinishedBathSolutions 2 жыл бұрын

primer isn't a have to I recommend it for bad rust spots or places fixed with bondo

@Bridget82267 Жыл бұрын

@@RefinishedBathSolutions what kind of primer

@rayfrye1335 Жыл бұрын

Primer. With this stuff by a spray on oil base primer like Kilz. Red and white can. Oh yea... always sand rust down to good metal. Rust dosent stop on its own..

@jacksonfive1978 2 жыл бұрын

Why not just stuff the drain with paper before you tap it ?

@RefinishedBathSolutions 2 жыл бұрын

the material would get in and can dry like cement so it would clog the drain. If its clogs your strain you would have tp call a plumber to remove the pipes.

@johnetheriedge8675 Жыл бұрын

Do you honestly think anyone can tell what you are doing with the holes?

@myopicseer 3 жыл бұрын

Taking phone calls and texts during an instructional video, and not editing it out, is really inconsiderate of the time of your viewers. Think of the 7,000 views x the 60 to 90 secs of wasted time each. Edit the video.

@RefinishedBathSolutions 3 жыл бұрын

This is a live video. Made to show everything completely unedited as the title says. This shows true time and everything uncut. We have plenty of edited videos that show the process faster. This video is made for customers that don’t believe the time or effort involved in the process.

@Bridget82267 Жыл бұрын

@@RefinishedBathSolutions if they are really worried about that what 60 seconds.... geeezzzzz.... go watch something else....lol