No video

How to Relocate Your Spring Perches

  Рет қаралды 5,042

The BFH Garage

The BFH Garage

Күн бұрын

This is a quick video on how to relocate your spring perches.
Disclaimer: The following disclaimer applies to The BFH Garage KZfaq channel (referred to as "the Channel"). By accessing or using the Channel, you acknowledge and agree to the terms and conditions of this disclaimer. If you do not agree with these terms, please refrain from accessing or viewing the Channel.
Content: The Channel provides automotive-related content, including but not limited to repair guides, maintenance tips, product reviews, and general information. The information presented on the Channel is based on the personal opinions and experiences of the Channel's creator and contributors. However, the Channel makes no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the information, products, or services mentioned. The content is provided for informational and entertainment purposes only and should not be considered professional advice.
Personal Responsibility: The Channel encourages responsible automotive practices. However, any actions or decisions you take based on the information provided on the Channel are solely your responsibility. The Channel cannot be held liable for any damages, injuries, or losses that may occur as a result of following or implementing any information or advice presented on the Channel. Always exercise caution, consult professionals, and adhere to safety guidelines when working on or modifying vehicles.
Third-Party Content and Links: The Channel may include links to third-party websites, products, or services. These links are provided for convenience and informational purposes only. The Channel does not endorse or have control over the content, products, or services offered by third parties. Accessing or using third-party content is at your own risk, and the Channel shall not be responsible for any damages, losses, or issues arising from such content.
Intellectual Property: All intellectual property rights, including copyrights, trademarks, and any other proprietary rights, in and to the Channel's content (including videos, images, graphics, logos, and text) are owned by or licensed to the Channel. You may not reproduce, distribute, modify, display, perform, or otherwise use any content from the Channel without obtaining prior written consent from the Channel.
Changes to the Disclaimer: The Channel reserves the right to modify, update, or change this disclaimer at any time without prior notice. It is your responsibility to review this disclaimer periodically for any changes. Your continued use of the Channel after modifications to this disclaimer will constitute your acknowledgment and acceptance of the modified terms.
Governing Law: This disclaimer shall be governed by and construed in accordance with the laws of the jurisdiction in which the Channel operates. Any disputes arising out of or in connection with this disclaimer shall be subject to the exclusive jurisdiction of the courts in that jurisdiction.
If you have any questions or concerns regarding this disclaimer, please contact us through the appropriate channels provided on the Channel.
Last updated: May 11, 2023

Пікірлер: 23
@paulkaufman4901
@paulkaufman4901 Жыл бұрын
Thanks So Much for doing this! Your video gave me the confidence to do this to my 2003 Rubicon. My springs were so bent that they just didn't work well. In fact, I put brand new Fox shocks on and they didn't last 1,000 miles. My Jeep handled like a boat with the bent springs and now it is Very Solid! Straight springs and new shocks make my jeep corner like it's on rails! No more worries about being off camber. One issue I had with my project was brake lines. My brake line was bent in such a way that it was wedged between the relocated perch and the frame. I wish I had straightened out those bends before I welded the driver side perch back on. That would have made the work so much easier!
@rowlinstoned3715
@rowlinstoned3715 Жыл бұрын
Man i really like that better than the spring correctors on bottom plus i have to replace my fuel tank anyway so perfect time to do the springs. Great video man.
@JedGrant6
@JedGrant6 Жыл бұрын
Great video, I had never thought about rotating the top mount. I considered cutting everything off the axle and rotating the mounts/lower bucket, but this makes so much more sense. I'll be tackling this next summer!
@Bighorn_Rockcrawling
@Bighorn_Rockcrawling 2 жыл бұрын
I actually did the same thing but I did swap mine side to side AND rotated the perches 180 that way they still sat on the side of the frame their suppose to. I also moved my track bar bracket back as well. Was able to push my axle back another two inches after doing this. Good video
@TheBFHGarage
@TheBFHGarage 2 жыл бұрын
There is no way I could push my axle back a 1/8" let alone 2". Mine rubbed against the gas tank skid as it was. You could swap the perches I suppose, but trimming them is just as easy.
@timhorne8126
@timhorne8126 2 жыл бұрын
About her great video. Thanks again.
@billymills7944
@billymills7944 2 жыл бұрын
thanks Mike yet another project I should have done...lol
@poker8193
@poker8193 Жыл бұрын
If you stretch the wheelbase will those work even farther back ?
@TheBFHGarage
@TheBFHGarage Жыл бұрын
Depends on HOW you stretch your wheelbase.
@poker8193
@poker8193 Жыл бұрын
@@TheBFHGarage 6” strtch long arm triangulated 4 link is the plan don’t really want to go coil overs cuz I’m on a budget
@TheBFHGarage
@TheBFHGarage Жыл бұрын
@@poker8193 still depends how you do your stretch.
@gtowncasey111
@gtowncasey111 2 жыл бұрын
Would you sell the perches you cut off and didn’t use?
@TheBFHGarage
@TheBFHGarage 2 жыл бұрын
Looking at them, they were in as of good of shape as my others lol. Are you in Colorado?
@gtowncasey111
@gtowncasey111 2 жыл бұрын
@@TheBFHGarage lol!! No sir I’m in Texas. I would pay to ship if you can part with them. I did my relocation a couple years ago and butchered them and would like another try at it.
@TheBFHGarage
@TheBFHGarage 2 жыл бұрын
@@gtowncasey111 email me
@gtowncasey111
@gtowncasey111 2 жыл бұрын
@@TheBFHGarage done
@mattlinderkamp9489
@mattlinderkamp9489 2 жыл бұрын
No reason to move the top mount unless stretching wheelbase, rotate the axle mount.
@TheBFHGarage
@TheBFHGarage 2 жыл бұрын
Moving the lower mount by itself isn't enough. I relocated all my brackets on my Dana 44 (rotated pinion). By doing both uppers and lowers you can get close to parallel at full bump. Most people don't want to do all the work for axle bracket relocation.
@MrEjablee25
@MrEjablee25 2 жыл бұрын
If you’re willing to take the time to do this, why not just put coil-overs on. It’s time!!
@TheBFHGarage
@TheBFHGarage 2 жыл бұрын
I get a lot of "tons and 40's" or "coilovers" comments. It's not needed for what I do. I LOVE the challenge of 35's on the rocks. That's my thing.
@MrEjablee25
@MrEjablee25 2 жыл бұрын
@@TheBFHGarage I think 35’s are fantastic. No one’s asking you to dump cash into tons or 40’s. Simply, if you’re willing to do the work involved to move your springs back for little to no performance enhancement, why not do coils? Not that much more work and would be fun on 35’s. Plus you’d make a kick ass informative video about it. Cheers
@nickfountain8420
@nickfountain8420 2 жыл бұрын
To me the simple answer would be money. He seems to enjoy working on his jeep, which I do also myself. He already has all the parts to do the relocation. Here in Bama picking up a pair of 12" travel coilovers is between $1,000-$1,200. That's just for the coilovers. So far most of what I"ve seen him do is stuff that's been on the forums. Which I'm enjoying watching.
How to Outboard Rear Shocks
40:41
The BFH Garage
Рет қаралды 9 М.
How to Relocate Spring Perches
13:15
martinbuilt
Рет қаралды 25 М.
wow so cute 🥰
00:20
dednahype
Рет қаралды 29 МЛН
The Joker saves Harley Quinn from drowning!#joker  #shorts
00:34
Untitled Joker
Рет қаралды 72 МЛН
Prank vs Prank #shorts
00:28
Mr DegrEE
Рет қаралды 9 МЛН
这三姐弟太会藏了!#小丑#天使#路飞#家庭#搞笑
00:24
家庭搞笑日记
Рет қаралды 48 МЛН
How to Replace Drum Brakes on a Jeep Wrangler
20:41
The BFH Garage
Рет қаралды 92 М.
How To Replace Frame Rail Nutserts
13:26
The BFH Garage
Рет қаралды 17 М.
How to do a Tie Rod Flip on a Jeep Wrangler
16:26
The BFH Garage
Рет қаралды 3,9 М.
The Jeep Wrangler TJ Has A Major Suspension Flaw, Let’s Fix it!!
14:24
Jeep Gear & Gadgets
Рет қаралды 44 М.
Roller Spring Perches For Classic Ford Mustang Cougar Fairlane Falcon Episode 210 Autorestomod
22:03
Autorestomod Manic Mechanic Gasoline Media
Рет қаралды 38 М.
DIY Winch Safety Thimble Dock
17:53
The BFH Garage
Рет қаралды 871
All New Battery Cables from jeepcables.com
13:12
The BFH Garage
Рет қаралды 7 М.
How to Raise the Rear Frame Rail to Eliminate the Body Lift Gap
10:49
Relocating TJ Rubicon Locker Pumps
24:45
DKs Garage
Рет қаралды 7 М.
Is This Saginaw Steering Gear Any Good?
12:24
The BFH Garage
Рет қаралды 537
wow so cute 🥰
00:20
dednahype
Рет қаралды 29 МЛН