How to remove a rusty stuck Wheel Bearing Hub Assembly. EASY! No sledgehammer required!

Рет қаралды 629,453

3 жыл бұрын

In this video, I show you how easily remove a stuck, rusty, frozen axle wheel bearing hub assembly, easily, with a couple nuts and bolts. I have battled wheel bearings many times, nearly loosing hope, but this easy method works great! No sledge hammer required.
This is specifically being shown on a 2014 Chevy Impala, but the procedure is the same for many makes and models.
I walk you through the whole procedure, step by step. Lets remove a wheel bearing!
-----------------------------------
How-to and Reviews provides product review videos and how-to videos for a variety of unique and common products and applications. Save some money and do it yourself, and be informed about products.
If you find the content interesting, Subscribe so you don't miss future videos. A new video is posted at least once a week.
Subscribe to How-to and Reviews: / @howtoandreviewsofficial
-----------------------------------
#impala #wheelbearing #removal
-----------------------------------
How-to and Reviews

Пікірлер: 645

@dustinsavage204 2 жыл бұрын

Literally just spent about 8 hours trying a 3lb sledge, air hammer, crow bar, and heat gun trying to get a seized hub off my 08 silverado. Found 2 bolts, washers, and nuts, used old sockets for spacers, less than an hour later, new hub is in and everything is back together!!

@HowtoandReviewsOfficial 2 жыл бұрын

Awesome! That’s great to hear! Glad you got it handled!

@scottcampbell4678 Жыл бұрын

Now, I am jealous

@Jazzydaze Жыл бұрын

DUDES!! The 3 bolts that go into the hub from behind ...2 out, 1 WILL NOT MOVE. Tried heat, hammers, penetrate... ideas?

@dustinsavage204 Жыл бұрын

@@Jazzydaze I’d put a 6 point socket on it with a power handle. 12 point rounds the bolts off on stuck bolts easily. It’ll either brake loose, or brake the head off.

@plymouthsuperbee1707 Жыл бұрын

Thats loterally where im at right now, fml

@wty1313 Жыл бұрын

For anyone trying this method. The issue is that "standard" bolts you get at the store (like the ones in this video) are only grade 2. Grade 2 bolts have a yield strength of 57,000 psi and tensile strength of 74,000 psi at 1/2 inch. It is far better to use AT LEAST grade 5 bolts (92,000 yield / 120,000 tensile) and even better, use grade 8 bolts (130,000 yield / 150,000 tensile).

@HowtoandReviewsOfficial Жыл бұрын

Definitely, thanks for sharing! I was focused on using random nuts and bolts that I already had and overlooked pointing that out.

@tritanium1 9 ай бұрын

Sheared off the head of a supposed grade 8 bolt. The other bent. But in spite of this, this technique worked for me!

@omarjordan7431 8 ай бұрын

@@HowtoandReviewsOfficialq++q a no

@worldman7188 8 ай бұрын

Not only should you use grade 8 bolts but also a fine thread of at least 18. Course threads have stripped out trying this.

@mikejohnson9118 6 ай бұрын

The Grade 8 "Black Oxide" bolts should be strong enough to do the job.

@tolow16 Жыл бұрын

This legit saved my life today. Was doing a 2012 F150 front wheel hub/bearing damn thing wouldn't budge for nothing in the world after 2-3 hours of using a Sledge hammer, Air hammer, and slide pully was ready to bite the bullet and take the knuckle off to have it pressed out somewhere but also didn't wanna risk damaging any ball joints or tie rods and making another issue to fix. Saw this video, went into my tool box and found some bolts and nuts and did the same process as you. The most satisfying noise in the world when you hear loud crack of the bearing as it starts to walk itself out. Got in out in less than 5 mins. Thanks so much.

@HowtoandReviewsOfficial Жыл бұрын

Awesome! Glad to hear it! I’ve definitely been there before I know exactly how you feel. Thanks for sharing!

@MrLuanDo 9 ай бұрын

Man, my 2012 F150 rear-wheel-drive is having the same problem with the front bearing hubs. Driver side was doable with a hammer. Passenger side is not budging. I had the same idea but got so tired and stopped. I'll get a bigger bolt and longer tools for better leverage.

@JimLambier Жыл бұрын

One of the longest jobs that I had to do was replacing a hub bearing. Like you said, most videos make it sound like the part will just fall off once the bolts are removed. I tried gallons of penetrant (multiple brands), heat, sledge hammers, rented slide hammers and even enlisted my teenager and his friends. No luck. I eventually tried something similar to what you suggested and they popped off incredibly easily. The only thing I would add is to try using 3 bolts if possible. I found I made the job easier. Also use anti-seize on the new parts mating surface. It will make the next time so much easier!

@HowtoandReviewsOfficial Жыл бұрын

I’ve been it that exact situation more than once. I know the pain. This has worked for me every time I’ve tried it.

@parrisprice5892 Жыл бұрын

A WHEEL PULLER tool will also work

@clasko2 3 жыл бұрын

Great method! Use a hardened steel bolt, washer, and nut to avoid shearing!

@HowtoandReviewsOfficial 3 жыл бұрын

Great point! Grade 8 bolts would reduce or eliminate the shearing issue. Thanks for sharing.

@timstone3441 Жыл бұрын

Learned this trick a while back. Couple of add ons that make this work better.. Use 8 grade harder bolts and nuts. You don’t break them as easily. Lightly grease the threads on the bolts as this make the cranking easier. And the best additional trick is to use an electric impact bumping it and going back a forth between bolts. BTW I will do the spacers as that is my next trick to add..

@HowtoandReviewsOfficial Жыл бұрын

Excellent tips! Thanks for sharing!

@timothyreed7238 Жыл бұрын

I’m doing the same truck I’m so tired today🤦🏽

@jafinch78 11 ай бұрын

Good deal, I was thinking the same. Was also thinking wire wheel cleaning up the mating surface and use some anti seize to maybe help make easier in the future. Especially if you're in salty road country.

@consciousobjector2507 9 ай бұрын

@@timothyreed7238How did it go? Any tips?

@wade6126 10 ай бұрын

The best way in taking wheel bearing assembly out so far ! Awesome !!! Thanks !

@tiredofit1429 4 ай бұрын

I'm going to do this slick trick. But afterwards I'm still going to beat that bearing with the sledge hammer, just because.

@reverseuniverse2559 11 ай бұрын

Very helpful I’ve been surfing KZfaq everywhere with no help, this was very straightforward 👍

@michaelotto8696 11 ай бұрын

Could have used this many years ago when I did battle with my first hub. Best part of a day of hammering along with what I call "vocabulary building" and not in a good way. Tip 'o the hat for sharing this valuable trick!

@greggraham8074 Жыл бұрын

Been doing this for years, always thought I should make a video of it as I haven't seen this on KZfaq before, only videos similar to what you describe in the beginning. Great job, great video, hopefully this gets around to everyone, makes it so much easier. Thank you for sharing.

@HowtoandReviewsOfficial Жыл бұрын

Thanks for the comment, I appreciate it. I first did this about 8 years ago. It’s a life saver. I started this KZfaq channel about 2.5 years ago and was happy when I got an opportunity to film it and post a video. The whole point of starting this channel is to help people out! Glad to see it’s getting some views.

@crewchiefification Жыл бұрын

BRO!! 10 MIN OR LESS. YOU ARE THE MAN!! THANK YOU!! NOT EVEN KIDDING!!

@HowtoandReviewsOfficial Жыл бұрын

Awesome! So glad it helped! Thanks for the update!

@tritanium1 9 ай бұрын

This definitely works! After hammering on the hub for two hours with a sledge, went down to the local hardware store, bought the hardware, and boom! Had it off in about 20 minutes! Real life saver here! Also, have to appreciate the other tutorial videos that conveniently skip the banging and cussing parts!

@HowtoandReviewsOfficial 9 ай бұрын

That’s great to hear! Glad it helped!

@TruthRISING2024 Жыл бұрын

An old head at OReillys told me about this method several years ago. I’ve used it I’d estimate 3-5 times.. it really does make the job much easier.

@edwardmccutchen8554 Жыл бұрын

You,'re the man! who would 've thought of the push bolt-method? I think I've just made myself A SELF PROCLAIMED WHEEL BEARING-MECHANIC!!!

@seriously3130 Жыл бұрын

I knew this but kinda forgot. So thanks for refreshing my antique memory brother! Really appreciate it a lot.. I now remember I had them break off before too and found that 1/2" grade 8 bolts saved that issue. Have a blessed day!

@HowtoandReviewsOfficial Жыл бұрын

Nice! Glad it helped!

@jjsoundguy Жыл бұрын

Absolutely brilliant. This is exactly what I need to do. My bearing is rust-welded to the knuckle. Thank you for this knowledge.

@consciousobjector2507 9 ай бұрын

How did it go? Any tips?

@jakeromano622 2 жыл бұрын

I spent 2 days fighting my wheel hubs and this was the only thing that would work. Thank you!

@Pos-Vibe 2 жыл бұрын

Just did mine same way

@minayowitz3268 3 ай бұрын

Definitely a simple and effective method. Thank you very much for sharing this tip.

@jameswiz 8 ай бұрын

Haven't tried this yet, but just BRILLIANT!!! SOME NICE fine thread bolts and maybe a trust washer too, and this is the makings of a tool set.

@denistibbs8677 2 жыл бұрын

Excellent clear advice and demonstration. Many thanks.

@HowtoandReviewsOfficial 2 жыл бұрын

Thanks! And thanks for watching!

@one7decimal2eight Жыл бұрын

I've done this method with rotors that have been frozen on where i beat and beat them with a hammer. The 2 bolt method works like a champ.

@roncruz5110 Жыл бұрын

I don’t normally leave comments but in this case I had to. I was changing the right front hub on a 05 Aviator and after over 6 hours of banging I was about to give up when I saw this video. It took me longer to drive to Lowe’s and get the bolts than it did to remove the hub with your method. FANTASTIC!!

@HowtoandReviewsOfficial Жыл бұрын

I’ve definitely been in that situation more than once. I’m glad it helped, and thanks for leaving an update! It means a lot. That’s exactly why I make these videos, to hopefully help someone out!

@BlueWoolSweater Жыл бұрын

I just used this method to loosen the bearing and used a sledge to get it fully separated. Thank you!

@HowtoandReviewsOfficial Жыл бұрын

Awesome, glad it helped!

@darolfitch8917 8 ай бұрын

Thank you for this. I have fighting a bearing for a couple hours. going to try it.

@240sxincanada6 11 ай бұрын

Best trick ever , spent hours on my bearing last night and within 5 min with your trick the bearing is out !! Wow thanks a lot !!!! 🎉

@HowtoandReviewsOfficial 11 ай бұрын

That’s great to hear! Glad it made it easy!

@kentbarger8628 Жыл бұрын

I'm a retired mechanic his method works I have some additional ideas that will help you also PB Blaster it's really well on rusted bolts also when I reinstall the hub assembly always put anti-seize on the surface area of the Hub this way if you ever have to replace it it will not be difficult to take out the Hub assembly also look up the torque specifications for your particular car do not over torque the nuts on the assembly and I put it on the shaft the anti-seize hope this information will help you

@HowtoandReviewsOfficial Жыл бұрын

Thanks for sharing! It’s appreciated!

@jeffu3248 Жыл бұрын

Yes. I use anti-seize often. It's a life saver especially for things like this

@travisrector3179 9 ай бұрын

Thank you for this. Been struggling with mine but I’ll try it tomorrow morning

@condoguy810 10 ай бұрын

Thanks for the very useful information. This method you show in your video is the only way I could remove my wheel bearing and it worked perfectly. Two thumbs up

@HowtoandReviewsOfficial 10 ай бұрын

Awesome! Glad it helped!

@timsmith3752 9 ай бұрын

This is going to be a lifesaver!

@syndicatestunts 11 ай бұрын

I’m going to try this tomorrow on a Crown Vic ex cop car. Thanks for the great video! 🤙🏽

@youcanseeitall Ай бұрын

Worked great on 2009 xterra. Thanks for the easy how to.

@HowtoandReviewsOfficial Ай бұрын

Awesome! So glad it helped!

@jasonp.brunke3601 2 жыл бұрын

Genius... I still love my puller... but this is just as good...

@thebeardedsupra3925 Жыл бұрын

Holy crap man you just saved me and my sanity 20 year old rust Chevy hubs did all the normal stuff found your video. Love it hub is out

@HowtoandReviewsOfficial Жыл бұрын

Great to hear!

@stevegutermuth191 Жыл бұрын

Thanks so much for this video!! My 2013 Malibu has always been in NC(travel up North to snow country occasionally though). The wheel bearing hub wasnt coming off like the other guy's KZfaq showed, he did say it was great living in SW though, no rust. I thought maybe there was a bolt I hadn't removed but his video said only 3 bolts which were removed. After trying a few things I finally went to ACE and bought (3) 1/2" x 3" bolts, (6) washers, (6) nuts and tried what you said. It was still a struggle moving the wrenches but it creaked n groaned a few times and FINALLY came off. BTW, loved your laughing video, that really emphaaized how ludicrous it is to expect the hub to just come off :), very entertaining. Thanks again.

@HowtoandReviewsOfficial Жыл бұрын

Thanks for taking the time to write the detailed comment. I appreciate it! Glad this was helpful and entertaining! Thanks for sharing!

@stevanrose7439 2 жыл бұрын

For something to push against try using a old brake pad. The metal is strong and they are light enough to be easy to work with. 👍. Get er done.

@HowtoandReviewsOfficial 2 жыл бұрын

Nice! Thanks for sharing!

@aerick711 11 ай бұрын

I love you..... I tried like 2 other videos and like 5 other things. I took my front bearing off completely and took a hammer to it the first time, but I had to also replace the 2 wheel bearings in the back. Thats when i stumbled on your video... In 90 degree heat... i almost died then your video saved me. Thank you

@HowtoandReviewsOfficial 11 ай бұрын

Awesome! I’ve definitely been there. Glad it was helpful!

@user-on6kr3rs5m 7 ай бұрын

Spent all day on mine and couldnt get it off. All the youtube videos showed them just dropping off but glad i saw you with a big slage hammer too lol going to try your way in the morning 😊

@vmrobles21 Жыл бұрын

I needed that last week. I had a stubborn Bearing. Great video thanks.

@HowtoandReviewsOfficial Жыл бұрын

Hopefully, the next one will be easier!

@kustomking1950 Жыл бұрын

This is an afternoon saving video! Thanks my friend!

@HowtoandReviewsOfficial Жыл бұрын

Glad it helped!

@NoSuffix 11 ай бұрын

A smart & easy-to-use trick!

@josephtrunk3565 Жыл бұрын

Very helpful , thanks for sharing.

@johnogden5 Жыл бұрын

Your bolt trick was the solution we needed. Nothing else we tried worked. We did use 3 hardened bolts with spacers for the removal. That allowed us to quickly distribute the load as we were pulling it off. We were working on a 2012 Ford Flex. The galvanic corrosion between the aluminum knuckle and the steel bearing is terrible here in Michigan. Thank you.

@HowtoandReviewsOfficial Жыл бұрын

Nice! Glad it worked! Thanks for the update!

@johnaustin9051 Жыл бұрын

Great, straight up video. Excacly the info I was looking for.

@HowtoandReviewsOfficial Жыл бұрын

I appreciate the comment. Glad it helped!

@tyehegstrom3362 11 ай бұрын

Slide hammer works amazing

@timsterkhim653 2 жыл бұрын

Worked like a charm👍 Thanks you for sharing😀

@HowtoandReviewsOfficial 2 жыл бұрын

That’s great to hear! Glad it helped!

@kartboarder22g17 2 жыл бұрын

Yes this is the way to do it in comparison with hub buster that isn't cheap by the way. Also use grade 8 hardware it can handle more stress.

@dundiditsportsclips8737 3 ай бұрын

I love how you kept it all the way real and entertaining.

@HowtoandReviewsOfficial 3 ай бұрын

Glad to hear that! Thanks, I appreciate it!

@andyp9747 Жыл бұрын

SWEET JESUS! It worked! Came off in less than 5 minutes! I LOVE YOU MAN!

@HowtoandReviewsOfficial Жыл бұрын

Awesome! That’s great news! Thanks for the update!

@abandonbelief Жыл бұрын

You are a genius that made this genius' day. Thanks for your contribution.

@HowtoandReviewsOfficial Жыл бұрын

Glad it was helpful!

@MountainSpringsAdventures Жыл бұрын

Brilliant 👏 Thank you for this video

@reinarhenriksson2108 Жыл бұрын

Thanks for this awesome tips, I'm surely gonna try this the next time.

@josephkrol1676 10 ай бұрын

Well just as i've been reading i finally did it and i have to add another comment thanking you for this video. Upstate new york rust. Got the bearing off faster than it took me to find which bolts to use

@HowtoandReviewsOfficial 10 ай бұрын

Awesome! Glad it worked well!

@aultman887 4 ай бұрын

AWESOME INFO DUDE!!!!!!! THANK YOU

@GG-ub4ej Жыл бұрын

Unfortunately I'm going to need this information this coming weekend. I sure do appreciate having it. I just hate changing cv joints but it has moved to the top of the to do list. This is truly a great strategy.

@HowtoandReviewsOfficial Жыл бұрын

It’s a good backup plan if it doesn’t slip out. Not sure if you were planning on replacing the bearing hub assembly too since you are going for the cv axle. If it doesn’t easily slip out, and/or if it has significant miles on it, I would personally replace it. I hope it goes well!

@GG-ub4ej Жыл бұрын

@@HowtoandReviewsOfficial I appreciate the reply. I am planning on changing the bearing hub at the same time.

@TheGreatHrudini Ай бұрын

Excellent, EXCELLENT video

@HowtoandReviewsOfficial Ай бұрын

Glad it was helpful!

@darshanpradhan-ks2qx 2 ай бұрын

Thanks for posting this video... this was the only technique that worked for me after trying out everything other techniques found on youtube

@HowtoandReviewsOfficial 2 ай бұрын

Awesome! Glad it helped!

@jackfarrell4727 6 ай бұрын

Thank you for the video

@reganswan6727 5 ай бұрын

Thank you for your video

@jeffomer7334 Жыл бұрын

You are a genius! Made my life so easy

@HowtoandReviewsOfficial Жыл бұрын

Awesome! Glad it helped!

@eduardopena6280 2 жыл бұрын

Nice ideas thanks..

@chung6758 11 ай бұрын

That's a good idea. I'll give it a try. Thanks

@cluelesssam6975 11 ай бұрын

I'am going to give you one million thumbs up for this awesome tip.. Thanks

@HowtoandReviewsOfficial 11 ай бұрын

Thanks! Glad it was helpful!

@jesse_- 10 ай бұрын

Great video! Thank you!

@mikan4216 2 жыл бұрын

Excellent common sense video

@floyd5292 Жыл бұрын

This is amazing!! Thank you 😊.

@zatoichibandit 2 жыл бұрын

where was this last week when i needed it?!?!? thanks you tube.

@Pontiacdreams 9 ай бұрын

Brilliant advice- Many Thanks!!!

@HowtoandReviewsOfficial 9 ай бұрын

I hope it helps!

@sonnynguyen8012 Жыл бұрын

Great idea. Thank you

@victorlopez2143 Жыл бұрын

good to know---Thanks

@maddogguzman3961 3 ай бұрын

Great video I'm gonna need all the help I can find doing my drivers side brg on sunday on my 2020 camry!!

@HowtoandReviewsOfficial 3 ай бұрын

Hopefully, you can tap it out with a hammer! Otherwise, I hope it helps!

@walterradcliffe5639 Жыл бұрын

Thank you for the tip. About to do this in minus temps, fingers crossed.

@HowtoandReviewsOfficial Жыл бұрын

Good luck!

@user-kg2nh1qd9e 11 ай бұрын

Looks good thank you

@jacobedwards9285 11 ай бұрын

Thank you very much

@taylorkoopman911 Жыл бұрын

this method is great... if you have a 3 bolt assembly. 4 bolt assembly this can rarely be done

@buddyboy4x44 Жыл бұрын

Done this job a few times and, you are right, most instructions just say pull off the bearing but don't say how hard it is and how to get around it. Excellent video.

@HowtoandReviewsOfficial Жыл бұрын

I would always plan these jobs when I didn’t need my vehicle for a day or two just in case, because they can seem impossible to get out. This method has worked awesome for me. They come right out.

@benruss4130 21 күн бұрын

mine alway just slide off lol. But then again there isnt a fleck of rust on my 1003 honda accord because New Mexico is nice to cars. My only problem is rubber rot.

@ScruffyDuck15 9 ай бұрын

This video has saved me so much time and effort. Liked and subscribed 👍

@HowtoandReviewsOfficial 9 ай бұрын

Glad it helped! I hope you find some of the other videos helpful or entertaining.

@tallicafan85 Жыл бұрын

nice trick. wish i would have thought of that over the years.

@31acruz Жыл бұрын

Nice job!

@rogerbranch9248 Жыл бұрын

Thanks for the help

@danieldufresne9966 Жыл бұрын

Great Video, saved me a lot of time!

@HowtoandReviewsOfficial Жыл бұрын

Glad it helped!

@tomascharles5080 2 жыл бұрын

Great vid.

@diydantex6150 2 ай бұрын

Thanks

@johnathangreay987 5 ай бұрын

My god you're so right. These bearings are no joke.

@RC-lc9ye Жыл бұрын

This is great I’m gonna try this actually bought that weird yo thing but I don’t think that’s gonna work is good I’m gonna try this method thank you

@peterp4753 Жыл бұрын

Great stuff!

@earlmenefee3421 Жыл бұрын

Thanks going to try it 😊

@lightcapmath2777 Жыл бұрын

Great advice! Thanks DVD:)

@agaba5500 5 ай бұрын

awesome. thanks

@nancymarlow2900 2 жыл бұрын

WOW Working on a 2012 Ford Explorer right now you make it look so easy Thank you for the tip I've been working on the right rear wheel bearing for 2 1/2 hours and it hasn't budged will try This

@HowtoandReviewsOfficial 2 жыл бұрын

This has honestly made it easy. Results exactly as shown. I hope it helps!

@roguebullet4220 10 ай бұрын

Thank you sir, this video is a 💎

@Sasquatch322 9 ай бұрын

This video was a huge help thanks!!

@HowtoandReviewsOfficial 9 ай бұрын

Glad it helped!

@frankiefixdiy 5 ай бұрын

nice work

@seanjohn2381 5 ай бұрын

Great. will be using these tricks

@HowtoandReviewsOfficial 5 ай бұрын

I hope it helps!

@floydwilcox2640 11 ай бұрын

Great tip, thank you 👍

@vwjti18t Жыл бұрын

Very helpful thanks!

@HowtoandReviewsOfficial Жыл бұрын

Glad it helped!

@russellgatten9171 Жыл бұрын

This is probably the most amazing thing I've ever seen you sir deserve a gold medal it's very simple and easy you have no idea of how many times I've almost killed myself to get a wheel bearing out thank you very much for putting that on here for people to learn

@HowtoandReviewsOfficial Жыл бұрын

Lol. Thanks. It has been great for me. I used to wait until I had one or two days free before starting a wheel bearing hub because the battle could take a couple days. This takes about 15 minutes to setup and extract. It’s been great!

@consciousobjector2507 9 ай бұрын

*HE'S SAVING LIVES!!*

@consciousobjector2507 9 ай бұрын

@@HowtoandReviewsOfficialthat's insane. I feel like I have the secret to the universe! I'm about to undertake this job on a car that's lived its 100,000+ life up north and rust is everywhere, dust shields long rusted off, and I hear that sound lol and was dreading knuckle busting and using those words I'm not supposed to use according to my better half. You're a life saver! 👍🏻

@HowtoandReviewsOfficial 9 ай бұрын

@@consciousobjector2507 that’s how I feel about it. I hope it helps!

@Brad-tq2pi 2 жыл бұрын

Good tip! Thx

@edgbostonnorth7167 Күн бұрын

Thank you ...

@jeffu3248 Жыл бұрын

Wow! Living here in here in one of those rust belt states and yes. Hammering away and you make get lucky with those rusty bearings. This video is a life saver because I was looking at all types of tools to remove stuck hub bearings. About to pick up some nuts and bolts now to try this out. Will report back soon 🤞🏽

@HowtoandReviewsOfficial Жыл бұрын

I hope it helped!