How To Replace Front Wheel Bearing Silverado 1999-2013 & 2014-17 for $120 | AutoZone Duralast Hub
Рет қаралды 359,160
Күн бұрынWheel Bearing Replacement. Learn how to replace the wheel bearing hub assembly on almost any truck or car. This is a 2004 Chevy Silverado, GMC Sierra but the process will be very similar for replacing any wheel bearing hub assembly with an axle running through it. I was able to purchase a new hub assembly from AutoZone for $120.
Duralast Wheel Bearing/Hub Assembly-Frnt. We will provide a review of the wheel hub assembly after testing it for some time before recommending you to purchase it. Other wheel hub assembly companies: Moog, NAPA, Driveworks, Timken.
Here is the Wheel Hub Assembly that I used: www.autozone.com/suspension-s...
Similar Wheel hub assembly products available on RockAuto: www.rockauto.com/en/catalog/c...
Other related products:
1AAHK00001
1AAHK00002
1AAHK00022
1ABFS02019
1ABMS00007
1ABMS00047
1ABPS00178
1AHTF00019
1APBS00350
1ASBJ00055
1ASFK03014
1ASFK04629
1ASFK04683
1ASHF00005
1ASHF00063
1ASHS00002
1ASHS00043
ACSHF00004
ACSHS00005
TKSHF00022
TKSHF00080
TKSHS00029
TKSHS00304
******************************************
Required Tools (Affiliate Links)
• 15mm Wrench
• 18mm Socket
• 22mm Socket
• 35mm Socket
• Lug Wrench
• A Piece of Pipe (for leverage)
• Ratchet
• Torque Wrench
• Hammer
• Chisel
• Jack Stands
***************************************************
🎬 Most Current Recording equipment (Affiliate Links)
***************************************************
📷 Video
Canon R6: geni.us/CanonR6_4K
Canon RF 24-70mm F2.8 L is USM Lens: geni.us/VnTwT
Canon 80D Camera Body: geni.us/Canon-EOS80D
Sigma 18-35mm F1.8 Art DC HSM Lens for Canon: geni.us/SigmaLense
Race clips shot using GoPro: geni.us/HERO9Black
🔊 Audio:
Lapel Mic: geni.us/PicoMic
Zoom ZH1 H1 Handy Portable Digital Recorder:
geni.us/ZoomRec
💡 Lighting:
Genaray Flood Light geni.us/GenarayLED
Genaray Softbox: geni.us/GenarayLightBox
Newer Ultra High Power Video Light: amzn.to/2Hl3QO7
----------
Thank you to all of our fans and subscribers for supporting us on our journey!
FOLLOW US ON INSTAGRAM: @THESUNDAEDRIVE - thesundaedrive
CHECK OUT OUR WEBSITE & BLOG: www.thesundaedrive.com
********************************************************************
👪 Partners and Sponsors
********************************************************************
Tool and Dye Designs - Auto enthusiast inspired clothing:
Website: www.toolanddyedesigns.com
Kies Motorsports - For all your BMW needs
Website: www.kiesmotorsports.com
KZfaq: / kiesmotorsports
Speed Circuit - LS Powered Exocet and Evo Upgrades
Website: www.SpeedCircuit.net
********************************************************************
🎵 Music
********************************************************************
@Brass_Heathen 17 күн бұрын
Thanks for keeping it super basic and respectful. There's a lot of guys that are learning off of here
@filipinophreak 3 жыл бұрын
Im.not a mechanic by any means, i change my own oil, brakes.. this was the first major repair ive ever attempted and with your video it helped me out tons.. i was nervous at first but i was able to do it. I called a local shop and they were going to charge me between 800-1100 dollars to change. No way i was going to pay that.. i looked up so many videos and urs was the only one that i felt was in depth.. thank you so much for your time and knowledge and for saving me a ton of money.. take care and be safe..
@TheSundaeDrive 3 жыл бұрын
Glad it helped you! Love hearing this
@nickl8074 Ай бұрын
a lot of work on these older trucks is pretty simple, best thing to do is be confident when you go into a job and PLACE THE BOLTS IN ORDER OF REMOVAL. also take pictures on every step so you remember what goes where.
@kurtatwood7007 Ай бұрын
The best self help video for changing wheel bearings on chevy silverado!
@SemperShock Ай бұрын
Yes. I appreciate the actual camera change angle when you were hitting the hub assembly. That makes a big difference in a video. We can’t see from afar (which many creators do, plant a camera a few feet away & never zoom in to where their fingers are at) and you had good lighting as well. Thank you for uploading.
@aaron5.3 Жыл бұрын
this is by far one of the most helpful videos because you actually showed everything
@TheSundaeDrive Жыл бұрын
Glad it helped!
@samsen3965 2 жыл бұрын
Past few days I am watching all the bearing hub exchanges and honestly, your video clip is the best of all. Thanks for the good job and have a wonderful one.
@XxSEF300xX Ай бұрын
Automatic Sub and like because you don't skip steps. Thank you so much. I was going to pay a shop to do this, but you made me confident I can do this easily myself!
@keithrayeski6417 4 ай бұрын
New sub. I had my passenger side wheel bearing on my 2011 GMC Sierra replaced by a garage because I had an extended warranty and the defect was found during state safety inspection. That was two years ago…this year, during inspection it was found that the drivers side is shot. I’m mechanical proficient enough with a fully equipped garage, that I believe I’m capable of doing this myself. Your video convinced me that I absolutely can! I was quoted 500 at the garage…I can’t deal with that. So, this week I’ll do it myself. Thanks for a detailed tutorial video.
@TheSundaeDrive 4 ай бұрын
Awesome! Love hearing this. Best of luck!
@adrenaline4life233 3 жыл бұрын
So much easier than I thought. Thank you for this!
@TheSundaeDrive 3 жыл бұрын
No problem! Glad it helped
@hartfordsignpost589 6 күн бұрын
Nice video. Better than most. Explained well and to the point and yes, you showed the hard part.
@robmcrae8713 5 жыл бұрын
Thank you. Great video. Was able to replace my hub assembly on my 2005 Silverado with the help of your video!
@TheSundaeDrive 5 жыл бұрын
Woo! Glad it helped :)
@clight77 4 жыл бұрын
Great explanation on the hammer and chisel part, watched several other tubes and for the life of me I was wondering how theirs came off so easy. Thanks.
@TheSundaeDrive 4 жыл бұрын
most KZfaqrs just ship over the hard parts. we try to show it so it isn't a surprise lol
@rickyreza4888 Жыл бұрын
This is a great video from start to finish. It's even better you had the sizes of sockets and what to torque them to. Very helpful 👌
@TheSundaeDrive Жыл бұрын
Glad you found it helpful! Best of luck with the job!
@work4dough 5 жыл бұрын
Awesome job, thanks a million. I just did my 2017 GMC Sierra with your video.
@flywiseman 10 ай бұрын
Thank you for this video. I took on this job this morning and still have not gotten the job off and was thinking I was missing something.
@jg01lox 3 жыл бұрын
I did these steps on my 2005 2wd Silverado. It was a life saver I went ahead and did the whole front suspension. Thanks for the video!!
@TheSundaeDrive 3 жыл бұрын
Awesome! Glad it helped!
@johnperez93640 9 ай бұрын
@@TheSundaeDrivethe title said the bearing. U did the hub.
@brody6634 5 ай бұрын
@@johnperez93640I don't think you can change just the bearing on these vehicles. You have to change the entire hub assembly... So replacing the gun assembly, is replacing the bearing.
@johnperez93640 5 ай бұрын
@@brody6634 the bearing alone CAN be replaced instead of the whole hub. But its just easier for the average DIYer to just replace the hub. The hub was put together somehow. If u reverse engineer it, ull see that the bearing CAN be replaced. (With a shop press and correct plates n stuff.) Myself, i buy just the bearings 6 at a time for a cheaper price, and then just replace the bearing whenever another comes in needing a "hub replaced". Like the bearing in idler pulley's, most are all the same bearing. I buy those by the dozen at a time for cheap and replace just the bearing when one comes in needing a pulley replaced. Parts stores dont really like that i do that for people because they wana sell hubs and pulleys. But for how much they sell those parts for, id rather not let them rip people off.
@jonrylander461 4 жыл бұрын
Just did this job yesterday. I used a cheapo air hammer from harbor freight (less than $20) with the chisel and it popped off the hub from the knuckle pretty damn fast. Nice video man!
@TheSundaeDrive 4 жыл бұрын
Harbor Freight is the best for tools like that lol. Glad it helped!
@JH-kh9lf 4 жыл бұрын
Thanks for the video. I got all my parts (Front Rotor's, Front Wheel Bearing & Hubs, Front Brake Pads, Front Shocks & Front CV Axle Shafts) for $860. Figured might as well do it all at once.
@TheSundaeDrive 4 жыл бұрын
Definitely a good time to get in there and do it all together. Hopefully the video helps you out!
@ODDBALLGALLERYKeithWilliams 3 жыл бұрын
Good video👍🏼 short, to the point, and well edited. I’m going to fix mine tomorrow. Thanks
@TheSundaeDrive 3 жыл бұрын
Thanks! Hopefully it helps you out!
@danknitz9679 Ай бұрын
Good video. Ive always used never seize on all my cars lug nuts. People think its a no no but i never had an issue with doing so
@NixieWaters 5 жыл бұрын
Thanks for adding the ft lbs tork to the vid!!
@TheSundaeDrive 5 жыл бұрын
Of course! We want the videos to be as helpful as possible 👍👍
@godstruesoldiers2539 2 жыл бұрын
Second this lol thanks
@dustenskinner8404 8 ай бұрын
Really appreciate the content man, you were a lifesaver
@TheSundaeDrive 8 ай бұрын
Glad to help!
@darkdisk 3 жыл бұрын
Replaced the driver side hub about five years ago. Had to do the passenger side this morning. Excellent video, hit all the key points you need to do this job. One thing I might add, is that you'll need to apply anti-seize to the hub where it contacts the spindle. Oh and using the chisel to separate the hub was money! Pro-tip right there that was extremely useful.
@TheSundaeDrive 3 жыл бұрын
Glad it helped!
@ronfox5519 Жыл бұрын
Chiseling that joint definately puts a high spot on the mating surface of the knuckle. It may look like you did no damage, but if you stone that surface, youll see it. Does it matter? Depends on how bad the damaga is vs how long you need the bearing to last.
@elbuitre6940 Ай бұрын
Great video i will do it this weekend thansk for the encouragement first time ever
@edhultgren517 3 жыл бұрын
Nice and quick but didn't skip the tough part, thanks
@TheSundaeDrive 3 жыл бұрын
Glad it helped! This definitely has some hard parts so don't want to minimize that
@alexdean9707 Жыл бұрын
Literally just now followed along and change mine!!
@TheSundaeDrive Жыл бұрын
Awesome! glad it helped
@betoquintino1414 Жыл бұрын
Wow very simple explanation! And helpful! Thanks for this great video ! You are the man ! 😊
@TheSundaeDrive Жыл бұрын
Glad it was helpful!
@williamstaggs9285 11 ай бұрын
Ya'll make it look SO easy! But this is definitely a useful video. Thanks so much!! 👍💪
@TheSundaeDrive 11 ай бұрын
Glad to help!
@jbyfaith06 4 жыл бұрын
Awesome video! Easy to see, follow, & I love the fact that u gave the torque specifications. 👍🏾💯
@TheSundaeDrive 4 жыл бұрын
:) glad it helped you out!
@germainalarie9141 4 жыл бұрын
wow well done bud ,one of the easiest to follow video you again.
@TheSundaeDrive 4 жыл бұрын
Thanks! Glad it helped!!
@johnkay8778 3 жыл бұрын
the hub vids for this job have different t specs ..thanks 4 giving the correct ones
@edwardpayne96 Жыл бұрын
I usually loosen the Axl nut before I jack up the truck. If it helps anyone. Awesome video
@mrarmy300 4 жыл бұрын
"6 minutes of just pounding it" lol, nice work, good stamina and grip
@TheSundaeDrive 4 жыл бұрын
😂 it’s all about the stamina
@mrarmy300 4 жыл бұрын
@@TheSundaeDrive great vid tho! Alternative to all that pounding is to remove the 3 hub bolts halfway, then with a punch or air hammer on the bolt heads it'll break free easier as the force is in line
@MicroSoftner 4 жыл бұрын
I'm not gonna even put the 3 bolts back, it's gonna fuse shut anyway lol
@TheSundaeDrive 4 жыл бұрын
😂
@ThePocketMechanic95 4 ай бұрын
Nicely done, nice video work as well. I was able to see what you were doing .
@tonelosmusic 3 жыл бұрын
This video helped out a ton. Thank you!!
@TheSundaeDrive 3 жыл бұрын
Awesome!
@Slimbo_85 5 жыл бұрын
Thanks this video really helped, i have the same noise i just want to be sure before i spend the money on the parts.
@TheSundaeDrive 5 жыл бұрын
Glad it helped!
@ryanfujimura8742 5 жыл бұрын
Great video man. Thank you!
@TheSundaeDrive 5 жыл бұрын
Glad it helped!
@ARXIZM 3 жыл бұрын
Thank you for the video! What can you say about the tires that you have installed? Good quality?
@cdubber2.0 3 жыл бұрын
THANK YOU!!! I was kicking meself trying to get it off!👍👩🔧
@TheSundaeDrive 3 жыл бұрын
Glad it helped!
@cdubber2.0 3 жыл бұрын
I DID using it!! thanks to your video tip..took me 30min! 😘👍👩🔧
@christopherhendricks4369 Ай бұрын
hey just was watching and noticed a step you missed. it's important you clean the splines on the front axle and apply some sort of grease as well. it makes it easier for the next time and prevents the new hub hopefully from seizing onto it
@MrRainbowrooster 4 жыл бұрын
Really nice job. Thank You!
@TheSundaeDrive 4 жыл бұрын
Thanks!
@bigchief4052 2 ай бұрын
Bout to go change mine now, wish me luck
@claytonsimplot9554 9 ай бұрын
I replaced mine 8 years ago,now they're needing to be replaced again. I ended up getting a 2" x10" x1/2" flat stock. Drilled 2 holes for the studs and 1 exactly centered between them. I bolted my slide hammer to the flatstock and the flatstock to the hub. My first try was to leave the three bolts in the housing and hit each bolt till the housing moved an inch,it was alot of work.
@JC-gw3yo 3 жыл бұрын
Great concise video... Thanks for the excellent video
@TheSundaeDrive 3 жыл бұрын
Glad it helped!
@justanothervote Жыл бұрын
For those of you who stripped the bolt, I reccomend using a William's bolt extractor. It worked like a charm for me.
@johnrussell5343 3 ай бұрын
Great vid, thx. Going to try it myself.
@r.s7081 4 жыл бұрын
Thanks for your help.Hopefully I wont screw up replacing mine.
@TheSundaeDrive 4 жыл бұрын
Best of luck with it!
@MikroMack 4 жыл бұрын
Really great tutorial. 👍🏼
@TheSundaeDrive 4 жыл бұрын
Thanks!
@x1stefanyx Жыл бұрын
GREAT VIDEO I THOUGHT IT WAS SIMPLE AND DIRECT
@TheSundaeDrive Жыл бұрын
Thank you! glad it helped
@anthonynyman167 3 жыл бұрын
Is there an after market hub assy where the sensor is separate? My passenger side sensor is shot but the hub seems perfectly good. And the warranty is done. I did this job last year on my '06 Silverado on the diver's side. I used the manual chisel&hammer. After 1/2 hr moved to air. 10 seconds later it's off. Only downside was the dust shield got wrecked.
@fredpastuh7518 5 жыл бұрын
Great video!Thanks bro!
@TheSundaeDrive 5 жыл бұрын
No problem! Hope it helps!
@jggjj 4 жыл бұрын
Good video very well explained. I read Autozone hubs dont last more than a couple of years. Many guys recommend Timken. I got one for my Escalade for $140 on amazon.
@TheSundaeDrive 4 жыл бұрын
Thanks! I've heard Timken is a good brand as well
@rowdync 2 жыл бұрын
Same here. Got mine at Summit Racing for 145.00
@davidyerden5142 Жыл бұрын
Great job...thanks for the video... My rotor is frozen also..lol😂
@joejones8009 8 ай бұрын
Was the truck getting bumpy when reaching high speeds?
@mariomunoz2303 4 жыл бұрын
I enjoy your video...thanks!
@TheSundaeDrive 4 жыл бұрын
No problem! Glad it helped
@bullhandy 3 жыл бұрын
Torqued the lugs! Great video! Thanks!
@charlesmyers9765 2 ай бұрын
Vertical play is the best way to check as you demonstrated. Horizontal play could also be tie rods.
@TheSundaeDrive 2 ай бұрын
Good point:
@BigChooch8787 2 жыл бұрын
Awesome video bro helped alot! Thanks pal
@TheSundaeDrive 2 жыл бұрын
Glad to hear that!
@richlymann6451 3 жыл бұрын
Good Video Sir Very Informative
@TheSundaeDrive 3 жыл бұрын
Glad it helped!
@MDTAR15 3 жыл бұрын
Really good video... well done!
@tommymurashie 2 жыл бұрын
very helpful, thanks!
@TheSundaeDrive 2 жыл бұрын
Glad to help!
@franzrojas7508 27 күн бұрын
Thank for your video I do it today but mine doesn’t have the middle nut so is more easy
@philipsvatba2125 Жыл бұрын
Great help.. thank you
@blakehobson6930 3 жыл бұрын
So I just bought a hub assembly and the holes for the 15mm bolts that hold the hub on is not threaded, so is there anyway somehow to put it on?
@micjam1986 3 жыл бұрын
For anyone struggling. remove one lug stud,, get a long bolt put it through the old hub hole, thread on a big nut till the bolt touches the spindle and the nut threaded up to the back of the old hub... hold the nut with a big wrench as you tighten the bolt,,, when it starts to move.. loosen it and rotate the old hub and do it again. Another trick is a pipe wrench slipped over the hub flange(wrench pointing down so it stays) tighten up the jaws good and then hit the handle of the pipe wrench with a sledge hammer. I havent tried this but ive seen it work good. Maybe a jackstand under the lower control arm spindle to support it before you swing the sledge hammer? Getting pissed helps too ..lol
@TheSundaeDrive 3 жыл бұрын
Good tips!! Thank you
@hopehaskill8874 9 ай бұрын
I really was hoping to see how you disconnected the abs cable at the top...
@SrirachaGT 9 ай бұрын
Very helpful
@JJ-rr9uw 9 күн бұрын
Did you apply anti-seize to the studs ?
@keepingtime525 4 жыл бұрын
Good video. 👍
@TheSundaeDrive 4 жыл бұрын
Thanks!
@caspere.8461 Ай бұрын
A torch is your friend. A little heat on the bolts does wonders getting them to break.
@mattheweustis9506 4 жыл бұрын
What greese ? When replacing the hub assembly
@garydoyle7155 4 жыл бұрын
the part you said you don't want to feel stupid on at 4:04 put the nut back on to protect the threads then whack it with a hammer to drive the axle out the back - - it moves axle back allowing access to the hub bolts and makes it easier to separate the hub - - it may still take some convincing but the axle end no longer adds adhesion to the issue
@GRestores 3 ай бұрын
Thank you
@carlospuebla2066 2 жыл бұрын
Do you know how to fix your gas gauge and your temperature gauge I cannot find the fuses twist Victor stopped working
@MAJESTICJONES 5 жыл бұрын
Thank you for the video one question what did you torque the tires lug nuts to??
@TheSundaeDrive 5 жыл бұрын
Manual suggests 140lb-ft
@MAJESTICJONES 5 жыл бұрын
@@TheSundaeDrive thank you appreciate your time man
@hitmanfg2 3 жыл бұрын
Made it look easy.. Have a 03 rado and my hub bearing broke a part on the highway at 70 mph today 8_20_2020. The inner cap fell off all the grease spilled out also pieces of the bearing including the stones it has inside the bearing . The thing is I didn't have signs of a bad bearing or hub. No knocking or wiggle or grinding what so ever. It just tugged to the left hard. Could of been worse. Hopefully no heavy damage to anything else
@TheSundaeDrive 3 жыл бұрын
Aww man. That stinks! Hope everything else is ok! Surprised you didn't have any warning prior
@hitmanfg2 3 жыл бұрын
@@TheSundaeDrive I live in Los Angeles Cali. Weather is hot. Windows up a.c. on. I run 33s on my truck it is alil loud with the howling maybe i didntt catch the warning signs. But yea bro all fixed New wheelnhub and rotor 💪💯
@TheSundaeDrive 3 жыл бұрын
Glad it wasn't too bad to fix!
@ArturooGuillen Ай бұрын
How to take the top bolt from the back of the bearing ? I can’t even get my socket in there.
@r8rsavage510 3 жыл бұрын
What’s up man great video I notices though you have a 35mm socket listed but you said 36 in the video? Do you know which one it is? I have to buy one
@eengineer1558 3 жыл бұрын
For anyone else wondering, I bought a 36mm and it worked but I felt it was 1 size too large and a 35mm would have been better.
@generalwrex 4 жыл бұрын
Thank you very much! After I replaced mine my ABS light is stuck on, i haven't drove it that far or that fast, do you know the threshold speed where it will retest?
@TheSundaeDrive 4 жыл бұрын
Not sure when it retests, sorry. My ABS light has been on for a while now too but I haven't tested any of the sensors to see if it is the new hub or something else.
@generalwrex 4 жыл бұрын
@@TheSundaeDrive I found the issue, when I installed the new assembly I bent one of the pins when I inserted it into the connector, which then broke off, nothing a soldering iron, old sensor, and liquid electrical tape couldn't fix.
@rustyshackelford7651 2 жыл бұрын
Good vid, you skipped removing the bolts that hold the bearing on tho. Those can be a challenge. Sometimes you can only use a box end wrench because of the cv shaft being in the way. And they definitely aren't just going to come out easy with a little stubby 15mm.
@enginenut4318 2 жыл бұрын
true need a long wrench 15 mm. make sure you dont round the the head bolts. tough to get off
@eddienc7380 2 ай бұрын
If you have really loud mud tires then it would be a good idea to check them every once in a while cause you won’t be able to hear when they start making noise.
@kaylastrelec4006 2 жыл бұрын
So I purchased my hub assembly the one from Auto zone by no means am I a mechanic but why doesn't my hub have a hole through the middle ?
@travisjudy5994 3 жыл бұрын
How much grease do you put the hub?
@jacobmulvaney42 2 жыл бұрын
Is it a 35mm or 36mm? For the axel?
@slothdaddy3315 5 жыл бұрын
Have a question do the hub bolts only thread into the hub be the ones on my 99 are so badly rusted the bolt heads are gone so I was thinking I could cut the hub in 3 spots and punch the bolts out ?
@TheSundaeDrive 5 жыл бұрын
Yes, they only thread into the hub so you could cut the hub and punch the bolts out
@benaldean8993 5 жыл бұрын
How did you get that shield back onto the new hub assembly? You kinda skipped it lol otherwise very good quality video
@TheSundaeDrive 5 жыл бұрын
Haha guess Pete was in too much of a hurry. I'll see if he remembers
@trevorach9378 2 жыл бұрын
I was wondering what that thing was called my hub thing is just hanging there it already off when I took everything off
@RobtJude 3 жыл бұрын
Those 15mm bolts don't come put without a fight. I used a breaker bar with a pipe extension and broke a socket. The socket split into two pieces. Ended up using PB, WD40 and a torch.
@TheSundaeDrive 3 жыл бұрын
A Torch and PB blaster are a mechanics best fried
@markadams5823 2 жыл бұрын
36mm nut on the CV axle?
@charlieboggs5210 Жыл бұрын
Also helpful use some penetrating oil where the hub goes inside the spindle loosen the cv axle nut and beat around the wheel bearing that your going to scrap anyway sometimes that way you get away without the chisel
@TheSundaeDrive Жыл бұрын
That is always a good idea
@TheNortonio Жыл бұрын
Wonder if a gear puller would have help get that hub off? I've got to do my GMC Sierra soon. Starting to sound bad.
@toddwiik4474 Жыл бұрын
Puller
@mattspillane3332 Жыл бұрын
Had to sub once I saw the Eagles hoodie! Go Birds
@TheSundaeDrive Жыл бұрын
haha thanks!
@dk9628 5 жыл бұрын
going to have to do this fix on my 14
@TheSundaeDrive 5 жыл бұрын
How many miles did it take for yours to go bad?
@kingrukus1234 5 жыл бұрын
I have a 2015 with mostly all highway miles 55 - 60mph. I have 90200 at the moment and my driver front just started to "hum"
@TheSundaeDrive 5 жыл бұрын
@@kingrukus1234 oh boy. I'm at 84K probably 50% highway on my 2014. Hopefully mine doesn't go bad too soon
@kingrukus1234 5 жыл бұрын
Yeah, probably getting close. I had it repaired today. $443.70! Only $70.00 of that was labor!!!
@TheSundaeDrive 5 жыл бұрын
Ouch
@michaelbiasi 3 жыл бұрын
just bought complete set both sides with new fasteners 100 bux from detroit axle dont know as to the quality will get back to you on it
@liddyyamaha36 3 жыл бұрын
how many miles did u have on that bearing before it took a shit? should i be concerned that both my front OEM bearings only lasted 110k miles?
@jacobadam4556 2 жыл бұрын
Is it 36mm or 35mm? It says 36 in video and 35mm in video info?
@sanityone649 4 жыл бұрын
Not bad...thanks.
@rosamoreno4794 4 жыл бұрын
I had that exact noise for a week it was so bad. I had to get the hub & bearing replaced on the front driver side. I felt it right under my butt, it was so bad. $ 376 for parts & labor.
@TheSundaeDrive 4 жыл бұрын
Definitely something you want to fix. That's not a terrible price. Especially if it siezed up like this one.
@hillcountrygarage Жыл бұрын
Good job
@TheSundaeDrive Жыл бұрын
Thanks! Hope it helps!
@gregterry8309 4 жыл бұрын
how did the brake assembly come off so easily? did you skip a step or does it come off just like you showed in the video
@TheSundaeDrive 4 жыл бұрын
The brake caliper assembly comes off very easily. The caliper is held on with two bolts and the bracket for the caliper is help on with the two 18mm bolts. Pretty sure you removing the two 18mm bolts is all you need to do to remove the entire assembly
@thomasharlos6872 3 жыл бұрын
Hello, my 2002 yukon xl has play from left to right but not really top to bottom. Could it still be the bearing / hub assembly ? Any info would be helpful, thanks.
@TheSundaeDrive 3 жыл бұрын
It’s possible since mine really had play in all directions, but mine was also in terrible condition. Could also be the tie rods if you’re getting left to right play. Worst case it could be the pitman arm or idler arm in the steering but that would affect both wheels in the front
@ChristianSmith-ei8yp 3 жыл бұрын
@@TheSundaeDrive I have a 2001 2wd Silverado, my front left wheel has slight play in up and down and a lot left to right and the right wheel is only up and down a little. The mechanic told me I’d need both inner tie rods and the wheel bearing for the front left wheel. But the weird thing is that there was no sound or anything coming from the wheel bearing 🤷🏼♂️
Tony The Truck Guy
Рет қаралды 14 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,4 МЛН
Hardly Moving Productions
Рет қаралды 253 М.
Denis МЕХАНИК
Рет қаралды 473 М.
The Sundae Drive
Рет қаралды 1 МЛН
Car Wizard
Рет қаралды 1 МЛН
Axle's Garage
Рет қаралды 439 М.
#ЧУДОТЕХНИКИ с Георгием Беловым
Рет қаралды 1,8 МЛН