How To Replace 2003-2011 Ford Ranger Front Brakes

Рет қаралды 25,001

2 жыл бұрын

In this video we will show you how to replace the front brake rotors and pads on a 2003-2011 4WD Ford Ranger. This is a complete guide that shows what is involved with performing a full brake job on this vehicle.
Shop our Amazon Store: Ford Ranger Brake samzn.to/3H3RrMY
Subscribe to our channel: kzfaq.info...
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages, or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential, or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission-based when products are purchased from them.

Пікірлер: 39

@HomeOwnerRepair 2 жыл бұрын

Hope this video helped you out. Let us know if you were able to tackle this job on your own. Drop us a comment and we'll reply back!

@oldman6365 Жыл бұрын

Great video! You show the proper way to change pads and add lube.

@HomeOwnerRepair Жыл бұрын

Glad it was helpful!

@goofypettiger 28 күн бұрын

Awesome video, dude! Thank you for sharing this!

@HomeOwnerRepair 24 күн бұрын

Glad you enjoyed it!

@MegaRj16 Жыл бұрын

Thanks for the video guys replacing the brake on my 2003 ranger this weekend 💪🏼

@HomeOwnerRepair Жыл бұрын

If you follow this video you should be all set. Sub the channels it's free and as we do repairs to this truck I'll post more videos.

@ThunderbirdRocket 2 ай бұрын

Extraordinary detail ! Super helpful !! I learned lots !!! Thanks mate . 👊🏼 🔥

@HomeOwnerRepair 2 ай бұрын

Glad it was helpful!

@s.t.e.r.e.o. Жыл бұрын

Thank you This video helped a lot...

@HomeOwnerRepair Жыл бұрын

Glad it helped

@TheThirstycoyote Жыл бұрын

👌👌👌 nice Miller time for that guy 👍

@HomeOwnerRepair Жыл бұрын

You got that right!..lol

@Nemelo Жыл бұрын

Great video thanks for the good explanation! A question though... Are rotors the same for 4x4 and 4x2 Rangers? I own a 2011 XLT 4x2. Thanks guys!

@HomeOwnerRepair Жыл бұрын

They should be different.

@fishinguy0660 9 ай бұрын

what did you use to lube up the caliper pins?

@HomeOwnerRepair 5 ай бұрын

Brake caliper pin lube

@fishinguy0660 9 ай бұрын

can you use brake clean for the carb cleaner?

@HomeOwnerRepair 5 ай бұрын

Yeah that will also take the oil off of the brake rotors.

@doge8676 6 ай бұрын

What’s the torque spec on the caliper screws that unloose the pads?

@HomeOwnerRepair 5 ай бұрын

I currently do not have the specs available to me. You should be able to find it online.

@jkjokeryt2699 Жыл бұрын

Look I haven’t had a truck or car for long and was wondering is a 4 wheel drive have the same install process

@HomeOwnerRepair Жыл бұрын

You should be able to use the basic steps show in the video and apply them to your vehicle.

@Natebyrd479 3 ай бұрын

Do I need to take my brake fluid cap off while depressing the brake cylinder?

@HomeOwnerRepair 3 ай бұрын

It won't hurt anything if you do. I recommend doing one side at a time when doing brake jobs. Once you are done one side and everything is back together then go to the other side and collapse that caliper. You will have less of a change of spilling brake fluid out of the master cylinder using this method. Hope this helps you out.

@Lodoz 10 ай бұрын

Mine are so rusted I can't get the 15mm off for the calipers.

@HomeOwnerRepair 10 ай бұрын

They get rusty up here too.

@HomeOwnerRepair 10 ай бұрын

Thanks for watching

@willyum2633 4 ай бұрын

You didn’t even have the camera up close enough to show us how to even collaps the piston.

@Stick1370 3 ай бұрын

If that wasn’t good enough for you, probably need to find someone to do your brake job for you.

@HomeOwnerRepair 3 ай бұрын

Thanks for checking out our video.

@Lugenfabrik Жыл бұрын

Not gonna clean those pins huh? 😁

@HomeOwnerRepair Жыл бұрын

They have been cleaned.

@dalescribner3070 Жыл бұрын

This is a front wheel drive car, 2010 Ford Ranger is a real wheel drive car.

@HomeOwnerRepair Жыл бұрын

Thanks for watching.

@levipote8823 5 ай бұрын

Wrong this is rear wheel

@dude55man 5 ай бұрын

I can't tell if this is a joke or if they don't know that Rangers have front discs and rear drums And that it's a RWD Ranger instead of a 4WD

@abowden5079 3 ай бұрын

You're pushing the pistons back in before opening the bleeder or removing the reservoir cap at the very least. If someone had topped up the fluid at some point and its already full, then pushing those pistons back in is going to cause damage.

@HomeOwnerRepair 3 ай бұрын

We checked the brake fluid reservoir as we always do before performing this brake job. Yes, you can loosen the brake fluid reservoir cap to allow for an over filled brake reservoir. If you do one side of the vehicle at a time as shown you should be all set. Never had an issue in the 35+ years of doing this using this method.