How to Replace a Ball Joint (in depth, ultimate guide)

Рет қаралды 1,999,237

Күн бұрын

Replacing a Lower Control Arm Ball Joint. Learn how to replace a lower ball joint by pressing it out of the control arm and pressing the new one back in. To watch the longer, in depth version, click the link below.
Replace a ball joint (short, fast version): • How to Replace a Lower...
Here is where to get the ball joint press: www.amazon.com/gp/product/B002...
Torque Wrench I use: amzn.to/1N65Maz
Socket Set I use: amzn.to/1BlL0Tj
Ball Joints: amzn.to/2qEOOhc
How to check your ball joints to see if they are bad: • How to Check if a Ball...
In-Depth Version: • How to Replace a Ball ...
Upper Control Arm Replacement: • How to Replace a Contr...
How To Press a Ball Joint: • How to Press a Ball Joint
How to Change a Wheel Bearing: • How to Change a Wheel ...
Torque Specs are for my 2001 Mazda B3000
(each make and model will have different torque specs so check your service manual for proper torque specs.)
-Lower Ball Joint
83-113 ft-lbs and tighten to the next slot for the cotter pin (don't back the nut off)
-Upper Control Arm Ball Joint
35-46ft-lbs
-Caliper Bracket Bolts
85ft-lbs
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: kzfaq.info_c...
-KZfaq Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Пікірлер: 1 100

@bobbyshah5743 7 жыл бұрын

This guy is the best instructor for car stuff on YT period....

@chrisfix 7 жыл бұрын

+Bobby Shah thanks Bobby!

@michaelfoster5475 7 жыл бұрын

Bobby Shah he really is, I've been watching his videos non stop.. who ever dislikes his videos are idiots.

@normanbuchanan9710 7 жыл бұрын

Bobby Shah the best bar none

@KM5347 7 жыл бұрын

The ones who dislike 1. Jealous mechanics who lack the charisma, dedication, and hard work to make a channel like this 2. Selfish mechanics who have a hard time simplifying or even sharing this knowledge with the general public 3. Competing KZfaq mechanics who can't do it like Chris 4. People who use a different brand of threadlock or ratchet set 5. People mad Chris doesn't have boobs to look at

@jnambo5500 6 жыл бұрын

KM5347 okay calm down!

@jonerikgreene1175 5 жыл бұрын

Did lower ball joints, both inner and outer tie rods, and upper control arms today.... it’s a lot easier to watch the videos than do the work! I couldn’t have done it with the confidence I had (which got me through some rough patches) if not for your videos. So, again, a BIG THANK YOU.

@cyrusIIIII 3 ай бұрын

You are saving thousands of dollars man.

@GreyStreet14 Жыл бұрын

Absolutely did the same exact thing Chris did and I had so much confidence! Chris' videos being free is a crime!

@GeoJockey Жыл бұрын

ChrisFix repair videos are the BEST...! Attention to detail, no cussing and very well done. Bravo!

@chrisfix Жыл бұрын

Thank you

@chrisfix Жыл бұрын

Thank you

@chrisfix Жыл бұрын

Thank you

@niktarasyuk8514 Жыл бұрын

Simply the best instructional videos... the visibility, the clarity, the pace... everything is simply spot on, no fluff, absolute top of professionalism. Unreal work, thanks Chris

@cassiusclaynyc 9 жыл бұрын

first video of yours I've seen and I am very impressed with not only your knowledge but the perfect clarity that you explain in. Not everyone can do this! I've been to 2 years of Automotive vocational school and was a light wheel mechanic in the Army. I learned a ton of new stuff. Keep em coming bro. Much appreciated.

@chrisfix 9 жыл бұрын

cassiusclaynyc Thanks a lot man! And thanks for your service! I am glad my videos are clear and helpful, that is a goal of mine! Stay safe and keep learning as much as you can!

@JohnnyGutierrez-um6nt 24 күн бұрын

It’s so crazy he has like 25 likes on this I swear this is the best video I seen all damb year on a very complicated repair he simplifies so well ❤❤❤

@sergeantinfantrymen1468 3 жыл бұрын

This guy has saved Americans collectively probably millions, without doubt. Amazing channel 🔥🔥🔥🔥🔥

@Chris3836 8 жыл бұрын

Thanks for using regular tools, they give me confidence knowing that an average guy like me can do this with simple hand tools. Much appreciated. :)

@leorahim6268 4 жыл бұрын

Learned so much from Chris's channel. Defiantly the best instructor on You Tube.

@chrisfix 4 жыл бұрын

I'm glad you are learning a lot!

@takeadayofff 7 жыл бұрын

8:48 turn the C-clamp upside down to install it easier. Remeber, it's a system with 2 opposing pressure points, so the force upon them is identical no matter which way the C-clamp is pointed. 9:38 the sharp edge of the snapring should be pointed down so if the press fitting looses tension from extreme use, the snap ring will bind in the groove and help prevent separation. 9:44 tap around the snapring with a flat blade punch and a small hammer to make absolutely sure it is fully seated in the groove. Probably best to install the grease zerk last so u don't damage it during CV/knuckle maneuvering.

@adamskead8859 5 жыл бұрын

Shhh it doesn't matter how it's done as long as it's done

@scottdonahue9193 Ай бұрын

I looked through the comments to find this.... I'm not being a critic, because he did a good job, but I did notice two out of three of these

@shag377 7 жыл бұрын

This video saved me over 500.00 in labor. My cousin had the tools, including the press, for me to do this. Thanks for taking the time to make this.

@TechCrazy 2 жыл бұрын

You could also rent those tools from a local auto shop.

@alexjones8141 9 жыл бұрын

Your videos and descriptions are EXCELLENT! You explain things in simple terms and show that a person doesn't always need special tools to do the job. And the fact you provide helpful links.

@waterboy8999 8 жыл бұрын

Great video sir, no crap, and no music, thanks.

@chrisfix 8 жыл бұрын

+David Punton Thanks! Glad the video was helpful!

@chrismartin9084 6 ай бұрын

Man I am so glad I found your channel I literally knew nothing about cars or how to fix them but the way you break stuff down it makes it sound simple enough for average people with no proper training to do it themselves and save hundreds if not thousands. I recently just changed a tie rod and ball joint on my 2017 Nissan rogue all from your videos!

@elijahvertsehovski7020 6 күн бұрын

And this is where it all starts from. So many years, Chris. Almost showed your face lol Good job buddy!

@Zooumberg 7 жыл бұрын

Chris, I'm loving your videos. Thank you for taking the time to upload them. And of course educating us at the same time. We're all much appreciated by your kindness.

@rochelleanderson882 6 жыл бұрын

Omg I'm so beyond excited to have found this from you! All four upper and lower ball joints are bad in my SUV and I have been told that'll be well over a grand maybe even a couple grand fix. I was looking all over the Internet for info on how to do this at home and came up pretty much empty handed. All your videos are so detailed and easy to follow even for people who have no car knowledge. I feel confident I can order the parts and do this. Thanks so much! Btw I can't believe you haven't found sponsorship. Someone should pick you up soon.

@tomasgaspar8065 6 жыл бұрын

Rochelle Anderson a woman that can replace ball joints? This i have to see

@pxndxlunx5821 5 жыл бұрын

How did it go?

@xxmuadxdibxxable 5 жыл бұрын

tomas gaspar you are a certified duesche nozzle. Let’s see if you can clean your nutsack with out your mother helping. Now this I gotta see.

@bagginn 4 жыл бұрын

SoLID SiC haha

@codyq0987 10 жыл бұрын

Now I am a big fan of your video. 1> you detail all the steps 2> you show where the tool is come from 3> you indicate safty issues 4> you use simply tool. Great show. Thank you

@chrisfix 10 жыл бұрын

Great! That is how I make all of my how to videos. Glad you enjoyed it! Remember to give the video a "thumbs up"!

@Howtosurviveamerica 7 жыл бұрын

All of those steps for one ball joint? No wonder why they charge you a lot to repair!I'm glad you showed me cause as much work as it is, it'll save me money.Thank you!

@chrisfix 7 жыл бұрын

No problem! It is not that bad once you do one! The other side goes a lot faster!

@adamschatz7718 8 жыл бұрын

Hey Chris, I really, really appreciate your videos .. I find them to be the best DIY home auto repair videos out there, and you've saved me hundreds of dollars. Very much appreciated.

@dcanon 10 жыл бұрын

Wow, very detailed and informative. Erictheguy should be worried. Love that you film every angle/shot and with proper lighting. Do you have someone holding the camera? I don't even hear any traffic - just birds chirping. I hope you're sponsored because you're good at what you do. Keep up the great work!!

@chrisfix 10 жыл бұрын

Haha, thanks a lot man! I do everything myself. I use a tripod and many times I wish I had a 3rd arm. I edit all of the traffic out and as much of the other noise (birds, planes, buses, etc) out as well. I am currently looking for sponsorships but no luck yet. Thanks for the awesome feedback! I really appreciate it! It makes making these how to videos worth the effort!

@jameslogan3383 6 жыл бұрын

Would you do the upper and lower ball joints on the Nissan pathfinder 2007-2009? Also lifts on the struts

@sz4179 6 жыл бұрын

Hi ChrisFix, Can't believe you don't have sponsors beating down your door to attach themselves to your top notch you-tubes.. Thank you so much for great gift of free instruction and advice on car repairs, I couldn't do it without you and a couple other of the great generous you-tube mechanics. and the factory service manual. .. I have watched a lot of your auto-repair videos and never seen you do any Hack thing on them, always professional, the best! Whoever you learned from was stellar. Thanks for the inspiration to do it right, too! Nicole

@dustingriffith7415 6 жыл бұрын

Chris Fix is a great KZfaq instructor. His voice is so soothing and makes me feel like I can accomplish any auto repair I need. Plus you never see his face, which gives him a certain allure.

@davebonnie4 9 жыл бұрын

Hello Chris, I'm done. First one took 3 hours, second one was 55 minutes. The solution I used for the stuck tapered ball joint was an old gear puller, penetrating oil, and two 5 second blasts of electronic parts cleaner and lube,(much like Freon,gets real cold). Waited about two minutes and it popped out on its own. Just got it all aligned and tires rotated. Thanks again for the great! video.Your camera work, editing,and syntax really pull it all together, You saved me a boat load of funds. Dave

@chrisfix 9 жыл бұрын

davebonnie4 Glad the videos were helpful Dave! Thanks for letting me know how it went! See how much faster it is when you do it a second time! Nice work!

@earlkoropatnick1928 10 жыл бұрын

Love your video's you describe everything even simple things like shaking the truck to ensure a stable lift. Please keep it up!! Thank you!

@chrisfix 10 жыл бұрын

Thanks! I try to keep it simple yet provide the maximum amount of detail to make the job safe and easy!

@dirtydan9032 4 жыл бұрын

I love how you do everything with hand tools!! Great videos man keep it up

@bradforddrake8633 Жыл бұрын

Fabulous video! Now I have the confidence to "do-it-yourself" and save big $$$! Thank you Chris!

@bhumane8642 3 жыл бұрын

The amount of time you spend on everything. Including editing blows my mind. Thank you for your videos, you do an excellent job teaching. Not too fast not too slow!

@CaseyChambliss 7 жыл бұрын

Your videos are so useful! Thank you!! Your attention to detail, editing, clear sound and shots are appreciated. Thank you for taking the time to edit these and making them high quality. Bonus points for showing how to do this with hand tools and stuff you can borrow from a parts store.

@imjabroni1 5 жыл бұрын

Thanks for the info in your videos, and for the CONFIDENCE to attempt this job. I did both upper ball joints, sway bar end links and tie rod ends on my '06 Ram 1500. The satisfaction of doing it myself makes the hundreds of dollars I saved worth even more to me.

@chrisfix 5 жыл бұрын

That's awesome! Nice work and I am glad the video was helpful!

@riley633 9 жыл бұрын

Hats off to you ChrisFix!!! I like referring to your videos all the time, You go thru these videos step-by-step for the ordinary people who doesn't have all of the special tools on hand. You are down to earth my man. Thanks again...

@chrisfix 9 жыл бұрын

riley633 Thanks man! I am glad my videos have been helping! That is the idea, easy to follow, step by step, concise, and educational how to videos using common tools! New automotive 'how to' videos every Thursday and most Mondays!

@jaykay6897 Жыл бұрын

Excellent video!!!! Clear concise, excellent videography and editing along with to the point commentary instructions with no ums and ahhhs and wasted unnecessary silent gaps. Super well rehearsed and scripted. Well done!!!

@chrisfix Жыл бұрын

Glad it was helpful!

@haroldbaptiste4749 9 жыл бұрын

Great job. Keep up with those vids been learning alot and taking the time and patients to do it myself.

@chrisfix 9 жыл бұрын

Thanks man! I am glad you are learning a lot from the videos! That is my goal!

@SalandFindles 6 жыл бұрын

+Harold Baptise Patience**

@chrisfix 9 жыл бұрын

+Brian Ramuno, I cannot reply to your comment for some reason but I hope you see this. I dont know what springs you need to compress. You are not taking the control arm off, you are just moving the knuckle out of the way. I will have a new video next Thursday working on another car to show you the similarities and difference in removing the ball joint and pressing in a new one. If you watch the video, that is what you need to do to press out a ball joint.

@mitchtalmadge Ай бұрын

Thanks for the video Chris. Btw your description says "To watch the longer, in depth version, click the link below." but I think you meant the short, fast version.

@patricklogston4031 4 жыл бұрын

I appreciate you taking the time to do these videos! Really helps me keep my 99 Suburban maintained and running good and safe for my family! Thank you sir!

@MrGeno1951 9 жыл бұрын

This video has renewed my mechanical instinct and confidence. Thank you, ChrisFix: you are an exceptionally gifted teacher.

@chrisfix 9 жыл бұрын

MrGeno1951 Awesome! That is what I like to hear! Glad the video was helpful! Definitely consider subscribing! New automotive 'how to' videos every Thursday and most Mondays!

@andrameda1 9 жыл бұрын

Very helpful thank you Chris!

@XxSNiBZxX 5 жыл бұрын

7:21 zmm zmm

@luphinus 5 жыл бұрын

Great instructional video! Clear, concise, and you take into consideration that not everyone has every specialty tool.

@kirkhepburnmiddleagedwhiteguy 6 жыл бұрын

Best video I've seen on the subject. The lighting, camera angles, and direct narrative explanation are excellent. Thank you for taking the time to post.

@kalemercer7053 4 жыл бұрын

I spent 2 years of my life in a E-coat paint factory watching, loading, and unloading parts on the line. I thing i see a few of them here too.

@moquadri08 9 жыл бұрын

hay chris thank you are very perfect explain good job .you guys makeing job easyer .

@chrisfix 9 жыл бұрын

Mohiuddin Quadri Thanks! I am glad the video was helpful!

@philipadcock3508 Ай бұрын

@chrisfix 9 years ago bro. 9 years.. I hope KZfaq has paid you well. You made a smart decision making these videos as a young guy. I’ve been watching for a while now.

@1947froggy 9 жыл бұрын

Nice video, great details. :)

@chrisfix 9 жыл бұрын

froggy New automotive 'how to' videos every Thursday and most Mondays!

@1947froggy 9 жыл бұрын

I'm subscribed, my channel is Froggy's Garage. :)

@WV591 9 жыл бұрын

where did you get the list of torque for this project? THX

@tammykeyser1254 7 жыл бұрын

Chris Fix! Man you just saved us a crap load of headaches! Your indepth videos really helped my son save about $700 from shops. We really appreciate everything you do. Keep up the excellent work!

@ng1400 10 ай бұрын

I know very little about vehicle repair/maintenance but I somehow ended up here after typing "how do ignition coils work" in the search bar. Awesome, video mate!! Very clear and concise for rookies like me. I just subscribed and will work through your videos in the coming weeks. Cheers for all the work you put into your videos.

@alphaomegaello 7 жыл бұрын

I see you got moog parts, I always buy moog for my suspension parts. always reliable

@chrisfix 7 жыл бұрын

Yea they are pretty good!!!

@bryankenwood3025 3 жыл бұрын

So you would know how much moog upper control arm n ball joint would cost, can you share that?

@MoparGuy1625 3 жыл бұрын

@@bryankenwood3025 or google it....

@bryankenwood3025 3 жыл бұрын

@@MoparGuy1625 I bought the moog upper control arms (2) n lower ball joints $250. Just got to find the time to install them.

@chrisfix 9 жыл бұрын

WV591 I get my torque specs from my service manual. But you can also just google your car year, make and model and what part you are looking for. And finally, your parts store should know the correct specs as well!

@rokin89 9 жыл бұрын

if you take the word from someone at a part store ,usually means 4 trips back to the part store do to wrong parts

@chrisfix 9 жыл бұрын

rokin89 A lot of times they might be able to pull up the torque specs on the computer. You just need to make sure they put the correct year, make, and model lol

@colemanadamson5943 8 жыл бұрын

+rokin89 Exactly my point in my comment today (9 months after yours). This video can hurt someone.

@alexlava8195 7 жыл бұрын

Coleman Adamson

@TheHamadanners 7 жыл бұрын

awsome

@HeavyInHawaii 7 ай бұрын

The ball joint press can be used screw side up to press the new ball joints in so you can use an impact drill on it. Great video, I have loved all of your content over the years.

@andrewhoskinson1487 7 жыл бұрын

Well that's one of the best instructions video I've come across yet! No B.S no music just great direction. Good on you

@braydnwensloff6197 6 жыл бұрын

Chris... u are the best diy mechanic out there. U make everything so clear and it is just amazing what u have taught me. I wouldn't be able to change a tire if it wasn't for u. Keep up the good work man!

@greenlungz 9 жыл бұрын

Honestly man, you did just as great of a job on the video as you did on the tutorial. You speak clearly and loud enough, there's no background noise, and it's very thorough. Very nice man, very nice!

@chrisfix 9 жыл бұрын

greenlungz Thanks for the feedback man! I am glad the video was helpful!

@AZTECHSOUL213 3 жыл бұрын

What a great instructional video! clear sound, editing, picture, and lighting. You are awesome, bro! keep up the good work.

@RESTORATIONRESCUE 3 жыл бұрын

This is an awesome video. I am just seeing this and it is awesome to see how far you have come to where you are now. Plus it makes me feel better that you started with the same type of tools as I have now and gives me things to look forward to.

@Pendaws 7 жыл бұрын

You sure do explain things well. There are many people who find it difficult to understand workshop manuals and your videos are very useful. It's a pity in Australia, you can't rent that removing tool for free. :(

@goonitunezperformance3155 2 жыл бұрын

I find it crazy that i watched this channel for years and now i own a 04 Ford Edge which is basically identical to his truck💯😂

@riclacrl 10 жыл бұрын

This video was very helpful for me. I am also planning on replacing all four of my ball joints on my avalanche. Thank you for posting.

@chrisfix 10 жыл бұрын

Great! Glad the video was helpful! Let me know how it goes! Also, remember to give the video a "thumbs up" (it helps me out, thanks)!

@riclacrl 10 жыл бұрын

Already gave the thumbs up!

@mariannerollins6144 2 жыл бұрын

Woman also appreciate your videos because we google stuff that mechanics say our vehicles need fixin. This way we have a good idea what they are talking about. Thnkyou

@editrento1 4 жыл бұрын

Great videos. Bravo on editing and plain speak tutorials 👏. It’s nice to see some one who knows what their doing.

@rsscarr 8 жыл бұрын

God you are informative. You really need your own show or something. You are very good at making things out as simply as possible. Keep up the awesome work man

@dariushfarhand4872 7 жыл бұрын

This is fantastic and thank you for all the work you do to educate people and all the tips!

@kevinhughesIT 4 жыл бұрын

I love your videos. I've learned so much from them. I'm new to fixing cars and these videos help so much. Thank you.

@keyg3n_ Жыл бұрын

cv axle blew out on the cr-v, figured id replace the lower ball joint as well so this video comes in handy bro! thanks for all the great content thru the years

@OscarGomez-bm3wh 8 жыл бұрын

IMO this is an excellent video; informative, perfectly shot and edited. I am not an auto mechanic but this video helped me understand the process. Being informed helps us, the regular citizens, to pay the fair price for this and, in general, just about any other repair (auto, home, personal services, etc.). My auto mechanic is an honest and well trained individual but it never hurts to remind him I already know what he is going to do. Thank you.

@chrisfix 8 жыл бұрын

+Oscar Gomez Thanks a lot! I am glad the video was helpful and informational!

@colemanadamson5943 8 жыл бұрын

+Oscar Gomez You're not an auto mechanic. Exactly. Therefore your opinion of this video is based merely on presentation, not accuracy. Don't try to show up your professional and honest mechanic. He will merely shake his head and laugh at you when you leave. UGH!

@johnralston5818 5 жыл бұрын

... Thanks Chris.. i know i can count on a video from you to refresh my old 73 y.o. mind on car maintenance. ( ... been a while tween ball joint replacement ; )... so Thanks Again & i'll see ya down the road.

@shaneluthy3041 3 жыл бұрын

The only thing that's changed in the last 6 years is the pace and tone in which ChrisFix talks. The quality is still 10/10, even for the early stuff like this. Doing it right the first time, every time.

@andresbatacan463 2 жыл бұрын

Your the best tutorial repairing cars.

@ernestoramoscruz73 3 жыл бұрын

I really like the way you explain every step of the process...you are a natural teacher...keep going...👍👍👍

@pave505676 9 жыл бұрын

Chris, fantastic video. After watching I feel very confident on doing the job myself. Not only are you very thorough, you offer great tips. Keep up the great camera work and thanks for the video.

@chrisfix 9 жыл бұрын

pave505676 Thanks man! I am glad the video was helpful! New automotive 'how to' videos every Thursday and most Mondays so stay tuned!

@therealchayd 6 жыл бұрын

Great and very informative video, thanks! One small thing; when loosening the hub nut, to avoid possibility of wheel bearing damage, it's a good idea to partially lift the car so you've still some friction to counter undoing the nut, but most of the load isn't on the bearing. This was from a VAG workshop manual. Don't know if it applies to other manufacturers. Just something to be aware of. I think it also may only apply to non-driven stub-axle types, don't remember 100%.

@resellerrunner5149 3 жыл бұрын

Thanks for making these videos Chris! I have more knowledge AND confidence to replace my lower ball joints on my 98 S10 now.

@samenta1972 2 жыл бұрын

I needed to change a ball joint and as always Chris is the man!!!

@inaznmismail2071 2 жыл бұрын

Just awesome .... Thanks man for all the valuable information and techniques you provides in your clips...you give the confidence for the average guy to take care of his vehicle. May Allah bless you more.

@liraziyad5806 6 жыл бұрын

ChrisFix! I am soo mad at you! You make is all look so darn easy all the time! I am sitting here breaking my finger nails, getting my hair snagged and yanked out and fighting stupid bolts that NEVER want to come out! Pulling out my Oxy torch to loosen stuff and rolling around in the dirt... That being said, I thank you for taking the time to make your videos so fast and to the point so that when I get stuck, I can fix it myself! Thanks for your videos...

@Cys62 7 жыл бұрын

enjoy all your videos... your explanations are very easy to understand and especially you are so energized in giving the explanation....

@toxic1venom 4 жыл бұрын

You're the best sir. I just purchased a ball joint press through your amazon link. I hope you get a little kickback or something from it to help support your channel. Keep up the great work. From Arkansas

@MTL514rosemontrep 8 жыл бұрын

Chris I love all your videos man! You're a truly great teacher, I just want to say thanks for sharing!

@chrisfix 8 жыл бұрын

pachanized Thanks a lot! I am glad you are learning a lot!

@davidtoro376 5 жыл бұрын

All I have to say is: just great!!!!!! Keep the wonderful job you perform.

@lenchast 9 жыл бұрын

One of the best and most informative videos I have ever watched. Always keep safety in mind and continue your good work.

@chrisfix 9 жыл бұрын

lenchast Thanks a lot man! I appreciate it and I am glad the video was helpful!

@alexjones8141 9 жыл бұрын

Thank you! Please continue doing these types of videos.

@scottketchum2224 6 жыл бұрын

Thank you Chris Fix, your demonstration helped me change my lower ball joint. I'm a diy guy and I've never changed one before and your video saved me a lot of $$$$ 🤣thanks again.

@Cos127 6 жыл бұрын

Thanks for all your videos ChrisFix! I was able to change out the lower ball joints on my 2007 Ford Ranger because of the help from this video. You Da Man!

@JUKE179r 6 жыл бұрын

Thanks for this in-depth video! I'm going to tackle mine this weekend on my 2001 Land Rover Discovery. Cheers mate!

@eldinpeterson3760 Жыл бұрын

just came across this you did a great job explaining what to do, hope you helped out people who need a little help .

@sikavac1 9 жыл бұрын

Exceptionally clear instructions, with all important tips & torque values. Video well lit.

@chrisfix 9 жыл бұрын

S. Pavlovic Thanks a lot! Glad the video was helpful and clear!

@jackrpool 8 жыл бұрын

To the point and super clear, thanks for posting this tutorial. Can't wait to tackle this with confidence. Cheers

@kvillaceran 2 жыл бұрын

See. Dede tee e e exxdexddexdddx wedded edsxdxdddeeddddedddd

@franci8766 2 жыл бұрын

Thanks for the step by step using tools any ordinary car owner may have in their garage. Looking forward to replacing 30 year old ball joints in my old pick up.

@jeffstone2601 10 жыл бұрын

excelente miro cada detalle y escucho cada sonido son muy buenos tus videos.. estas ultimas semanas he aprendido mucho con sus video lo que no aprendí nunca en la universidad.........gracias desde Colombia

@supernintendo7579 4 жыл бұрын

De nada mi amigo. Saludos. Aqui estamos. Pregunta lo que kieras.

@treydawgtrey Жыл бұрын

An actual thorough, easy to follow guide

@depcompanama4567 7 жыл бұрын

Excellent video, greetings from Panama. Best online instructor

@malan828 Жыл бұрын

I love how you show us how to clean before we work to.

@VansWorld 2 жыл бұрын

Definitely the best video I’ve seen 👍😁

@OldTimeReligion1611 4 жыл бұрын

What clear, concise instructions! I have just subscribed and will recommend to friends! Thanks so much!

@chrisfix 4 жыл бұрын

Welcome aboard! And thanks for sharing!

@jimbola77 6 жыл бұрын

thank you chris you are an excellent DIY mechanic saved me a lot of money!!!!!

@jardo531 8 жыл бұрын

This video was a great help to me when I replaced the ball joints on my trailblazer for the first time. Thanks for posting.

@chrisfix 8 жыл бұрын

jardo531 AWESOME! Glad the video was helpful!

@mwkeeler 9 жыл бұрын

As usual, your videos are super easy to follow. I removed my ball joints with a hydrolic press because one was available. Have the ball joint remover tool is just as easy. I would have replaced the upper ball joint too as it's ready to fail. When I replaced my ball joints on my Ford E150, I changed all the tie rods as it was just a matter of time before they failed.

@chrisfix 9 жыл бұрын

Mark Keeler Thanks man. I did replace the upper ball joint as well. It is one piece so you have to replace the whole control arm: How to Replace a Control Arm (upper or lower)

@reznha 5 жыл бұрын

perfect as always chris, nice job. i will do it tomorrow thanks for your video

@Ullikummi86 5 жыл бұрын

The brake cleaner did a good job. You cleaned so well the control arm is almost like new! @8:15

@davidb.fishburn9338 7 жыл бұрын

Chris, i'm a tech, and i think that your video is well done. A few tips, if you don't mind~ One, it's easier to handle the brake caliper and it's mount adapter if you take the entire assembly off of the rotor. You can hang it with a bungie cord or some wire, like you did with the axle. Two, put a jack under the lower control arm before disconnecting the knuckle. When the ball joint comes apart from the knuckle, the spring can still have a lot of force and will push the arm down rapidly. I see that your truck has torsion bars, but coil springs can be even more dangerous, since it is contained between the lower control arm and the frame. Three, i would put the grease fitting in last, after assembling everything, that would reduce the chance of breaking it and having to take everything back off to deal with the broken piece that would still be in the ball joint.

@chrisfix 7 жыл бұрын

+David B. Fishburn thanks for the tips!

@davidb.fishburn9338 7 жыл бұрын

You're welcome!