How to Replace an Upper Ball Joint

Рет қаралды 2,700,939

9 жыл бұрын

Upper Ball Joint Replacement. This video will show you how to replace the Upper Control Arm Ball Joint on a Chevy Trailblazer, GMC Envoy, etc. Replacing a ball joint is fast and easy and can be done with basic hand tools and a ball joint press you can rent for free at your local parts store. This ball joint is pressed but some are bolt on which is even easier.
Tools Used:
35mm Axle Nut Socket: www.amazon.com/gp/product/B002...
Ball Joint Press: www.amazon.com/gp/product/B002...
Torque Wrench I use: amzn.to/1N65Maz
Socket Set I use: amzn.to/1BlL0Tj
How to Press a Ball Joint: • How to Press a Ball Joint
How to Tell if a Ball Joint is Bad: • How to Check if a Ball...
How to Replace Upper Control Arm (Trailblazer): • How to Replace an Uppe...
How to Replace a Ford Upper Control Arm: • How to Replace a Contr...
The Part Website: www.mevotech.com/product/supre...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: kzfaq.info_c...
-KZfaq Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Пікірлер: 988

@markhillmah7321 4 жыл бұрын

I love seeing the old chris fix compared to the new one you can tell how he evolved in his youtube personality.

@jw11432 4 жыл бұрын

Was literally *just* noticing that. He is more animated in his speech now than he was here. It's necessary to be engaging, especially since he opts to not show his face, so his oratory skills must compensate for that.

@voidisyinyangvoidisyinyang885 3 жыл бұрын

I just started watching ChrisFix - the rhythm and tone of his voice is very soothing. I would have never thought a car repair vid could also be a relaxation vid.

@amcamc6623 3 жыл бұрын

G g gn. G. Gc

@bloqyutepa6432 3 жыл бұрын

I just thought the same thing, CHRIS THE SH*T!!

@_NoelNixon 3 жыл бұрын

Bro his style of speech changed in this video

@AFierce0ne 6 жыл бұрын

I swear, your videos are so satisfying to watch.

@assemagra9007 2 жыл бұрын

Thanks

@ClayFisher00 5 жыл бұрын

Did anyody else just keep re-watching the part where he breaks those lug nuts for the sound? Great video.

@bobsbarnworkshop7542 5 жыл бұрын

Chris Fix is the BEST on line how to fix your car guy! He shows ALL of the needed things and problems you can run into, not a quick short edited video where all the hard stuff is "magically" edited out and is done in an instant, far from real life! Thanks Chris Fix!

@richard1835 8 жыл бұрын

Excellent Teaching Video. This is great stuff! I run an Automotive Air Conditioning Business and need to take on extra work every now and then,so I try to learn as much as I can about Automobile Suspension Systems. Keep up the good work and I really appreciate your videos Chris. Thank you, Richard

@prathibhareddy3762 6 жыл бұрын

Richard Frank asccsAcsScS

@madmac66 7 жыл бұрын

Thanks Chris. I really appreciate all the different angles you show, and show any problems we might run into. You put a lot of effort into sharing your knowledge ands it's really appreciated. Cheers. Will be replacing control arm and ball joint on my wife's trailblazer in the new year. Which saves us hundreds of dollars and makes me look like a hero. Winning

@rarespace123 5 жыл бұрын

Your videos are so satisfying to watch. I love the way you edit the videos and explain the material. You make it look so simple. You are the reason why I started working on my car more often. I have learned so much because of your videos. Keep up the good work man.

@chrisfix 5 жыл бұрын

Thanks a lot!

@geeegeee 6 жыл бұрын

You make some of the best how-to videos.

@chrisfix 6 жыл бұрын

Thank you

@robloxsavagegirl2267 4 жыл бұрын

ChrisFix thank you Chris

@MrGW2fanboy 4 жыл бұрын

I dont think theres any competition, they are the best by a huge margin and I've watched so many DIY repair vids

@ManicMechanic007 9 жыл бұрын

The video detail and audio commentary on your videos is excellent. The time and effort you put into these demonstrations shows in the final product. For someone who professes not to be an expert, you are the farthest thing from it. I hope you continue with these repair videos Chris, they are outstanding. Thanks so much for sharing.

@chrisfix 9 жыл бұрын

ManicMechanic007 Thanks a lot for the kind words! They do take a lot of effort and time to make but comments like this make it all worth it! I will definitely continue to make these videos with new videos every Thursday and a bonus video most Mondays so stay tuned!

@danielceja395 7 жыл бұрын

Chris I have to tell you that your videos are so helpful, they give me the confidence to do most of the repairs to my vehicles my self. I am tires of mechanics that over charge for their work.

@chrisfix 7 жыл бұрын

That is the goal Daniel so I am glad to hear it!!!

@danielceja395 7 жыл бұрын

I am hooked on your videos! thanks for all the help Chris.

@ImTheRandomVideoGuy 7 жыл бұрын

ChrisFix Hello I wanted to ask you what do you use to edit your videos ! I would like to start a youtube channel for Hvac repairs but I don't know if I have to use any expensive editing programs or anything? If you could give me some tips I would really appreciate it !

@ishtiaqmushtaq4328 7 жыл бұрын

Daniel Ceja

@ishtiaqmushtaq4328 7 жыл бұрын

Daniel CSKA zero

@joshuamoore1091 3 жыл бұрын

Chris, your videos are so legit. You explain everything so clearly. You often explain how and why. You give complete concepts. You're a great teacher and I hope you are very blessed. Thanks for sharing your wisdom!

@chrisfix 3 жыл бұрын

Thanks a lot Joshua!

@patwhite8106 6 жыл бұрын

You have great videos. Explain things very well, you clip them to where there isn't a lot of wasted time between steps, and most importantly the camera doesn't move. You're awesome!

@upol92 9 жыл бұрын

Hi ChrisFix, I watched all your videos and they are really helpful. Can you please make a video on different types of common car problems and how to diagnose them ? Thank you.

@johnjohnoj6408 7 жыл бұрын

god bless u son, for helping us out here in utube land.

@rusuclaudiu1988 5 жыл бұрын

I really like the fact that you are tightening everything to a specific torque. This is a professional job, not done by the ear. Good job and thanks for your videos.

@workingmanGW 7 жыл бұрын

Awesome video and got to love the close ups and good camera quality. I like that you have the procedure in correct order. I am very confident I can pull it off now.

@keithsutton100 8 жыл бұрын

Chris, great job on the videos!! Not just useful but well presented and edited. Thanks for putting in the effort to make a quality video.

@chrisfix 8 жыл бұрын

+Keith Sutton Thanks a lot Keith!

@arshadabbas8812 7 жыл бұрын

ChrisFi

@StickNclutch 7 жыл бұрын

ChrisFix wow that job looks intimidating for the average guy and i bet expensive for the customers pocket ..very nice work subed

@edwinyanez6303 6 жыл бұрын

Hola Chris, me he suscrito a tu canal porque de verdad me has inspirado a realizar algunas cosas en mi camioneta Ford Ranger 4.0. Te felicito y seguire viendo tus videos....saludos desde Chile.

@adrianb2862 6 жыл бұрын

Keith Sutton hhhhh

@CaptMr 8 жыл бұрын

Awesome video, Chris. After only watching it once I feel like I could do this myself right now. Very descriptive and in depth, really hard to come by videos that are that way anymore. Keep it up!

@chrisfix 8 жыл бұрын

+CaptMr Thanks a lot! That is the goal!

@christianstevens4009 8 жыл бұрын

+ChrisFix thank u I was almost in a wreck when my balljoint went out

@bloomers72 6 жыл бұрын

Great job Chris. These are some of the best how to videos I have ever seen. The clear video pictures mean everything. Thanks

@danielspratling2684 6 жыл бұрын

I have to say I can't stop watching your videos. 1/2 of your videos I'm not needing to do but are interesting to watch. You are detailistic on your videos witch is 1 of the reasons I watch em. Great job.

@michaelsveneriksson4813 8 жыл бұрын

A++ Terrific You have made this job a breeze. I subscribed and will use your videos to help keep my 20 year old Ford Ranger 3.0 it top shape. Thanks so much.

@chrisfix 8 жыл бұрын

+Michael Sven Eriksson Awesome! I have videos specifically for the ranger so check those out too! Good luck and welcome aboard!

@ajgreen868 5 жыл бұрын

Your video saved my life tonight! Thank you so much for the detailed break down!

@obo7707 Жыл бұрын

You...are a good teacher. I see all the parts , you go over any concerns most people might have..very plain and simple. Thank you

@ericaviator8869 8 жыл бұрын

Just wanted to say your videos are some of the best production, detailed and most importantly, mechanically correct than most all the other DYI ers on You Tube. I use You Tube extensively and speak from experience as I maintain 4 vehicles ! In fact, I don't even own this vehicle, recognized your name, played it because I always learn new and useful applications,/techniques that apply to most vehicles! Thanks for your efforts ... and keep 'em coming ... we're saving thousands !!!

@xyzabc3659 4 жыл бұрын

Always fantastic, informative, confidence-building videos! Thank you. Question: any reason not to put anti-seize on the outside of the new ball joint before pressing it into the upper control arm (for ease of future removal)?

@descent8275 9 жыл бұрын

well explained! no mistakes and alot of detail! you sir, are going to be a pro!

@chrisfix 9 жыл бұрын

DESCENT Thanks a lot! I am glad you liked the video and it was helpful!

@mrmrjims3865 4 жыл бұрын

He's already a pro

@giridharg82 8 жыл бұрын

Did anyone else notice the video spanned from daylight to dark. Chris, you have a lot of patience considering you have to handle both the camera & tools. Respect.

@colincash1 7 жыл бұрын

ChrisFix thank you for you videos, you've changed the game bro!. Your videos have helped me save what I'm sure would equal a few thousand now in repairs to my 2000 ford ranger!. I came down to the garage to leave for work and my shifter had finally failed, running late now I took a deep breath pulled up your page and fixed the problem in 15 min!. I can't tell you the relief I felt and wished I could've shook your hand, after you've washed them of course!. Really though you are the man, keep the great videos coming, and whatever I can do as a subscriber to help you keep it going I'm in!. Thank you!.

@TechSeller 7 жыл бұрын

Great vids Chris! 1 of the best one the tube....Thank you Sir!

@JeanD88 8 жыл бұрын

hey Chris fix I want to start maintaining my own car instead of going to the mechanic for everything. Can you please do a video on all the tools a DIY guy like myself would need to work on most aspects of his car. thanks and your vids have been a great help, thanks a mill.

@junvargas8181 6 жыл бұрын

Jean Dorival

@harryl7946 6 жыл бұрын

Everything on the Snap-On truck for starters!

@mrjv750li 6 жыл бұрын

Harry Pouncey lol

@ghost2coast296 6 жыл бұрын

aside from your standard socket set, screw drivers, pliers, a combo wrenches and a hammer, which every adult should own regardless, you just pick up needed tools as the job calls for it, if you skimp and borrow tools you'll never have a nice set of your own.

@gangcai2876 5 жыл бұрын

I only buy tools, when I need. I don't think it is good idea to buy everything at once.

@fredcrowley3027 5 жыл бұрын

Chris, thank you I had no idea wha the mechanic was talking about, you made this easy and I was able to get the correct parts. You are awesome

@KFX89 7 жыл бұрын

You're amazing. I recently purchased a 2004 Mercury Mountaineer 4wd and I've been fixing certain parts, and I couldn't have done it without your videos. Very detailed. Two thumbs for you 👍🏻👍🏻

@chrisfix 7 жыл бұрын

Awesome! That is what I like to hear!

@Chizarules 9 жыл бұрын

Been using your videos as a walk through for fixing my heat/flushing my radiator, changing my rear drums which was a pain in the a$$, to general overall maintenance of my 97 dodge dakota, I recently got an alignment and a quote for winter tires and they said my upper ball joints are shot so I'm going to go ahead and replace both upper and lower to kill two birds with one stone. I need to pick up the tools and will tackle this project over the weekend with your video as well as my haynes manual.

@chrisfix 9 жыл бұрын

Awesome man! You are saving yourself some serious cash and you are learning a lot I'm sure! Let me know how it goes!

@nathanunderwaterguy 5 жыл бұрын

Does the 2011 Nissan Rogue SV AWD have an upper ball joint?

@michaelebbighausen3733 5 жыл бұрын

always loved your videos but a quick cheat to help in the future is align the grease fitting in the direction you think is easiest to get to it, I've seen some grease fittings that face a barrier of some sort so there is almost no way to get to it.

@chrisfix 5 жыл бұрын

Thanks for the tip

@braxtonthomas6194 5 жыл бұрын

Thanks for the hubcap lug nuts and tire removal demonstration. I would have been TOTALLY lost without it. Great video.

@chrisfix 5 жыл бұрын

Glad the video was helpful!

@georgemartinez8434 5 жыл бұрын

Chris fix is the man, Great video, great dismantle and installation, you make it look so easy, Great talk through and instructions!!!

@MrJack421 8 жыл бұрын

You really like tap on screwdrivers :D

@chrisfix 8 жыл бұрын

hahaha

@chrisfix 9 жыл бұрын

+Mark A. Bibbins, I cannot reply to your comment for some reason so I hope you see this. I have the video on how to replace the lower ball joint right here: How to Replace a Ball Joint (in depth, ultimate guide) and here is how to replace the upper ball joint (and control arm): How to Replace a Control Arm (upper or lower)

@DidiLeeReco 9 жыл бұрын

Of course it was very helpful! And all your videos are very helpful and great videos thanks! Man with that videos people save a lot of money DIY thanks again! 👍😊

@sakinabouhl2339 7 жыл бұрын

ChrisFix

@chasepayne3584 7 жыл бұрын

ChrisFix

@charliedominguez1135 7 жыл бұрын

ChrisFix howtoreplaceheatercoreona2002fordtourus

@jadac6109 7 жыл бұрын

isFix

@Luisunix 3 жыл бұрын

I´m surprised how clear you can teach. Marvelous, flawless!

@Mr.CarterJr. 7 жыл бұрын

Great video Chris, really like the two screwdriver tip,never seen that one before, thanks for all of your videos and tips on making things easier with basic tools.

@TomsLife9 6 жыл бұрын

14:29 those brake discs look gouged as frig

@atoka2206 5 жыл бұрын

So I need a Grease Gun Damn firearms are banned in my country

@Kavukamari 5 жыл бұрын

grease arms

@splsh8539 5 жыл бұрын

clever reference there

@cuphead8159 5 жыл бұрын

Not an m3a1 Grease gun

@tilleypatrickpt 5 жыл бұрын

😂😂🤣🤣 good one

@arroweyraud8267 5 жыл бұрын

@durp 16 i do and firearms arnt banned... Well that one is but most are not.

@bobmeoff1137 6 жыл бұрын

Excellent presentation. You allow no doubts to the beginner. You are a true educator!

@MrBiglog66 8 жыл бұрын

Excellent video! I'm just getting ready to change all four ball joints on my 2003 Trailblazer and this video and your lower ball joint video were very clear and understandable.........

@rubencedillo5422 8 жыл бұрын

the sandwich lol..

@nomanilyas943 4 жыл бұрын

This time You forget the gloves Bro...

@richard1835 6 жыл бұрын

Hey Chris working on a 2006 Trailblazer for one of my customers and replacing the upper control arms and upper ball joint. Want you to know that I am an Auto Mechanic but I find new stuff and techniques with you guys that post these how-to videos. Your videos are great and I appreciate them alot. Happy Easter.

@jeffreybrusch6448 8 жыл бұрын

THANK YOU ChrisFix!!! You make the best how to videos because you actually explain each step and give hints and pointers that you have learned over the years of experience that you have!! I ALWAYS prefer your videos to anyone else's if they are on the same subject! YOU ARE AWESOME!! And you literally just made my day!

@chrisfix 8 жыл бұрын

+Jeffrey Brusch Thanks Jeffrey! Glad I could make your day!

@kidwoohkidwooh 5 жыл бұрын

Dislike are mechanics yes good riddance to you scammers auto dealers

@butlerpep 4 жыл бұрын

Always wearing gloves....except when actually doing greasy work?

@flagmichael 7 жыл бұрын

ChrisFix, your cinematography is just plain awesome! I can't imagine how you got clear video with good lighting in places where there is so little room.

@chrisfix 7 жыл бұрын

+flagmichael thanks! It takes a lot of time but is worth it!

@mwwusa 9 жыл бұрын

Chris your videos are great. You have a very clear way of explaining things that has all the necessary info and is not long winded. Your video angles are fantastic, clearly showing exactly what you are doing and where. Your choice of topics is very good also. Really enjoy your videos. I know it takes a lot of work so thanks and well done.

@chrisfix 9 жыл бұрын

mwwusa Thanks a lot! I work hard to make these videos and comments like this make it all worth it! Thanks!

@Steveraxx 9 жыл бұрын

Of all the videos extant on this site, yours are the best. Clear, concise with excellent running commentary. Awesome stuff.

@chrisfix 9 жыл бұрын

Steveraxx Thanks a lot man! I really appreciate it!

@jacobkatari4512 7 жыл бұрын

ChrisFix you are the best, your vedios are professionally done, clear and precise.

@DonJuanzito 6 жыл бұрын

I can't believe how addicted i am to ChrisFix videos! They're all good!!

@majorredbeard 2 жыл бұрын

Fantastic video! You explained everything very clearly and showed each step, well done!

@anddtayl1 6 жыл бұрын

As always, nice video. This is definitely one of those jobs where you are just beat at the end (given it was the end of the day when you wrapped up). Nice job maintaining the same professionalism throughout the whole project.

@frankcastle7779 6 жыл бұрын

I have to do this to my trailblazer. I enjoy your videos but this was exceptionally helpful since it's a car I own. So now I know exactly what I need to do the job. Thank you!

@the-potato-warrior 4 жыл бұрын

I know I can figure this shit out on my own, and I have all the tools. But as a kinetic learner, these videos help me prepare for time allotted and assurance for what I need. Thanks man!

@pattymayo1000 5 жыл бұрын

Great videos! The presentation is easy to follow and not too presumptuous. Keep up the great work.

@johnodonnell3006 6 жыл бұрын

Great vid Chris, glad you posted it, because im going to do my first joint replacements, yup both joints, as soon as i get the press.

@JohnPaul-nv4pf 9 жыл бұрын

Great video! I love how he goes into detail without getting off topic.

@chrisfix 9 жыл бұрын

John Paul Thanks a lot John! Definitely consider subscribing! New automotive "how to" videos every Thursday and most Mondays!

@amandabrazell403 6 жыл бұрын

Thank you for your videos. I've wanted to learn to do things on my vehicle so I don't get overcharged by mechanics. Much appreciated.

@gmmpa8103 5 жыл бұрын

Very well produced. Great DYI content. Couldn't be better if it was done in Hollywood or Madison Ave. I'm an old time gear head. I appreciate all your videos. KZfaq is also a great DYI format.

@rjmar7553 7 жыл бұрын

The best step by step instruction I have ever seen. Great job, thank you Ron M.

@MrBasedSENSATION 9 жыл бұрын

Love your videos man. I don't even have any car troubles at the moment I just come to learn a lil something! Thanks a lot!

@chrisfix 9 жыл бұрын

smith. Thanks a lot! Nothing wrong with learning! Now you will be prepared if anything happens!

@UsmanKhan-jh4eo 5 жыл бұрын

I have seen 4-5 of ur videos of suspension parts fitting, it was that well explained that I already know how to assemble n dissemble it all with even the torque required against the nuts. Lol before watching these videos, I didn't even know how to jack a car 😂😂😂 great job Chris

@frankiet7148 9 жыл бұрын

Just wanted to say thank you for the well made video and great teaching, you are a gentleman and a scholar!

@chrisfix 9 жыл бұрын

frank t Thanks Frank! Definitely consider subscribing! New automotive "how to" videos every Thursday and most Mondays!

@Davidhuggar 9 жыл бұрын

Chris, I must say your how too mechanic video's have helped me a lot and saved me tons of money! Thanks, and your a great asset to the You tube community!

@chrisfix 9 жыл бұрын

David Last Great David! I am glad my videos have been helpful!

@pauldonovanvideo 6 жыл бұрын

Absolutely fantastic presentation and advice. Chris is a pro's pro!

@hunterparker69 2 ай бұрын

I love when I gotta do A job on a vehicle and I go to do research on how to do it and I find out the man himself ChrisFix made a video with the exact make and model that im working on. Just my luck thanks for the awesome video!

@savanalexis1947 5 ай бұрын

Man 😊your video is brilliant very detail and straight to the task.... Respect 🤝👍👍

@spiderweb365 2 жыл бұрын

Dude thank you so much I have used so many of your videos for help and you have saved me probably thousands of dollars thanks Chris fix

@edgarhernandez1060 4 жыл бұрын

With Chris Fix videos I work like a professional mechanic on my car, very good explanation step by step

@eyestunners Жыл бұрын

Excellent instructions and clear explanation. Your video saved me so much frustration. Thank you!

@TheGreenTucan 6 жыл бұрын

You made it look so easy! It took me 4 hours to do this. My ball joint was so stuck!

@aly8848 5 жыл бұрын

You are a life saver Chris. I am crying with gratefuless. I don't know what I would do without you.

@chrisfix 5 жыл бұрын

I’m glad the videos are helpful!

@gerardmiglino5057 4 жыл бұрын

Outstanding camera work everything is always so crisp and clear can see every detail and well spoken always the best videos and informative

@Jp-gw3tu 3 жыл бұрын

Just replaced the ball joint on my 1999 mazda mx-5 with ease, thanks to you Chris!

@jayti2234 7 жыл бұрын

Great video. I learned a lot about the upper ball joint and how to get access to it in the first place.😃

@josecerv4452 8 жыл бұрын

Man, your clips are soo good, it really make our mechanic lifes easy. thank you soo much

@chrisfix 8 жыл бұрын

+Jose Cerv Thanks! Glad the videos are helpful!

@bigdawg1872 2 жыл бұрын

Im 2yrs deep as a maintenance tech; looking 2 get my ASE for suspension next week. Im getting hands on experience but these videos really b coming in handy tho fr💯

@Dre-596 3 жыл бұрын

Trying to learn on how to do my own car jobs on my 63 impala i really do appreciate watching your videos something new i learned

@Mrtecko13 7 жыл бұрын

One of the best how to videos I've ever seen ... very helpful.. thank you

@chrisfix 7 жыл бұрын

Thanks Jordan!

@RobertoSantiagoRodriguez 3 жыл бұрын

Thanks for the video, Chris! I was under the impression that you would have to remove caliper and bracket and the rotor to be able to fit the ball joint press in there.

@amanjjanab 3 жыл бұрын

You're the best person who's got great information and learning, thank you very much.

@chrisfix 3 жыл бұрын

Thanks a lot Amanj!

@steveclark5357 8 жыл бұрын

you explain things so well, very good chris, thanks

@Bossrich6287 8 жыл бұрын

I've got a 94 Chevy S-10 and your videos are a big help.

@matthewward5849 4 жыл бұрын

I need to do this on my Jeep, not looking forward to it at all. But with the help of your videos, it makes this job a little less intimidating. So thanks ChrisFix

@deanmachine7971 7 жыл бұрын

My new favorite channel. Good stuff man!

@stanthology 8 жыл бұрын

Good instructions. Good editing. No mumbo jumbo. Clear reasons why. Good included information such as torque required. Clearly enunciated English!

@chrisfix 8 жыл бұрын

+stanthology Thanks a lot! I try to make all of my videos this clear and easy to follow!

@jimskatr103 4 жыл бұрын

Your level of explanation is on point!

@dimitriostsesmetzissr8845 6 жыл бұрын

This guy makes the best mechanic videos in you tube ...

@everardocamacho5063 6 жыл бұрын

Awesome chris, I being watching your videos this week, they all are great , I have learned a lot from them, thank again , cheers from Ontario ca.

@j.p.doublestrike3136 7 жыл бұрын

I am only 14 and I've learnd a lot from your videos

@thomasbretschneider779 8 жыл бұрын

Great video. You have a gift for explaining things extremely well to the layman. Thank you.

@tonyg3644 6 жыл бұрын

Just replaced the end links on my trailblazer, but I think the ball joint needs to be replaced as well. A little more complicated, but you make it look easy. Wish me luck and Thanks you for the videos you post!!

@chrisfix 6 жыл бұрын

Good luck!