Shop for New Auto Parts at 1AAuto.com 1aau.to/c/93/aY/direct-fit-cat...
This video shows you how to install a new TRQ direct-fit bolt up catalytic converter assembly on your 2003-2007 Honda Accord. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.
This repair was done on a 2006 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• 13mm Socket 1aau.to/obGd/1AXAA00015
• 14mm Socket 1aau.to/obGd/1AXAA00015
• 15mm Socket 1aau.to/obGd/1AXAA00015
• O2 Sensor Socket
• 1/2 Inch Ratchet 1aau.to/oaox/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/obkP/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obGd/1AXAA00015
• Torque Wrench 1aau.to/oaNQ/1AXAA00044
• Gloves 1aau.to/oapL/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oacU/1AXAA00068
• Jack Stands 1aau.to/oZz/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/ouq/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Honda Accord 2003-2007 7th Gen: • Honda Accord 2003-2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.