Рет қаралды 2,012
Buy Now!
New Catalytic Converter and Pipe Assembly from 1AAuto.com 1aau.to/ia/1ACCD00730
This video shows you how to install a new catalytic converter & pipe assembly from TRQ on your 2010-2014 Subaru Outback 2.5L H4.
This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback
Tools you will need:
• Pry Bar 1aau.to/o8s/1AXAA00020
• 14mm Wrench 1aau.to/oacg/1AXAA00010
• 22mm Wrench
• 14mm Socket 1aau.to/ob5L/1AXAA00015
• O2 Sensor Socket
• Push Pin Pliers
• Ratchet 1aau.to/ob7v/1AXAA00016
• Gloves 1aau.to/oa2U/1AXSS00048
• Safety Glasses
• Sandpaper
• Surface Prep Discs
• Floor Jack 1aau.to/oawi/1AXAA00068
• Jack Stands 1aau.to/oaij/1AXAA00065
• Pick 1aau.to/o29/1AXAA00037
• Razor Blade / Gasket Scraper
• Sanding Block
• Vise
• Wheel Chocks
• Wire Brush 1aau.to/oxU/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.