Buy Now!
New Catalytic Converter and Pipe Assembly from 1AAuto.com 1aau.to/ia/1ACC...
This video shows you how to install a new catalytic converter & pipe assembly from TRQ on your 2005-2010 Toyota Tacoma (2.7L L4).
Estimated installation time for a professional technician is approximately: 1 hour 12 minutes
This repair was done on a 2010 Toyota Tacoma Base 2.7L Standard Cab Pickup 2-Door 4WD Manual and the process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obIs/1A...
• 14mm Wrench 1aau.to/oaeC/1A...
• 16mm Wrench
• 22mm Wrench
• 14mm Socket 1aau.to/ocbt/1A...
• 16mm Socket 1aau.to/ocbt/1A...
• O2 Sensor Socket
• Trim Tool Set 1aau.to/oazJ/1A...
• Pliers
• Wire Cutters
• Ratchet 1aau.to/occB/1A...
• Torque Wrench 1aau.to/obeT/1A...
• Gloves 1aau.to/obca/1A...
• Rust Penetrant
• Safety Glasses
• Wire Ties
• Floor Jack 1aau.to/oaz6/1A...
• Hammer
• Jack Stands 1aau.to/oamT/1A...
• Pick 1aau.to/o4L/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/oyG/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.