Рет қаралды 28,671
Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00251
This video shows you how to install an engine water pump on your 2008-2012 Honda Accord. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• 10mm Wrench 1aau.to/oa6/1AXAA00010
• 14mm Wrench 1aau.to/oa6/1AXAA00010
• 12mm Socket 1aau.to/oeQ/1AXAA00015
• 14mm Socket 1aau.to/oeQ/1AXAA00015
• 19mm Socket 1aau.to/obX/1AXAA00043
• Trim Tool Set 1aau.to/obt/1AXXX00006
• 1/4 Inch Ratchet 1aau.to/oed/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oeQ/1AXAA00015
• Torque Wrench 1aau.to/ocP/1AXAA00044
• Gloves 1aau.to/oY/1AXSS00048
• Safety Glasses 1aau.to/oR/1AXAA00343
• Drain Pan 1aau.to/o7/1AXAA00320
• Funnel 1aau.to/or/1AXAA00310
Subscribe: / @trq
Check out our playlist:
Honda Accord 2008-12 8th Gen: • Honda Accord 2008-12 8...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.