How to Replace Front Brakes 10-17 Chevy Equinox

Рет қаралды 43,088

Күн бұрын

Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ia/1ABFS03799
This video shows you how replace the old brakes on your 10-17 Chevy Equinox with new, quality TRQ parts.
• Check here for more videos on the 2010-17 Chevy Equinox: • Chevy Equinox 2010-201...
This process should be similar on the following vehicles:
2010 Chevrolet Equinox
2011 Chevrolet Equinox
2012 Chevrolet Equinox
2013 Chevrolet Equinox
2014 Chevrolet Equinox
2015 Chevrolet Equinox
2016 Chevrolet Equinox
2017 Chevrolet Equinox
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obs/1AXAA00013
• Pry Bar 1aau.to/oU/1AXAA00020
• 10mm Wrench 1aau.to/oR/1AXAA00010
• 14mm Socket 1aau.to/obe/1AXAA00015
• 18mm Socket 1aau.to/oaf/1AXAA00043
• 7/8 Inch Socket 1aau.to/ob/1AXAA00042
• Complete Torx Bit Set 1aau.to/oB/1AXAA00008
• 1/2 Inch Breaker Bar 1aau.to/oq/1AXAA00078
• Ratchet 1aau.to/obF/1AXAA00016
• Brake Grease
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags 1aau.to/oC/1AXSS00035
• Drain Pan 1aau.to/oz/1AXAA00320
• Large C-Clamp
• Pick 1aau.to/oF/1AXAA00037
• Sledge Hammer 1aau.to/oQ/1AXAA00091
• Wire Brush 1aau.to/ov/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Chevy Equinox 2010-2017 2nd Gen: • Chevy Equinox 2010-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 15

@TRQ 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@patd1961 2 жыл бұрын

Great video. Trick for cleaning rotor. Put on backwards. Clean. Turnaround. Install n clean front side

@bakermark6891 3 ай бұрын

After watching a few videos, this one actually explain the bleeder nut to ease pressure on the piston. And how it could effect the ABS system. Good tib bit!!! Awesome! AWESOME!!! Also, i wasnt setting my hardware even causing it to rub against the rotor! So, i made damn sure they both were on point

@cornonthecob1268 Жыл бұрын

Excellent video! Thank you!

@TheTabwinner 4 күн бұрын

What about refilling the master cylinder ?

@spettro9 Жыл бұрын

Nice, a few nice tricks... Thank you! but grease... on the torque plate/caliper bracket bolts..? I thought one/I always use a little blue loctite actually... Certainly I torque it down as well.. (I guess at 140 ft/lbs it's ok.....)

@juggernaut8647 Жыл бұрын

How long did you leave the c clamp on the caliber before taking it off ?

@nevets000 2 ай бұрын

Great video thank you much.

@mohamedgeelqaad4741 3 жыл бұрын

Thanks my friend

@papabits5721 Жыл бұрын

Always great videos

@patd1961 2 жыл бұрын

No grease to backside of pads?

@carlitos12121 8 ай бұрын

How break free the rotor from the shoes i

@patd1961 2 жыл бұрын

What size was torq bit for rotor?

@patd1961 2 жыл бұрын

T30

@johnsteele8073 4 ай бұрын

You squeeze the caliper before you remove it. Trying afterwards is bizarre. No reason to remove the bracket unless youre putting new rotors on. Waste of time. Dont use a screwdriver to remove the boot its almost a guaranteed tear and future repair.