How To Replace Front Brakes 2007-Present Toyota Tundra

Рет қаралды 91,027

Күн бұрын

Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ia/1APBR00995
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brakes on your 2007-Present Toyota Tundra.
• Check here for more videos on the 2007-Present Toyota Tundra: • Toyota Tundra 2nd Gene...
This process should be similar on the following vehicles:
2007 Toyota Tundra
2008 Toyota Tundra
2009 Toyota Tundra
2010 Toyota Tundra
2011 Toyota Tundra
2012 Toyota Tundra
2013 Toyota Tundra
2014 Toyota Tundra
2015 Toyota Tundra
2016 Toyota Tundra
2017 Toyota Tundra
2018 Toyota Tundra
2019 Toyota Tundra
2020 Toyota Tundra
2021 Toyota Tundra
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oSj/1AXAA00013
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oy/1AXAA00278
• Brake Caliper Hanger 1aau.to/obU/1AXAA00084
• Straight Cutters
• 3/8 Inch Air Impact Gun
• Socket Driver
• Torque Wrench 1aau.to/oAZ/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/ohC/1AXSS00035
• Rust Penetrant
• Center Punch 1aau.to/oc4/1AXAA00055
• Floor Jack 1aau.to/opw/1AXAA00068
• Hammer 1aau.to/ook/1AXAA00091
• Jack Stands 1aau.to/on8/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/oeW/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Toyota Tundra 2nd Generation 2007-Present: • Toyota Tundra 2nd Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 56

@TRQ 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@jasoncalvert6082 Жыл бұрын

"You're going to wanna clean the hub." Puts on a new hub. Lol

@thekingsway295 Жыл бұрын

Absolutely superb video! Precise instructions, clear photography of the work being done and straight to the point. Didn't have to listen to meaningless chatter. This is how a good video is made!

@TRQ Жыл бұрын

+The King's Way Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@peterschichtel7710 2 жыл бұрын

Thank you for this video. It made the process very easy. I watched it a couple times before attempting to do it, but it was one of the easier brake jobs that I have done. I went and bought pads and rotors this morning and was going to replace them this afternoon. My wife wanted to help me and give a local mechanic some business, so she got on Facebook and looked for a mechanic to do it. One offered to do the job for $120 if we provided the parts. Just after starting the job, the person she hired came to the front door and informed us that there was fluid coming out of the caliper. He was unbolting the 4 bolts that actually keep the caliper together. He did not know how to remove the pads or caliper and didn't think that you had to remove the caliper to replace the rotors. I knew at that point he had no idea what he was doing. I stopped him and asked him to put the bolts back in, and the tire back on. He left and I rewatched the video and did the job. Thank you again.

@bizzybone415 Жыл бұрын

Thank you for your video. Just changed my front breaks. Your video was my go to. Keep up the great work.

@kokok3479 Жыл бұрын

Simple, clear tutorial. Thanks, brother. Gotta order my pads now.

@beverlyboys73 2 жыл бұрын

Very clear instructions. Great work. Thanks

@ericwashington4470 Жыл бұрын

Great video Sir, please keep up the good work, very informative for us DIY guys.

@Bicyclefarms 2 жыл бұрын

This was very helpful. Thank you! My retainer bracket was on the bottom, not the top of the caliper. Does it matter where it goes?

@antoniowade3318 2 жыл бұрын

Nice video, really detailed this operation.. Thanks Wade Out..

@rchaser4 2 жыл бұрын

Nicely done, clear, concise.

@davewetherell9277 Жыл бұрын

Can’t get no better than this! Thanks!

@carloalvarado5241 Жыл бұрын

Excellent video, pro at work!

@raymondgutierrez4191 Жыл бұрын

Very simple and looks easy. Just need the right tools. 👏👍

@ericolson6669 Жыл бұрын

Great video. To the point. No backstories!

@palace7614 3 ай бұрын

thanks for the video. one question a2007 tundra caliper can fit on a 2007 toyota prado120 thanks very much

@TROD760 11 ай бұрын

Awesome vid. would you suggest always replacing the rotors when changing out the pads? I noticed my pads are pretty thin, but the rotors seem fine.

@Krackerjax00 2 жыл бұрын

Awesome video

@vdubplate 2 жыл бұрын

whats the name of that tool to push the pistons apart

@JosSerr-mw9fc 2 ай бұрын

I have a set of brake pads in the truck from when i bought it and today i started changing them, but i noticed the new ones are a bit smaller, is there any problem installing them like that or do they have to be snugged in on the top and bottom of the calliper? They're aftermarket stuff. Everything fits, its all installed but the pads got a bit of a gap on the top and the bottom of the caliper.

@sneakerguy2430 Жыл бұрын

I changed the disks and pads on my dad's tundra and cse I'm a noob at mechanics opend up the caliper and brake fluid came out. I didn't loosen the brake line or abs. Put everything back together and now we have to press all the way down to the floor to brake. Any ideas why??

@matthewduncan5419 2 жыл бұрын

What about the shims? Where are the gyms did you not buy Toyota brake pads? Or is this one a auto pads I don't know what it is

@jmlriggins Жыл бұрын

Where u find that tool for brakes pad

@cheyennereynoso4116 Жыл бұрын

What’s that first clip for? The curly one? To hold the pad? I don’t see why it’s necessary? It doesn’t hold the pins in does it?

@andreward8268 6 ай бұрын

Awesome video!!!!

@lowrider0two Жыл бұрын

This was awesome are you free this Saturday lol 😆

@arnoldarriola2171 2 ай бұрын

Thank you!

@Bicyclefarms 2 жыл бұрын

Caliper grease, lol. Had to look it up. At first I thought you might find it with the elbow grease. 😂

@user-zd4fx5ky2t 8 ай бұрын

Thanks create help full now I can do it

@rc846 Жыл бұрын

@ 3:25 should you make sure the brake fluid reservoir lid is off?

@timsetliff3214 11 ай бұрын

Great video, but i noticed you went from stock rotors to slotted rotors, need to make sure they are facing the right direction.

@reedmurphy4929 4 ай бұрын

Do you have to use the anti seize and the lubricant?

@hellothere8972 2 жыл бұрын

SO its the same from 2007 to 2021 ?

@josephwhite3153 2 жыл бұрын

Do you need to bleed the brakes?

@angelmorales7468 2 жыл бұрын

what size the bolt that you used to push the rotor free?

@vdubplate 2 жыл бұрын

M8x1.25

@azg3ranch239 2 жыл бұрын

Where can I find the caliper tool you used? Thanks!

@Bicyclefarms 2 жыл бұрын

I got mine at Advanced Auto. It was 53 bucks.

@ARes13FOX 2 жыл бұрын

Just leave the pads in. And use 2 screw drivers or pry bars as leverage against the pads at the same time. Works like a charm

@patrickdubuc3439 Жыл бұрын

No shims??

@minchi3332 Жыл бұрын

What’s the bolt to remove the rotor?

@abosworth 2 жыл бұрын

Great video, as usual. With that said, I really don't like the design of these brakes. Those clips are just ridiculous. 😂

@TRQ 2 жыл бұрын

+Adam Bosworth Thanks for watching our video! 1aau.to/m/Shop-TRQ

@sylverbullit7192 2 жыл бұрын

Do all the clips need to be reinstalled?

@tommymakem2611 2 жыл бұрын

@@sylverbullit7192 Unless you'd like to have no front brakes, yes.

@AlexRodriguez-jt6ho 2 жыл бұрын

If I have someone swap the brakes and rotor what should it cost me.?

@AltoTheGod 2 жыл бұрын

About $220 for parts and maybe $200 for labor

@Bicyclefarms 2 жыл бұрын

My rotors alone were over $500

@Froggies505 2 жыл бұрын

My brakes were almost completely opposite from what you showed and that’s from the dealer I bought it from haha

@patrickpatrick9132 2 ай бұрын

No way the tire came off that easy 😂

@jzeke1712 2 жыл бұрын

The “torqued” 👍🏻 at the end was pretty funny. You didn’t tighten any of those lug nuts with the torque wrench, all you did was show they were already at some unknown and possibly very over torqued tightness.

@666dynomax Жыл бұрын

Kinda how I do it lol

@luvpostrock69 Жыл бұрын

There's always a critic somewhere.

@Snapster911 Жыл бұрын

They were already torqued, usually there’s a tiny bit of play before the click, you don’t run ‘‘em down with a impact, you only use the impact to get the lug going as close as possible without actually seating the lug, the the torque wrench will finish the job to its recommended torque spec.