Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ia/1ASLF00257
This video shows you how to install new control arms in your 2001-2007 Volvo V70. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2001 Volvo V70
2002 Volvo V70
2003 Volvo V70
2004 Volvo V70
2005 Volvo V70
2006 Volvo V70
2007 Volvo V70
Tools you will need:
• Pry Bar 1aau.to/tGf/1AXAA00020
• 21mm wrench
• 18mm Socket 1aau.to/t77/1AXAA00043
• 19mm Socket 1aau.to/t77/1AXAA00043
• 1/2 Inch Air Impact Gun 1aau.to/tnC/1AXAA00252
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/taY3/1AXAA00016
• Torque Wrench 1aau.to/tae3/1AXAA00044
• 6mm Allen Wrench 1aau.to/tbU/1AXAA00007
• Hammer 1aau.to/tJe/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.