How to Replace Front Upper Control Arm 06-10 Ford Explorer

Рет қаралды 40,417

1A Auto: Repair Tips & Secrets Only Mechanics Know

7 жыл бұрын

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASFU00123
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged upper control arms. This video is applicable to the 06, 07, 08, 09, 10 Ford Explorer
This process should be similar on the following vehicles:
2006 Ford Explorer
2007 Ford Explorer
2008 Ford Explorer
2009 Ford Explorer
2010 Ford Explorer
🔧 List of tools used:
• Pry Bar 1aau.to/oFa/1AXAA00020
• Complete Metric Wrench Set 1aau.to/oHm/1AXAA00010
• Complete Metric Socket Set 1aau.to/oVX/1AXAA00043
• Pickle Fork
• 1/2 Inch Breaker Bar 1aau.to/oou/1AXAA00078
• Ratchet 1aau.to/oa6y/1AXAA00016
• Gloves 1aau.to/orD/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/omR/1AXAA00343
• Floor Jack 1aau.to/oLg/1AXAA00068
• Hammer 1aau.to/oH4/1AXAA00091
• Jack Stands 1aau.to/oIG/1AXAA00065
Subscribe: / @1aauto
Check out our playlist:
Ford Explorer 2006-2010 4th Gen: • Ford Explorer 2006-201...
Ford Auto Repair Videos: • Ford Auto Repair Videos
For More Info visit us at 1aau.to/h/btT/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 19

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@neomatrixfree3627 3 жыл бұрын

Any able bodied person can do this thanks to you guys! I am going to buy my ball joint and control arms from y'all to support your videos! Thanks!

@gudmundurp67 5 жыл бұрын

Bless you for those videos.... totally brilliant. Cleard a wheel alignement issue I was lost in after changing UCA. on 6:00 -6:50 in this one :-)

@emmanuelcastillo8782 2 жыл бұрын

Is it possible to replace only the ball joint?

@sandycharlton8669 3 ай бұрын

You guys just saved me $300

@gabrielrosales4699 2 жыл бұрын

2022 January and this video is great!!!!!! able to replace both Control Arms....

@pxods 15 күн бұрын

Thank you

@BMWE90HQ 2 жыл бұрын

I got one from a local parts store and the ball joint is off to the side. It is seated properly in the control arm but the bolt is off and like a 30 degree angle while the drivers side was essentially vertical. Is that okay or is it defective?

@skateminilogo18 8 ай бұрын

What do I do if the stud is spinning in place!!

@bryersellers4299 3 жыл бұрын

Can you make one for a 2003 ford explorer sport my upper control arm on the driver side needs redone

@1AAuto 3 жыл бұрын

+Bryer Sellers We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

@pinpom774 5 жыл бұрын

Make a video whit the lower control arm please

@1AAuto 5 жыл бұрын

+Miguel Hernandez That video is located here: www.1aauto.com/how-to-replace-front-lower-control-arm-06-10-ford-explorer/video/12285

@KENTONCATRACHO Жыл бұрын

When you change the upper control arms you have to do alignment?

@eegg6954 Жыл бұрын

Nice video! Two tips: Mark the location of the control arm nuts with a paint pen before loosening. (See 6:20) The holes are slotted for caster/camber alignment and by marking the nut location, you can hold the alignment. This only works if you use USA-made OEM Motorcraft control arms, which are identical to the originals. Use some China junk and all bets are off... and you'll be doing it again in eight months.

@lavontreivey7003 3 жыл бұрын

How much is total for this replacement

@lavontreivey7003 3 жыл бұрын

@eegg6954 Жыл бұрын

USA made Motorcraft part is $70; China part is $20. Dealers get $575 for this installed in NYC.

@wakcedout 3 жыл бұрын

oof, these jobs look easy but 1 you have the luxury of lots of space around the vehicle and a lift, and 2 it looks like you guys are based outside of the rust belt judging by the ease these bolts break free. that and when i hear lift to ride height or get an alignment, im just ya know i got a guy who can do this lol.