Рет қаралды 257,772
NOTE: Clutch plates need to be coated in oil. I soaked them after reassembling everything, add the engine oil and ran the engine for 10 minutes so the clutch becomes oiled. No need to soak them overnight. Old wives tale. Cheers!
This is a walkthrough guide on clutch replacement and even oil change. I hope you find this video helpful and enjoyable, if you do please subscribe for more! Support me on my mission to make cinematic builds and tutorials! Occasionally CineVlogs.
Smoking, jazz, and doing my regular maintenance on my bobber. Here's a short film tutorial on how to replace the clutch disks on a Honda Rebel motorcycle. I'm using my bobber as reference but this applies to most bikes out there. I hope this helps!
YOU'RE WELCOME:
bit.ly/2neytR2
MORE VIDS:
Honda Rebel Bobber Project - In the Making:
• THE HONDA REBEL BOBBER...
How to change Honda Front Brake Pads:
• HOW TO REPLACE HONDA F...
TORQUE SPECS:
- Clutch Lifter Bolts: 9 ft-lbs (108 in-lbs)
- Spanner (Castle) Nut: 54 ft-lbs (648 in-lbs)
PARTS & RESOURCES:
- Spanner Nut 24mm:
www.amazon.com/gp/product/B00...
- Friction Clutch Plates:
www.amazon.com/gp/product/B00...
- Springs:
www.amazon.com/gp/product/B00...
- Oil Used:
I used 10w-40 type
Manual calls for 1.6 quarts which is between the min/max of dipstick
- More About Oil Type:
www.rebel250.com/rebelforum/vi...
FILMING GEAR:
Canon Rebel t3i