How to Replace Ignition Starter Switch 95-96 GMC K1500
Рет қаралды 343,513
Buy Now!
New Ignition Starter Switch from 1AAuto.com 1aau.to/ia/1AZIS00005
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, worn or faulty ignition starter switch. This video is applicable to the 95, 96 Chevy or GMC C/K pickup trucks.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oapB/1AXAA00013
• 21mm Socket 1aau.to/otc/1AXAA00043
• 7mm Socket 1aau.to/o2B/1AXAA00017
• Side Cutters
• Snap Ring Pliers
• E5 Socket
• T25 Driver 1aau.to/ote/1AXAA00008
• Ratchet 1aau.to/oarb/1AXAA00016
• Wire Ties
• Pick 1aau.to/oiP/1AXAA00037
For More Info visit us at 1aau.to/h/bsn/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
@1AAuto 3 жыл бұрын
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@PacoOtis 2 жыл бұрын
Excellent presentation! I was an instructor for thirty years and don't believe I ever heard anyone as articulate as you are. There was not a single pause, such as searching for a word and your pace was perfect. You should be a college professor! Our situation is a bit different in that the engine will not turn off, even with the key removed. We disconnected the battery to shut down the engine and, also, the panel lights were remaining illuminated. Best of luck from out here in Idaho and we definitely owe you a beer!
@Irotten 3 жыл бұрын
My 1996 K1500 had was not shifting, the Tach/Speedometer quit and the gear indicator was out. Ordered this part and replaced the starter switch and it fixed it all. The video is spot on. A couple things to add. No need to remove the snap ring. While not necessary to remove the steering wheel it really gives you room to work if you do. Also pay attention to the direction he is using the screwdriver to remove the airbag. The E-4 star bit can be found at O'riley auto parts. They are a slender 1/4 inch drive socket set of 5 and will fit to take off the two screws holding the switch on. Disassembly took a few because I had never done it but reassembly only took about 30 minutes. Not that hard to do and will save you money by not having someone else do it.
@5150on420 3 жыл бұрын
Removing the steering wheel and messing with the airbag is an unnecessary step while replacing the ignition switch. The rest of this video is step-by-step exactly how the process should be done.
@kicknsystm 2 жыл бұрын
I was wondering about that. I replaced the key/tumbler assembly without pulling the wheel so I was going leave it unless necessary on this little job too. I was actually going to comment/inquire about it until I saw your post. Thanks.
@dannyezell481 2 жыл бұрын
Just changed mine on my 95 chevy 1500 the part you shipped fit just like the original. Thanks for great service
@DannyKellaher21 6 жыл бұрын
Great video! Helped me a lot especially with the key cylinder. Skip removing the steering wheel, no need even with airbag(mine has one). Also, if you are patient and careful, you can open the switch and clean the contacts and reassemble. Worked for me and saved $120.
@ken2gill 4 жыл бұрын
This video saved my ass! Thank you sooo very much! Got in my truck and all of a sudden no windows, wipers or break lights also radio and climate dead. All fuses good, swapped ig switch and boom all good!
@1AAuto 4 жыл бұрын
+ken2gill Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@jdwxly 2 жыл бұрын
Outstanding level of detail and clarity on how to access things that are hard to video. Thanks for a great video!
@greenboyatgafarms2250 5 жыл бұрын
Great video I have done this for years and years professionally turning wrenches and only thing that I stopped at what's the key tumbler sensor other than that I did not take off most of what you did that was the only thing I came to this video for thanks a lot for your help👍👍👍
@1AAuto 5 жыл бұрын
+GreenBoy at GA Farms Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
@jasonandmichellec.5051 4 жыл бұрын
E-sockets are a must...clock spring snap ring doesn't need removed. I also replaced my steering wheel with a next to new model. Great vid
@danhammond8406 3 жыл бұрын
If your having transmission trouble, check fuse 20 in the dash fuse pannel. If theres no power supplied to that fuse then your ignition switch has failed.
@1AAuto 3 жыл бұрын
+Dan Hammond Thanks for the feedback!
@winford31 7 жыл бұрын
Very good video ! You're right, you must have an E4 inverted socket to get those 2 screws on the top switch. My old harness had a pinched white wire ,probably my fuel pump hot wire, will see if this fixes it- thanks 1AAUTO !
@1AAuto 7 жыл бұрын
+Hank Postell Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/ignition-starter-switch/i/1azis00005?KZfaq&CTA+Comment&YwLg3JYOYYA
@84montecarlonazi 4 жыл бұрын
E4 or e5 inverted torx bit cause discription days e5
@brianmccoy8188 4 жыл бұрын
Would this part help stop the security light on a 1999 Chevy Tahoe from coming on? Or is it the cylinder that needs to be replaced? Been having a issue with security light staying on or even flashing at some point. Have to wait 10 minutes before I can start up... Plz help
@jaredricks3601 5 жыл бұрын
Instead of removing the steering wheel, I opted to remove the Driver side seat. Made it somewhat more comfortable. The E4 deep socket is a must.
@mid-west_man 5 жыл бұрын
I just removed the top and bottom covers. The seat bolts are rusted, live in the Midwest.
@hicksfred73 2 жыл бұрын
Your video's have helped me a few times thanks for the great info you provide
@applehead252 2 жыл бұрын
Exactly what I was looking for ! Could not figure out how to get top off! That’s cause u can’t until releasing the ignition switch ! I was about to cut . Glad I didn’t. Thanks so much !
@donaldlong9689 6 жыл бұрын
Did you install the retaining clip o nthe steering wheel? Must the E4 torx be deep style?
@myronstambaugh761 Жыл бұрын
Great video, as usual from 1A Auto! It appears they replaced the clock spring in this video but did not detail the work on that part. That is the only reason the wheel and the snap ring on the clock spring would need to be removed.
@SuperJkeaton 5 жыл бұрын
Fixed the issue with my truck. Tach was not working, speedo was stuck on 100, check gauges light on, gear indicator out, transmission could only be shifted between 2nd and 3rd manually. Thanks for the video. You WILL need a 4mm female torx socket for the steering wheel part of the switch. Start to finish, took me about 3 hours. I did not remove the steering wheel.
@1AAuto 5 жыл бұрын
Thanks for the comments and for watching! +Kent Eaton
@MrLawrence7777 6 жыл бұрын
This Video REALLY HELPED ME. THANKS FOR THE UPLOAD🏆 👏😎
@1AAuto 6 жыл бұрын
+MrLawrence7777 Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
@jorgesoto1231 3 жыл бұрын
Hi on my 97 Chevy c1500 I broke the key censor that goes inside the switch housing. Can I use it with out the censor or is ther a repair for just the small plastic censor
@richardnewby9755 4 жыл бұрын
Will a bad ignition switch no engine light to come on? Cause noticed when check enginge light is on it starts just fine
@obs4life228 2 жыл бұрын
Ok so any help would be appreciated.. my 96 Silverado gets stuck in crank mode while cranking the truck. It cranks up just fine but the key gets stuck in crank mode. I’ve already replaced the ignition key and lock cylinder and door locks with one from 1a auto. I thought that would fox the problem but it didn’t so I was wondering would this ignition switch fix the problem?
@MinnesotaisRust 10 күн бұрын
Super helpful-thanks!!
@Iloveyhwh_1974 Жыл бұрын
Another great, thorough tutorial. My son’s 98 Silverado keeps poppin’ the “IGN-1” fuse (@fuse box under hood). I’ve inspected the fuse box and the underneath side, no signs of burns or corrosion. Could a faulty ignition switch assembly be the culprit? Or, is there something else I should investigate. Thanks.
@kcyasharahla3844 5 жыл бұрын
There's another harness for the switch that also has another snap plug that plus into the top of the ignition that looks exactly the same as this one. I pulled 2 today from the junkyard. Easy peezy after you do it a few times
@wooffirestart4942 4 жыл бұрын
Do you need to replace the wiring when just replacing the ignition switch?
@mysh2.036 3 жыл бұрын
i have a 95 with no tilt!.... i want to swap in a tilt column. do i have to find a 95 doner? or will a 96 97 or 98 steering column work? the reason i ask is because mine is tbi and 96 97 and 98 are vortec.
@asheketchum5178 4 жыл бұрын
Thank you for the detailed walk-through. You saved me $500. I really appreciate it!!
@1AAuto 4 жыл бұрын
+Ashe Ketchum Thanks for checking us out! 1AAuto.com
@bigassredbeard8062 3 жыл бұрын
I have a stripped bolt down on the wiring harness it moves around freely but the center bolt/nut/screw is not coming out. Any advice?
@manuelarechar2448 4 жыл бұрын
Good tutorial me ayudó mucho gracias
@1AAuto 4 жыл бұрын
+Manuel Arechar Thanks for checking us out! 1AAuto.com
@jeffreysenior 5 жыл бұрын
1995 Chevy truck. Well I put in a new ignition wiring harness switch from 1A Auto $37.95 free shipping and that solved all my pro
@chamirf 4 жыл бұрын
Jeffrey Pabian what was the issue?
@bigassredbeard8062 3 жыл бұрын
Where did u get it I can’t find it on there website
@clayholliman5304 4 жыл бұрын
Very good video man ..nice thanks
@1AAuto 4 жыл бұрын
+Clay Holliman Thanks for checking us out!
@arturo707 2 жыл бұрын
I got a 97 single cab , was experiencing issues before I got to the first step. ( Disconnect negative cable on battery) . Barely a quarter turn to loosen the cable I got power. I recommend to anyone experiencing problems to try this first!
@jeff-JAO530 6 ай бұрын
Thank you Brother!
@johndillinger8482 3 жыл бұрын
i paid a garage $300 to do this and im glad they did it
@rupertp.rutzki4868 4 ай бұрын
Instead of hunting down an inverted torx, I used a torx head screw and vice grips. Done and done.
@jasonbeason4780 Жыл бұрын
I still can crank my truck but the fuel pump and dash lights and turn signals won't work. Would this part be the cause of my problem 95 Cheyenne k2500 4x4.
@jaliskillols902 Жыл бұрын
I currently have a problem with my 98 Tahoe each time I turn the switch into the run position my ignition 40 fuse blows … could these be the problem? ( starter is new thinking that was the problem I replace it since was giving up) I have no other issue whatsoever…. Thank you great video
@rest4516 3 жыл бұрын
I got a problem with my 1995 chevy, sometimes it dies when i turn the right or left signal or press on the brakes. I turn back the key and than forward and starts again. Could it be the ignition swith?
@bigassredbeard8062 3 жыл бұрын
Turn signal or step on the brake to put into drive it just dies? Like doesn’t choke or anything just acts like pressing the brake means I turned the key off..? Mines doing the same thing and I’m going nuts trying to track this down
@ThePanman48 3 жыл бұрын
My turn signal also out and all guages but flashers work. About to change now, finger's crossed
@daleeverhart3308 5 жыл бұрын
97 K1500 Tach and Speedo dead this definitely is the fix. Easy enough to diagnose. Put a test light on #20 fuse if no power to transmission this is likely why. Not too hard to do recommend buying E4 and E5 deepwell 1/4 inch set. You don't need to remove the steering wheel.
@1AAuto 5 жыл бұрын
Thanks for your comments and for watching! +Dale Everhart
@chickensbelike2790 Жыл бұрын
happy to hear a 97 chevy takes this I was gonna be mad if this thing wasnt the fix
@rebjimj.e.4119 2 жыл бұрын
Question: Can a bad ignition switch cause an intermittent problem where the alternator does not charge but vehicle will still crank and start? I have this problem on my truck and neither myself nor 3 mechanics have been able to figure out what's going on. It has new alternator, battery etc...problem still randomly happens, which then causes trans computer to not power and truck is stuck in 1st gear with battery discharging. A friend said ignition switch could be the cause... Fun times.
@1-Six-dee 4 жыл бұрын
I have an issue where truck starts then shuts off throwing a p1626 code could the cylinder be the issue?
@Su13ankid 8 ай бұрын
I broke the plastic knob where the ignition switch seats on the steering column. What can I do? Super glue? I cant seem to find a replacement part for that online
@TheMultiCreative 2 жыл бұрын
😍😍😍 I have a 96’ Silverado crew cab
@larryllanes1166 3 жыл бұрын
Does this fix no RPM or speed reading issues?
@lifeonmars8703 Жыл бұрын
Another wonderful I hate vehicle designers moment.
@fandechavalones3022 3 жыл бұрын
Does it matter wich side the bottom grey connector go
@120BLACKWOLF 5 жыл бұрын
Can someone please tell me what the plastic mechanism is that you pull the ignition switch off of.. mine broke and now my key turns with no resistance and powers no accessories.. someone please help!!
@z4u68 4 жыл бұрын
Hi , Do you have a vid on doing this to a 98 astro van
@1AAuto 4 жыл бұрын
+Max Stevens We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
@juliodiaz8280 3 жыл бұрын
I have a 98 Chevy c1500 w/t 4.3 rcsb . Security light on permanent. Unfortunately I disconnected the battery and now it starts and shuts off immediately. What can I do? Also do you have an ignition switch for my truck?
@joshuathomas4602 3 жыл бұрын
Security relearn
@markkiser5120 3 жыл бұрын
AOK thank you
@brandonhilligas7648 3 жыл бұрын
Could a failing ignition switch cause no speedo, tach, or gear select indicator, and no power to transmission fuse?
@tonygraham6722 3 жыл бұрын
Yes but if that doesn't fix it could be the ecu but more likely the ignition switch I had the same problem
@Gear1993Head 3 жыл бұрын
I dont understand why you removed the steering wheel...
@charleebrown7188 3 жыл бұрын
You dont have to. You just gotta figure out how to ge the wiring to come off. He didnt explain near adequately.
@z4u68 4 жыл бұрын
I have a 98 astro , if i turn the key and it dont start But I play around with the tilt , up and down and then it starts , Do you think I need this kind of part on my van, thanks in advance.
@1AAuto 4 жыл бұрын
+Max Stevens We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
@jnez08 3 жыл бұрын
Would the ignition wire be the cause of a no start no spark no fuel pressure?
@richiecrosby9695 2 жыл бұрын
Jnez08 did you find an answer for this question? I was told yes this will cause a no spark issue and code usually ends up stating it is a Crank shaft position sensor.
@ndeeeed 6 ай бұрын
I’m starting to think this is the cause for my truck losing power just long enough to reset the computer and clock. Thanks for the video. I’m gonna do some investigating.
@stephendavidcavuoti6548 4 ай бұрын
He Should have released the E Brake Handel before the screws ‼️
@fandechavalones3022 4 жыл бұрын
8:48 i damaged those wires will it cause any problems ?
@ericmartinez6692 3 жыл бұрын
My truck fuse 40-a fuse / ignition keeps blowing out. I've heard this could be related to fuel pump wiring issues. I jump started the started and even worked after a few cranks. What do you recomend my issue is? Also, please help me locate the area/wires that would most common be the issue at. Thanks in advance.
@1AAuto 3 жыл бұрын
+Eric Martinez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
@teddybear3692 2 жыл бұрын
Wow finally done ody that knows what they are talking about ..I have a similar problem..turn key on to crank and guages don't work ,no power to starter and every thing else has 13.6l8ghts,radio,everything ,can even cross out starter and it turns over but no fire to ignition....0lease help0
@angelrenteria6518 6 жыл бұрын
could the ingition swith be the cause that my transmission does shift gears. because when i hit a bump mine shuts off and i have to tap the ingntion swicth , so my transmission can do its work onces again.
@jacobynoctis4825 6 жыл бұрын
Angel Renteria yes it can.
@scottliebetrau4736 7 ай бұрын
I did happen to notice that he forgot to put the snap ring back on. Other than that it was a great video
@ramadorful Жыл бұрын
Hi my problem is the key switch { sound} and exterior lights stay on after the key is out and off , do i replace the ignition switch or the key cylinder ? please help .
@urielpreciado6954 5 жыл бұрын
Will a bad ignition switch could cause my rpm and mph gauges not to work and also cause transmission not shifting
@re-focuspropertysolutions6843 5 жыл бұрын
yes
@marymcdonald6758 5 жыл бұрын
Definitely !
@StevesDIYProjects7 5 жыл бұрын
it can but its prob the speed sensor on the trans.
@jerryrod83 5 жыл бұрын
Mine started doing the same thing did you get yours fixed? If so what was the problem
@1-Six-dee 5 жыл бұрын
@@jerryrod83 I am. Having the exact same issue I am replacing the switch now it is a pain n d ass, lmk if u haven't got your fixed or if this was your fix
@EataPeachMike 3 жыл бұрын
Been to your guys website but you guys don't have one for a 97 GMC suburban c1500
@bertus76q 3 жыл бұрын
Nice video but no need to remove airbag or steering wheel
@brandoninfranca2755 4 ай бұрын
What do I do if I broke the plastic piece that the switch slides on to
@billcurry7121 5 жыл бұрын
Will this make my shift solenoid in my transmission to go bad?
@1AAuto 5 жыл бұрын
+Bill Curry Thanks for watching! This part is only related to the vehicle start up. If you are having issues with your transmission then there is another problem. 1aauto.com
@billcurry7121 5 жыл бұрын
@@1AAuto okay thank you I had my transmission rebuilt just a little while ago had trouble with it and knew was the shifting solenoid they replaced it and they blamed it on the starter ignition
@megabigcesar 3 жыл бұрын
@@billcurry7121 I have the same problem, did you fix it?
@charlieclark2609 4 жыл бұрын
I have this same truck almost. And I have trouble starting it. It'll start to turn over but then just stop and it'll just struggle to turn over. It's almost like it loses power to start and then a few seconds later it gets it back . I'll turn the key again but just slightly and it usually fires right up. Any ideas on what the problem is.?
@trill9616 4 жыл бұрын
I have the a similar problem to my 98 k2500 454. Suburban it will crank the engine but wont wont start i changed the fuel pump and fuel filter sparks plugs etc but i cpu says its an ignotion problem i havent changed it yet im guess i might have to change the ignition harness also
@DustyB1776 Жыл бұрын
So my 95 Chevy k2500 cut out on me and turned back on when I was juggling the keys the lights turned on. I went to start it this morning and the light only turns on on the dash at a certain point when my key is turned to the off position and when I go to cycle the light cuts out. Would this be my problem?
@1AAuto Жыл бұрын
+Dusty Berkram We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@codyi 6 жыл бұрын
Could a bad ignition switch cause my 95 silverado to not shut off when key is in off position. Also dash lights stay on when truck is off
@1AAuto 6 жыл бұрын
+Cody Stanfield It may cause this type of a malfunction. 1aauto.com
@eugeniahoppe3289 6 жыл бұрын
Cody Stanfield How was it fixed
@rodriquestaylor3056 5 жыл бұрын
1A Auto Parts aye when yo car sometimes crank is that cause of the ignition starter switch
@elvispressedtalot9899 5 жыл бұрын
is there any tools/toys that can located a broken ignition switch .or . like a a multimeter style toys?
@1AAuto 5 жыл бұрын
+elvis pressedtalot You can use a Multi-meter to check continuity pin by pin to look for broken wires, check for voltage at the switch as it is operated. It's more common to have the switch wear out internally from it turning over and over again. After you take the column apart to access the wires you still might need to replace the switch assembly after all.
@elvispressedtalot9899 5 жыл бұрын
@@1AAuto found out this product .. "littelfuse" 175amp mega was the reason why the dash board wouldnt light up. like no power locks,light, radio, etc...... but after changing it. started right away. being its -19 the last 2 days. im blaming the battery now :/
@elvispressedtalot9899 5 жыл бұрын
@@1AAuto im sure of it . the brand name "littelfuse" 175amp . was at fault. first there was no power. but after using the test light.. 1 side of the fuse. lite up and the other line that leads to the alternator didnt. . so after changing that.. i have power to the dashboard now. and now 1 of 2 things is preventing it from starting.. (starter) or (Alternator). gonna guess it . having an alternator on hand. . starter is gonna have to wait
@1AAuto 5 жыл бұрын
Thank you for your reply! We wish you luck with your repairs and if you need any assistance locating parts for further repairs please feel free to contact us 888-844-3393 and we would be happy to further assist you, thank you! +elvis pressedtalot
@mattluera95 5 жыл бұрын
I did this without removing steering wheel
@brandonstephens554 3 жыл бұрын
Yeah dude way over did it
@jeffreysenior 5 жыл бұрын
Easy test if it is your ignition switch is not working . If you’re tac. does not work, speedometer is not working properly, shift indicator light is not working, and your transmission is not shifting or stuck in 3rd. Here’s what you do to test your ignition switch. With the engine running, hit the back of the Key and drive into the ignition switch. It might take a few sharp hits but see if your tech starts working. If it works I believe everything else will too. This procedure confirms your ignition switch is bad. It comes as an assembly wiring harness. I just ordered a wiring harness through (1A Auto )for $37 and will be putting it in shortly I believe this will cure of my problem.
@1AAuto 5 жыл бұрын
+Jeffrey Pabian Thanks for the interesting tip and continued support, Jeffrey!
@trill9616 4 жыл бұрын
What if the truck wont start bit it cranks i already changed the spark plugs and coils aslo the fuel pump and filter i haven't changed my ignotion switch even though it says it on the computer will reprogram the ignition swith when i get a new one ? Also do i have to change the ignition harness aswell?
@lh98 7 ай бұрын
Can a bad ignition switch cause the starter to crank before I turn the key all the way? In “on” or “run” mode it starts cranking the engine and won’t stop unless I turn the key off. I think the starter is staying on and squealing when the engine starts. It literally starts to crank before I turn the key to start it. So weird.
@1AAuto 7 ай бұрын
+L H We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@aliennotion2876 2 жыл бұрын
Removing the steering wheel was totally unnecessary to do this replacement.
@xannedoutbangin3698 3 жыл бұрын
When I put the lock cylinder back in it won’t turn so I can get the key out but it turns to the battery on position and start position, any ideas?
@C_HILL_OUT 3 жыл бұрын
I had that same problem. I used a dead blow and tapped the cylinder with the key in a few times and got it to move.
@Retrogamewizard 6 жыл бұрын
95 chevy, where is the ignition relay? please help
@dbo8482 5 жыл бұрын
Does this part fit the 97 K1500?
@1AAuto 5 жыл бұрын
+D Bo Thanks for checking us out! This particular part is not going to be compatible with the 1997 K1500, it only goes up to 96. We currently do not have one that will work with the 97 year. We are always receiving new stock and may carry it in the future so be sure to check back!
@dixiehandyman 3 жыл бұрын
I have a 95 diesel and one day I went to start it up and nothing. I had zero issues with speedo transmission etc. I waited a push button switch up and that worked great for a few weeks. Then my glow plug light stopped working and it was crank city no start. I checked voltage on the harness weird and one has zero current. I will be picking up that e4 bit tomorrow and finishing this job. Hopefully that does the trick. Really want to get the new tires back running...
@1AAuto 3 жыл бұрын
+Dixieland Holdings LLC Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@92Tabler 10 ай бұрын
I had an issue where my vehicle would start with no key, or any key would fit and turn the ignition. I replaced my ignition lock cylinder, and now my new key won't come out, It don't look like my key is turning all the way into the off position. My question is, would a faulty ignition switch like this cause a key not to turn all the way off? Thanks!
@1AAuto 10 ай бұрын
+Jake We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@keepitonehunnidsoutheast8410 7 жыл бұрын
Quick question can a bad ignition switch cause misfire or stalling?
@1AAuto 7 жыл бұрын
+Bill Wallace Thanks for watching! Yes, a bad ignition switch could cause a misfire or stall! www.1aauto.com/ignition-starter-switch/i/1azis00005?KZfaq&CTA+Comment&YwLg3JYOYYA
@ksthundersnow 4 жыл бұрын
I know this is a year old thread but I'm just curious of what pad under the key Tumblr is for the rubber pad with the deal slots on it
@HereIsRick 6 жыл бұрын
You do not have to pull the steering wheel. There is no point at all (this is for trucks without airbags, I do not have them so I wouldn't know if it matters or not if they are there) Order an E4 deep socket online before you tackle this. There is a special one made for these vehicles.
@esbino5815 4 жыл бұрын
Lmfao im pretty sure 😂
@roycardenas6414 3 жыл бұрын
I get the same thing without removing all that steering column now my truck won't start after I get that maybe a month later it's not getting no fire I think it's a anti-theft system help can somebody recommend somebody that can fix my truck they was on it for 2 years okay if there's somebody else that can help me please text me back
@user-xv8wq7is1w Жыл бұрын
Why didn’t you put the snap ring back on?
@halbrady7533 Жыл бұрын
How to remove ign switch on a 97 1500 Chevy pu
@taylorolesen7329 3 жыл бұрын
Just want everyone to know these Chevy models ignition switches go bad and it will cause a total cranking no spark situation. Luckily a previous owner told me to smack it a lil bit and it started one last time. Next morning nothin. I get mine in mail Tuesday and then we should be back in business. (After changing my entire ignition system under the hood) it turns out to be this damn thing LOL
@1AAuto 3 жыл бұрын
+Taylor Olesen Thanks for the feedback!
@sammysr.3190 Жыл бұрын
I'm going through the same thing right now bro, I hope you got your truck back up and running. I've changed everything but this so far lol
@Supercharged111 2 жыл бұрын
I can't be the only one who noticed that haggard mismatched door handle!
@OggyBleacher Жыл бұрын
make alignment marks on the steering wheel and the mounting bolt if you are annoyed by your steering wheel being one tooth out of truly straight.
@charliela1844 11 ай бұрын
Ok, what do you do if you dont have the key?
@coltonensley7523 Жыл бұрын
What if I cant turn my key at all
@Aykadurp 5 жыл бұрын
I imagine the 97 c1500 requires a different ignition harness
@1AAuto 5 жыл бұрын
+Edwin Rodriguez We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. We do not currently offer the correct harness for your application. Hope this helps you out
@donaldlong9649 5 жыл бұрын
where can i get these tools
@1AAuto 5 жыл бұрын
+Donald Long Thanks for checking us out. You can find some of the tools that are used in this video at 1aauto.com
@donaldlong9649 5 жыл бұрын
@@1AAuto ok thanks
@user-zs5ey8xs9n 4 жыл бұрын
This switch will cause trans codes like p1860 so if you think your trans is gone it’s probably this switch trans fuse runs with the cluster 🤷🏻♂️ who knew
@1AAuto 4 жыл бұрын
+19 89 Thanks for checking us out!
@ryanwilcox2507 3 жыл бұрын
Symptoms of a bad ignition switch are no tac or speedometer working to include odometer stops working also. Transmission feels like its slipping and not shifting correctly. Problem solved by replacing the switch. Was worried that it was the ECM much more expensive. not much content on the web about this fix.
@1AAuto 3 жыл бұрын
+Ryan Wilcox Thanks for the feedback!
@blairjosephbernard2011 Жыл бұрын
Didn’t really see the point in taking the steering wheel off lol looks like can wiggle the ignition switch out with steering wheel on
@rebeccaislas8748 6 жыл бұрын
Do you have a video for a 92 firebird
@1AAuto 6 жыл бұрын
+Rebecca Islas We currently do not have an auto repair video for this particular repair. Thank you for asking. 1aauto.com
@paulm1030 4 жыл бұрын
I have a 2000 suburban. I turn my key forward it starts fine. When it is started the key will not release back by its self. I will have to turn the key back manually when started. I did try to replace ignition itself and still continued. Would this be an ignition switch issue ? Thank you for any help.
@jameszcurtis 6 жыл бұрын
do you have a video for a 2000 blazer
@1AAuto 6 жыл бұрын
+J Curtis Thank you for watching. Unfortunately, we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?KZfaq&CTA%20Comment& 866-403-3393
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 738 М.
DrShock
Рет қаралды 1,1 МЛН
The Clay Way
Рет қаралды 139 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 395 М.
PavePro Asphalt Solvent and Release Agent
Рет қаралды 4,6 МЛН
vazovskie.official
Рет қаралды 1,1 МЛН
vazovskie.official
Рет қаралды 1,1 МЛН