Buy Now!
New Intake Manifold from 1AAuto.com 1aau.to/ia/1AEIM00083
This video shows you how to install a new intake manifold on your 2008-2012 Honda Accord. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is adding to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.
This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• 10mm Socket 1aau.to/oa/1AXAA00017
• 12mm Socket 1aau.to/oa/1AXAA00015
• 8mm Socket 1aau.to/oa/1AXAA00017
• Needle nose pliers 1aau.to/oa/1AXAA00051
• Needle nose pliers 1aau.to/oa/1AXAA00052
• Pliers
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Extensions 1aau.to/oa/1AXAA00015
• Torque Wrench 1aau.to/oa/1AXAA00044
• Drill
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa/1AXSS00035
• Sandpaper
• Pick 1aau.to/oa/1AXAA00037
• Rubber Mallet 1aau.to/oa/1AXAA00413
• Sanding Block
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.