How to Replace Intake Manifold 2011-2019 Ford Fiesta

Рет қаралды 19,621

2 жыл бұрын

Buy Now!
New Intake Manifold from 1AAuto.com 1aau.to/ia/1AEIM00069
This video shows you how to install an intake manifold on your 2011-2019 Ford Fiesta. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is added to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.
This process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oBL/1AXAA00013
• 10mm Flare Wrench
• 10mm Socket 1aau.to/oxm/1AXAA00017
• 15mm Socket 1aau.to/oBE/1AXAA00015
• 18mm Socket 1aau.to/onm/1AXAA00043
• 8mm Socket 1aau.to/oxm/1AXAA00017
• Stretch Belt Tool 1aau.to/oa/1AXAA00114
• Hose Pliers
• Needle nose pliers 1aau.to/oeH/1AXAA00051
• Needle nose pliers 1aau.to/oeH/1AXAA00052
• Pliers
• E8 Inverted Torx Socket
• T25 Driver 1aau.to/ofR/1AXAA00008
• T27 Torx Driver
• T30 Bit 1aau.to/ofR/1AXAA00008
• 1/2 Inch Ratchet 1aau.to/onm/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/oxm/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oBE/1AXAA00015
• Swivel
• Drill
• Gloves 1aau.to/odS/1AXSS00048
• Safety Glasses 1aau.to/ocK/1AXAA00343
• Pick 1aau.to/ofV/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Ford Fiesta 2011-2019 6th Generation: • Ford Fiesta 2011-2019 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 15

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@Alex-po3rr Жыл бұрын

I'm replacing the cambelt on this car and needed to know how to remove the intake manifold in order to install a flywheel locking tool. This video was very helpful, thank you for the great work.

@user-qc4un4sj2b 8 ай бұрын

You have to admire Ford's creative ways to suck money out of a person. I'm watching this because my mother inlaw needs a new pcv valve. What used to take 10 minutes and cost $10.00 now takes 5 hours and costs $100.00 if you do it yourself and $800.00+ if they do it. Creative huh, just make the valve complicated, expensive and impossible to change without removing the intake manifold. Bravo Ford you did it again.