How to Replace Radiator 2002-2006 Honda CR-V

Рет қаралды 38,393

2 жыл бұрын

Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1ARAD00788
This video shows you how to install a radiator on your 2002-2006 Honda CR-V. Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle.
This process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 24mm Socket
• 8mm Socket 1aau.to/oa/1AXAA00017
• Coolant Funnel Set 1aau.to/oa/1AXAA00116
• Trim Tool Set 1aau.to/oa/1AXXX00004
• Pliers
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Extensions 1aau.to/oa/1AXAA00015
• Cloth Rags 1aau.to/oa/1AXSS00035
• Drain Pan 1aau.to/oa/1AXAA00320
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 28

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@alcisne9 10 ай бұрын

Thanks you my friend, my mechanic wanted to charge me $300 labour, after I watch your video I said to my self, I can do this ,now I say I did this.Thanks again.

@iduffee 11 күн бұрын

Great video. If you are doing this, please do yourself a favor, and if you don’t have a very low profile ratchet, get a ratcheting 10mm wrench for the bolts on the side of the radiator brackets. Was by far the hardest part when using a regular box end of wrench, but was a breeze with a simple ratcheting 10mm from advanced auto parts. Will save you a lot of time and hassle, wouldn’t think of doing this again without.

@darishahmohdshah 17 күн бұрын

Tq so much, i liked from malaysia

@kaisermuzik8540 11 ай бұрын

Hands down the best auto video I've seen, great video shots and instruction. Your a born teacher thanks again.

@calvinjones9716 8 ай бұрын

One of the best step by step I’ve seen in a while.

@Dr4gonWarrior 9 ай бұрын

Absolutely amazing. I was broken down in a parking garage and you guys saved me! As a reminder to the person that was talking about the time, spent bolt tightening is to make sure and use KZfaq high-speed playback. It was pretty easy to watch this whole video in 1.75 speed. Also, I really like seeing you take out every single bowl because it help me determine some other aspect such as what wrenches do I need to have and how many grommets do I need etc.

@lorenyork 11 ай бұрын

Thank you so much. Excellent video with clear, easy to follow instructions. I used this video to install a new radiator as the original began venting water. If anyone encounters seized bolts, apply WD40 or Inox overnight then apply heat directly to the bolt via blowtorch or oxy until the metal is very hot (15-20 seconds should do it). The bolts should move freely after that, while still hot.

@user-dw4qv7wg8w 4 ай бұрын

Thank you so much, you were a huge help to me. Best step by step process to help me (23 no experience on cars) do it right.

@gamingontheside3771 Жыл бұрын

thank you my brother tore my mom's CRV to pieces and I'm getting to rebuild it both fans are missing and so is the AC condenser now I know what to look for and what to install so that the car can be brought back to life

@arturozunigaflores110 Жыл бұрын

Excellent! Great job. Thanks for sharing.

@TheWopper78 Жыл бұрын

Well done. Thanks for you upload

@grayr563 2 жыл бұрын

great video -- thank you!

@aurotoiras_ttv Жыл бұрын

Thanks, getting ready to do this after I installed an alternator, don't ask why

@martinlevi8612 5 ай бұрын

Very well explained 👍🏼

@c0ffe3mn88 9 ай бұрын

Great video but you may aswell replace the hoses and the thermostat when you're doing this and C clamps if it hasn't been done.

@olderrol1968 Жыл бұрын

Thank you a bunch. Thank you 👍

@jimtownsend7899 2 жыл бұрын

I just bought my granddaughter a 2003 CR-V, and the seller included a new radiator, hoses, and fans, which he was planning on pre-emptively installing. So I'm glad you provided this video to help me make sure I don't miss a step or make it any harder on myself than it has to be. Quick question: This is my 1st Honda, and I thought Honda coolant was blue. I notice you used an after-market fluid, and that it is green/yellow. Any issues with using an after-market, and as long as it's a silicate-free OAT or HOAT suitable for "Asian Engines", will it work without issues? Thanks!

@deanmachine604 2 жыл бұрын

You can use off the shelf coolant that lists Hondas as the make its intended for. In my limited experience this coolant has always been blue.

@darishahmohdshah2488 Ай бұрын

@Dougarony 8 ай бұрын

How long of a job is it for the average backyard mechanic?

@ETPitt Жыл бұрын

No thermostat replacement

@otheliayap4693 Жыл бұрын

My outer door handle of front passenger side honda CR V, 2003 Model was broken. I bought a honda replacement for said but i no idea how to install it

@otheliayap4693 Жыл бұрын

I mean i bought a honda replacement for said handle.

@chriswingenfeld6436 Жыл бұрын

👍 Buy a Honda!!!!😂

@mosesmutale8278 2 жыл бұрын

My mechanic forgot to connect the coolant temperature Cable

@stellavisionmade-in-usa.9443 2 ай бұрын

I always love your tutorial but this time the camera man is making me dizzy to the point that I can't finish the video. My advice to the camera man or woman. You are moving too much, your close ups are way too close without giving an idea where you are on the car. Steady your hand and zoom out as well as zoom in. Using a tripod would help . I feel like I'm on a boat being hit by waves,, nauseous . Constructive criticism my friend.