How to Replace Thermostat with Housing Assembly 2002-2006 Honda CRV

Рет қаралды 48,131

2 жыл бұрын

Buy Now!
New Thermostat with Housing Assembly from 1AAuto.com 1aau.to/ia/1AEMX00307
This video shows you how to install a thermostat and housing on your 2002-2006 Honda CR-V. The thermostat controls the flow of coolant in your vehicle’s engine. When a thermostat fails, it can lead to overheating, which will damage the engine. One sign of a faulty thermostat is a cool upper radiator hose when the engine is at full operating temperature. It’s important to replace the thermostat immediately if you suspect it is failing.
This process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obz/1AXAA00013
• Pry Bar 1aau.to/oX/1AXAA00020
• 10mm Socket 1aau.to/oa5/1AXAA00017
• Coolant Funnel Set 1aau.to/oe/1AXAA00116
• Trim Tool Set 1aau.to/o5/1AXXX00006
• Hose Clamp Pliers 1aau.to/og/1AXAA00076
• Needle nose pliers 1aau.to/oA/1AXAA00051
• Needle nose pliers 1aau.to/oA/1AXAA00052
• 1/4 Inch Ratchet 1aau.to/oa5/1AXAA00017
• Socket Driver
• Socket Extensions 1aau.to/obo/1AXAA00015
• Torque Wrench 1aau.to/oaH/1AXAA00044
• Gloves 1aau.to/op/1AXSS00048
• Safety Glasses 1aau.to/oq/1AXAA00343
• Silicone Paste
• Drain Pan 1aau.to/oB/1AXAA00320
• Funnel 1aau.to/oi/1AXAA00310
• Pick 1aau.to/oH/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/oq/1AXAA00280
Subscribe: / @trq
Check out our playlist:
Honda CR-V 2002-2006 2nd Generation: • Honda CR-V 2002-2006 2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 30

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@apckofllamas Жыл бұрын

At 8:46 you can see that you cracked the housing... did it leak after install?

@rubenmartinez4346 Жыл бұрын

Just found out that’s the issue for my vehicle. Will be doing this job this weekend. Thank you!

@luizbellini343 Жыл бұрын

I know your voice from 1A Auto. You are pretty good teaching.

@joshuacronk9499 Жыл бұрын

This is a fantastic video. Great explanation of each step. Thank you!

@jeweled172 2 жыл бұрын

Awesome tutorial 👌

@Shanty 8 ай бұрын

hi, what if that sensor/ switch that goes to the engine right next to the housing got broken ? at 4:18 what is it for ?

@thomasvanguilder9593 Жыл бұрын

Awesome video nice and easy 👍

@Casinolife07 Жыл бұрын

Do we really need to replace the plastic part that goes into the engine ?

@phxrsx Жыл бұрын

Is it necessary to take off the housing?

@howardtheduck709 11 ай бұрын

How did you line up the assembly so easily?

@anthonydecarojr3501 Ай бұрын

why did he take the back housing off the block when the point was to replace the thermostat? Couldn't you just take the front piece off, replace the thermostat without removing everything else?

@anthonydecarojr3501 Ай бұрын

Exactly.

@gush9348 2 ай бұрын

Thnx

@erickregnier1112 Жыл бұрын

Hi there question, is it possible to already connect and torque the thermostat on the houseing and install as one unit?

@sulimanayad 2 жыл бұрын

Hey thanks for the great video! Could you be more specific about what type of silicone paste you used? Thanks!

@malcolmpayne5991 11 ай бұрын

Great video but . . the torque settings you ask for are 7-8 ft/lbs, but the torque wrench you link to has a minimum torque of 25 ft/lbs - any links to a lower torque wrench?