Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS02876
This video shows you how to install new rear brake pads and rotors from TRQ on your 2013-2018 Hyundai Santa Fe. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This repair was done on a 2016 Hyundai Santa Fe Sport Base 2.4L Sport Utility 4-Door FWD Automatic and the process should be similar on the following vehicles:
2013 Hyundai Santa Fe Sport
2014 Hyundai Santa Fe Sport
2015 Hyundai Santa Fe Sport
2016 Hyundai Santa Fe Sport
2017 Hyundai Santa Fe Sport
2018 Hyundai Santa Fe Sport
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obIt/1AXAA00013
• Phillips Head Screwdriver 1aau.to/obIt/1AXAA00013
• 10mm Wrench 1aau.to/oaeD/1AXAA00010
• 14mm Wrench 1aau.to/oaeD/1AXAA00010
• 14mm Socket 1aau.to/ocbx/1AXAA00015
• 21mm Socket
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/obr/1AXAA00288
• Needle nose pliers 1aau.to/oJj/1AXAA00051
• Needle nose pliers 1aau.to/oJj/1AXAA00052
• 1/2 Inch Impact Gun 1aau.to/oy4/1AXAA00252
• 3/8 Inch Drive Ratchet 1aau.to/ocbx/1AXAA00015
• Torque Wrench 1aau.to/obeW/1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/obce/1AXSS00048
• Safety Glasses
• Silicone Brake Parts Lubricant
• Floor Jack 1aau.to/oaz7/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oamU/1AXAA00065
• Wire Brush 1aau.to/oyI/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.