How to Replace Rear Strut 2001-2007 Toyota Highlander

Рет қаралды 16,766

2 жыл бұрын

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASTS01656
TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2001-2007 Toyota Highlander.
This process should be similar on the following vehicles:
2001 Toyota Highlander
2002 Toyota Highlander
2003 Toyota Highlander
2004 Toyota Highlander
2005 Toyota Highlander
2006 Toyota Highlander
2007 Toyota Highlander
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 19mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 12mm Socket 1aau.to/oa/1AXAA00015
• 14mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 30mm 12-Point Socket 1aau.to/oa/1AAST00002
• Locking Pliers 1aau.to/oa/1AXAA00139
• 3/8 Inch Air Impact Gun
• Torque Wrench 1aau.to/oa/1AXAA00044
• Center Punch 1aau.to/oa/1AXAA00055
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
Check out our playlist:
2000-2007 Toyota Highlander 1st Generation: • 2001-2007 Toyota Highl...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 19

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@connorblackwood2338 Жыл бұрын

Axle nut removal not recommended or necessary. Lift the entire rear so the sway bar pulls both spindles down. Use a ratchet strap to pull/position each spindle downward and out of the way

@troy9er 5 ай бұрын

Looked pretty easy!

@asintonic Жыл бұрын

Hi thank you can i do this with a 2 ton floor jack for a 2003 highlander? Thanks

@marcustartsah2100 Жыл бұрын

Will the process be the same for a 2011 Highlander?

@Moabel 9 ай бұрын

What tools were used?

@noahguymon6588 Ай бұрын

Is the part number for third row seat the same as without third row seat?

@TRQ 29 күн бұрын

+@noahguymon6588 The part linked in the video is specifically for models without third row seating.

@marcusdarnell3348 2 жыл бұрын

Can you use a screwdriver if you don't a have punch to knock in the axle nut? Nice video

@yoyobored847 2 жыл бұрын

Oreilleys has some separators but if your thing is rusted in there. Have fun

@PimptatoPCs 2 жыл бұрын

Is the process any different for a Hybrid?

@mvc2177 Жыл бұрын

I have the same question. Have you got an answer?

@rickeydidio Жыл бұрын

Can these be done like the front without loosening the axle nut?

@mikekmalick Жыл бұрын

Good question! My friend wants me to replace his on rear. I just did his fronts.

@TheWillysmith87 Жыл бұрын

Alignment necessary after?

@TRQ Жыл бұрын

+asdsie ksefbo We do recommend getting an alignment after installing any suspension parts.

@Suddenmindfulness 5 ай бұрын

Chile I thought I was about to do this myself…😅😂

@yoyobored847 2 жыл бұрын

Their damn struts would not line I had to force them in. The studs on top. Poor quality. Don't buy cheap. Buy oem and save doing it yourself. Lifetime warranty is not even worth it. It's going to cost you more headaches and money if these fail a year or two and then have to replace them!