How To Replace Tailgate Handle 97-05 Ford F150

Рет қаралды 64,418

1A Auto: Repair Tips & Secrets Only Mechanics Know

14 жыл бұрын

Buy Now!
New Tailgate Handle from 1AAuto.com 1aau.to/ia/1ABTH00009
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off tailgate handle. This video is applicable to most 01, 02, 03, 04, or 05 Sport Trac and 97, 98, 99, 00, 01, 02, and 03 Ford Pick-ups.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaaV/1AXAA00013
• 11mm Wrench 1aau.to/onW/1AXAA00010
• 11mm Socket 1aau.to/oXq/1AXAA00015
• T30 Driver 1aau.to/opQ/1AXAA00008
• Ratchet 1aau.to/oaco/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oXq/1AXAA00015
For More Info visit us at 1aau.to/h/a3L/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 14

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@robertemery7985 7 жыл бұрын

I was having a very hard time opening my tailgate. Finally I used enough pressure on the handle that it broke. I followed this video to replace my tailgate handle on my 01' F150. Could not open the tailgate, so I removed the liner and cover while it was closed. Once the cover was off, I removed the handle. Prior to opening the tailgate I used Blaster Silicone Spray Lubricant on all moving parts and both latches going into the sides of the bed. By pressing down on the handle of the latching mechanism that the handle is used to press down on, the latches on both sides of the bed opened easily. Once the tailgate was opened, I sprayed both side latches with silicone and the bed now unlatches very easily. In the future I'll keep the silicone handy for preventative maintenance rather than using the "Armstrong" method. Great video, was very helpful. Thank you very much!

@1AAuto 7 жыл бұрын

+Bob Emery Nice work. We're glad the video helped you out. 1aauto.com 866-403-3393

@bman6065 3 жыл бұрын

I'm thankful for this video. Was as easy as an oil change.

@TomBrueggen 9 жыл бұрын

lekocafe you're right. My handle simply ripped, the plastic tore. I couldn't pop the latch with a screwdriver, so I had to cut the strike bolt off with a sawzall to get my tailgate off. Now I've got a bigger mess! Also the weld on the left side hinge broke, so i have to replace all that. Years of abuse I guess.

@stevescifres2658 3 жыл бұрын

Thanks for the video. Very helpful.

@lekocafe 11 жыл бұрын

one other note. these handles tend to break a lot, but it's been my experience that the lock mechanism tends to get full of road grit and dust. I'd recommend dousing the hell out of any moving part of the tailgate latch, before you put the cover back on. it will feel like a brand new truck, when you do that.

@jn1mrgn 2 жыл бұрын

Is there an aftermarket handle made out of metal?

@dougjamesvandals 5 жыл бұрын

Thanks made it easy

@1AAuto 5 жыл бұрын

Thanks for checking us out. 1aauto.com +Mariners

@mvandament 5 жыл бұрын

My son has one of these and he has trouble opening his tailgate. We pulled the cover off and don't see anything broken off from the inside of the handle. How do you adjust the rods on the mechanism that mounts to the handle on the inside?