Рет қаралды 26,666
Buy Now!
New Turn Signal Combination Lever from 1AAuto.com 1aau.to/ib/1AZCC00167
This video shows you how to install a new turn signal combination lever from TRQ on your 1999-2006 Chevrolet Silverado 1500.
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Pocket Screwdriver
• 8mm Wrench 1aau.to/oib/1AXAA00011
• 4mm Socket
• 7mm Socket 1aau.to/obgC/1AXAA00017
• Side Cutters
• E6 Inverted Torx Socket
• T25 Torx Driver 1aau.to/oEv/1AXAA00008
• T25 Torx Socket 1aau.to/oEv/1AXAA00008
• Ratchet 1aau.to/obFS/1AXAA00016
• Electrical Tape
• Gloves 1aau.to/oaha/1AXSS00048
• Safety Glasses 1aau.to/o96/1AXAA00343
• Wire Ties
• Pick 1aau.to/oRx/1AXAA00037
• Utility Knife 1aau.to/ofQ/1AXAA00082
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.