How to Replace Combination Switch 99-02 GMC Sierra 2500

No video

How to Replace Combination Switch 99-02 GMC Sierra 2500

Рет қаралды 598,469

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

Buy Now!
New Combination Switch from 1AAuto.com 1aau.to/ia/1AZC...
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, faded, worn or faulty turn signal stalk, high beam and wiper switch. This video is applicable to the 99, 00, 01, or 02 Chevy Silverado and GMC Sierra models.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oHg/1AX...
• 10mm Socket 1aau.to/ow7/1AX...
• 7mm Socket 1aau.to/ow7/1AX...
• Wire Cutters
• T20 Driver 1aau.to/ohX/1AX...
• T27 Torx Driver
• Ratchet 1aau.to/oHN/1AX...
• Socket Extensions 1aau.to/oBc/1AX...
For More Info visit us at 1aau.to/h/af8/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 273

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@antoniobennett8711 6 жыл бұрын

Thank you 1A Auto, I pulled a turn signal switch from pic a parts here in L.A. and after watching your video several times, I was able to swap out the old switch with the new switch I got off a 2006 Chevy avalanche which fit perfectly on my 2006 Tahoe. Every time I used my right blinker...my HIGH BEAMS would come on which was annoying for other drivers in front of me. This whole process took me fourty minutes, and I didn't have to swap out any harnesses. Thank You 1A AUTO!!!

@anthonygonzalez1147 5 жыл бұрын

The exact same thing that was happening to you, was and has been happening to me and it is truly annoying, makes me feel like a messed up and annoyed because to the other drivers they probably just think that I'm flashing them to be a dick. But anyways I'm glad that I'm not the only one with that problem and now that I know that by doing this it will fix the problem, is pretty dope, little things like that in my truck bother the hell out of me so I've been very destined to fix that. Thanks for mentioning your alike problem.

@franciscopalacios844 5 жыл бұрын

Same its happening to me , Im wasnt sure if changing that part would fix that ,I was thinking that maybe could be something electrical ..

@edwardtheres5874 10 жыл бұрын

Just wanted to let you guys know, I've used your you tube videos to repair my 2002 Tahoe twice now and what a great help they were. Don't think I would have had the confidence to do these jobs without your helpful videos. Thanks and keep up the good work. I will be spreading the word about your site. Ed

@1AAuto 10 жыл бұрын

Thank you for watching! 1aauto.com 888-844-3393

@leelambrecht8269 7 жыл бұрын

Just finished installing my new switch I bought from 1AAuto. Local shop wanted $600. I did it in a couple of hours for the $70 part. This video was very helpful. Thank you!

@1AAuto 7 жыл бұрын

+Lee Lambrecht Thank you for the positive feedback. We really appreciate it! If you have a minute, drop us a review on our Facebook page to let other people know about your experience with us. Here's a link: facebook.com/1AAuto/reviews/

@crustybunz Жыл бұрын

Changed the switch on my 2000 K3500. All I needed was your video. I'll check out your videos first from now on. Thanks.

@scottblubaugh 5 жыл бұрын

My cruise control has never worked for the 5 or 6 years I’ve owned my truck and after watching this video I think I’m ok without having cruise. So tired of new plastic cars breaking down after only a few years! My 67 Impala still runs because it was built with quality parts made in AMERICA!

@1AAuto 5 жыл бұрын

Thanks for checking us out. 1aauto.com +Scott Blubaugh

@jomanallen Жыл бұрын

Thank you! Still helping me out in 2023! This stalk is so much different than the 02-06 version....... just glad it worked after installing it all back!! 2 T20 torx under the wheel column btw

@jamesgomez8111 6 жыл бұрын

I ordered the part from A1, and just completed the job on my 2006 GMC Sierra. This video is really accurate in it it's steps it shows you to complete the job. The only thing different I did was I didn't remove any harnesses, or cut any tie wraps. I just used a really tiny flathead screwdriver to lift up the tabs that hold the connectors in place. They all came out real easy. At first the cruise control wouldn't activate when I tried it. But on my second try, it worked. So it's all good now. Hopefully this will eliminate my issue I mentioned in my first reply, down below. Thanks for the video.

@1AAuto 6 жыл бұрын

+JAMES GOMEZ Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY

@amyvera6408 12 жыл бұрын

Exactly as the video , even a girl can do it and I she did. This saved us hundred of dollars in installation. Did it myself but would have been nice to know the 7 and 10 were metric. Not use to the different sockets but I have asked for a set for Christmas!!!

@1AAuto 11 жыл бұрын

The issue could be related to the cruise control lever since the on off switch is located on the lever.

@ruggerdonk 10 жыл бұрын

Thanks for the post gave me the confidence to tear into mine. Turn signal keep clicking regardless what I did. After completely taking apart the turn signal switch apart and cleaning the terminals it works and didnt cost me $120+ to replace it. If you attempt the same, record the process so you can put it back together. The car didn't start afterwards. But after using a test lamp I identified we blow the TCB fuse "throttle body control". Mission complete.

@06RHDSUBIEWAGON 3 жыл бұрын

I've told this switch can cause a circuit in the rear brake light circuit to go out,Is this true ?.

@bobcullen8835 4 жыл бұрын

My low beams on on 2000 GMC Sierra were intermittent. I checked everything else and tried replacing the combo switch -> problem solved. Video was very good. I'm no auto mechanic but above average in the 'how stuff works' category. A couple of comments: 1) @3:34, removing the upper steering column panel was very tedious. Seems there was a small MALE torx bolt right above the keyswitch that prevented removal until identified. I used a 3mm socket and forced it. 2) @ 7:56, I used a curved dental pick to release the mini clip. I don't know how you could have done it with a screwdriver. Otherwise the directions were spot on. If you've never worked under the dash before, count on this taking a good couple of hours.

@1AAuto 4 жыл бұрын

+Bob Cullen Thanks for the feedback!

@bravowhiskey4415 Жыл бұрын

I have the same truck and my low beams stopped working. I spent weeks trying to diagnose the issue and came across your comment. 30 minutes later and I have lights again! 🙏

@randypower 5 жыл бұрын

Fantastic. This is how repair/replace instructional videos should be done. Thank you.

@1AAuto 12 жыл бұрын

There may be other components that would need to be installed in order to make it function. They dealership might be able to tell you what you would need to install.

@Djinantonek 9 жыл бұрын

I used this video to guide me through the install of the multi function switch with CC on my 1999 base Silverado. With the addition of the under hood servo I now have working Cruise Control using all factory parts. Great video.

@1AAuto 9 жыл бұрын

+Djinantonek Congratulations on the successful repair. We're glad the video helped you out. 1aauto.com 866-403-3393

@TheBuffalodough 10 жыл бұрын

this is the second one in 4 years. the guy at the shop charged me 450 for the job saying the part was that expensive at the dealership and 75 bucks labor. Im gonna give it a shot!!!

@1AAuto 10 жыл бұрын

Thanks for checking us out. We carry new turn signal levers on our website 1aauto.com 888-844-3393

@TheBuffalodough 10 жыл бұрын

Already bought it from you last night! Love your Utube vids. Big help thx

@djtxhick 10 жыл бұрын

I just recently had to remove and replace this control on my 2002 Silverado 3500. This video made it so much easier and quicker to perform the task. Thank you!

@1AAuto 9 жыл бұрын

Thanks for watching. Have a great day!

@nwinferno Жыл бұрын

Great tutorial. I just used it to upgrade my 2001 Silverado 1500 with cruise control. One thing I noticed is that the two bolts that hold the combination switch to the steering column were T25 on my truck instead of T27.

@1AAuto 11 жыл бұрын

it may be located on the fuse panel of the truck. the owners manual should tell you where the fuses are located. Sometimes they are in with the fuses.

@1AAuto 11 жыл бұрын

You may want to check the switch to see if there's a loose or frayed wire, which may be causing this type of situation.

@markhayden2878 9 жыл бұрын

Thank you! I am not a mechanic and thanks to you I was able to change my defective multi function switch. 2 hours and $80. for the part online

@Rizegul 5 жыл бұрын

Should have watched this first. Great video. Thanks.

@kolbyjackson293 2 жыл бұрын

Thank you. I watched other videos claiming the 99-09 was the same. And this is the only one that matches my 2002 tahoes blinker wiper cruise deal.

@1AAuto 12 жыл бұрын

This vechicle also has tilt steering. We show you in the video how to work aroung the tilt steering wheel lever.

@1AAuto 11 жыл бұрын

It could be an issue with the flasher relay.

@blain406 Жыл бұрын

Thanks this video was extremely helpful. Went through it step by step in my 01 Chevy 2500hd and now my headlights work again! Thanks guys!

@1AAuto 12 жыл бұрын

It could be. You should also check the simple things first like the fuses to see if any of them could be burnt out.

@k.orange7156 4 жыл бұрын

Went right outside and swapped mine out , took the guess work out of it . Thanks

@SteveNonna 10 жыл бұрын

Thank You Mike and all that you do. This video made it a much easier job than if I didn't have it. Your part for this works great and looks original. Bryan, I had my wife do it for me. She has much smaller hands than I.

@paulrossignol8289 9 жыл бұрын

i thank you along with many others for your instruction ,and expertise on many mechanical problems.

@1AAuto 9 жыл бұрын

Thank you for watching. Glad we could be of help. Please let us know how the repair comes out! 1aauto.com 888-844-3393

@juans6639 3 жыл бұрын

Waiting for my turn signal switch to arrive and replace it on my 2001 Silverado. Thanks, GREAT VIDEO!

@1AAuto 12 жыл бұрын

There may be a clip on the side of the harness that holds it in place.

@benm7687 6 жыл бұрын

2001 GMC Sierra. This video was extremely helpful. I've replaced my switch and was pretty straight forward. My problem that I'm having and is the main reason I switched this out in the first place, was I don't have cruise control and 4 way flashers. I'm not sure if the LED taillight/headlight upgrade has a play in it or possibly the switch I replaced it with. Another words, I'm pretty stumped now. I'm also wondering if anyone knows what the module the cruise control lead was plugged into is? I'm wondering if that little module on the right side of the column could be causing the cruise control not to work? Any suggestions and solutions would definitely be appreciated.

@brucegraham4380 11 жыл бұрын

so I did the job exactly as the vidio man did, But the truck will only start for a second or so, I did the 30 minute redlearn process several times with NO luck. Any Ideas ? I noticed the interior lights no longer work as well as the key fob. All fuses are OK. I don't know how to test relays or which one to test. I think I'll call the to truck in the morning unless you guys no something.

@LAZYLOS61 5 жыл бұрын

Bruce Graham I just I countered the same problem yesterday on my brother 2004 Astro van. Did you fix yours

@wyattoneable 2 жыл бұрын

Thank you for pointing out the cruise control wires. My truck doesn't have that so they were just hanging around.

@liljuanito123 10 жыл бұрын

Low beams in my 2005 went out, they recommended to replace this.

@justinsands1760 3 жыл бұрын

doing it for my brake lights did u fix it lol

@crusaderb.1901 6 жыл бұрын

I have a 2012 Chevy Silverado LT is this a similar job to replace?

@1AAuto 11 жыл бұрын

Most likely changing the switch out but there is the slight chance there is another underlining issue.

@Iconhulk 9 жыл бұрын

Would this video be similar for a 06 Silverado WT model (Does have cruise)

@jeffgibbs5094 2 жыл бұрын

I bought a 2005 GMC Sierra without cruise control, standard steering wheel n control's on it . Can i just add the cruise, turn signal, washer multi switch to get the cruise control to work, or do i have to change the steering wheel also

@samanthamckemmie9028 Жыл бұрын

Could the turn signal switch going bad affect the brake lights and rear turn signal? Upper Cab brake light works. New brake switch. I'm lost. Any advice is greatly appreciated

@noahkiller4386 6 жыл бұрын

Is that cruise control lead always clipped in on that right side?

@TBrew-pn9lr Ай бұрын

I have a 99 astro im replacing that switch due to cruise control problem. The pc on the column that the wires plug into, what is it called and what is its purpose ?

@1AAuto 11 жыл бұрын

It could be the flasher relay or the switch.

@stanleybrawley 7 жыл бұрын

Thank you so much for posting this video. Saved me over $600.

@1AAuto 7 жыл бұрын

+Stan Brawley Thanks for watching. If any of our viewers needs to make this repair we carry the replacement part shown in this video on our website. Here's a link to them www.1aauto.com/1A/cruise-control-lever/Chevy/Silverado/1AZCC00167?KZfaq&CTA%20Comment&ATony

@lindabryan1425 11 жыл бұрын

Hi there, Thank you so much! Received our switch for my 2002 Tahoe from you last week and replaced it today... the instructions were perfect - than you! Unfortunately the cruise control still didn't work. Decided to see if we should change the module and that is when we learned saw that all of the wires leading into the module are broken off at the connector! Do you sell the wires and connector that go into the module? I am hoping and praying this is not a complete rewiring job.

@jebbutler483 2 жыл бұрын

Best damn video I have seen for this repair.

@AuH2OBear 13 жыл бұрын

Thanks 1A ! You guys rock ! If I'd tried this on my own, I'm sure I would have screwed it up, this video was perfect. Cheers.

@RVZFan 10 жыл бұрын

Nevermind I got it. Thank you for the step by step. super helpful and saved a bunch of money!

@truckerforlife1980 6 жыл бұрын

Thank you for the video, made changing it on my wifes blazer so much easier

@davidjondoh8671 2 жыл бұрын

I'm really impressed with your how to video's. I've got a 03 Silverado WT that came without factory cruise control. I've been told that the combination switch that you guys offer will provide my truck with cruise control if installed. Is there any truth to that? If so, I'll be adding this to a long list of parts that you guys offer! Thanks

@johnsonbar1738 3 жыл бұрын

great vid, I am trying to diag the cruise control not turning on for my 2001 Yukon xl. Do you think it could also be the brake switch not functioning that would cause the cruise control to not power up?

@mattshaver7163 7 жыл бұрын

on my son's 2001 Silverado everything works fine except the blinkers will not shut off after you straighten the steering wheel after turning. Will this fix that problem?

@cliffmeister2000 7 жыл бұрын

Even though my Yukon is a 2003, this video showed me perfectly how to get this done!

@1AAuto 7 жыл бұрын

+cliffmeister2000 Thanks for watching, glad it was the same process! If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/1A/cruise-control-lever/Chevy/Silverado/1AZCC00167?KZfaq&CTA+Comment&LSwZpRc

@CrimsonHawk09 9 жыл бұрын

Please make a notation in the video of an inverted hex screw under the top covering as I almost broke my cover. I know this vehicle was already taken apart but there was only a mention of two exterior screws. Kept thinking it needed a hard pull but double checked though. Good video in helping me swap the parts.

@1AAuto 9 жыл бұрын

Thanks for watching, and also the added tip! Have a great day. 1aauto.com 866-403-3393

@ckadis713 11 жыл бұрын

Would you want to replace this if your turn signals work. But when they are off the sound for the blinkers is still on?

@jameswright9615 7 жыл бұрын

When replacing the turn signal switch, when removing the steering wheel collar, that there were two screw either t20 or phillip screws, but I think you mention the ones in your video weren't there, no one has ever done any work on mine in that area maybe but it looks just like the video that you provided, so my question is which ones were they phillips or t20's.

@scott52769 10 жыл бұрын

I have a 99 chevy silverado and when I pull the turnsignal lever to turn the brights on the light go out does it need a new turn signal lever

@lamarkirk4359 10 жыл бұрын

i have a 99 tahoe an as in the video the turn signal switch you replaced my wiring broke off right at the end near the steering wheel what i would like to know is can the wiring be replaced ? like unplug both ends an just replace the wire ?

@TheChevyboi96 12 жыл бұрын

would this switch cause the turn signals not to work and the cruise control? my signal flash in the dash but not out side my truck im wondering if this is the problem?

@brianwillis8995 10 жыл бұрын

My truck came without fog lights and I'm looking to install the switch where factory would be. How do I remove the light and cargo lamp cluster?

@corydahut5055 6 жыл бұрын

In your opinion..would changing tjis part fix my turnsignals and brake lights not working on a 99 tahoe? My running lights work just not the brake lights or turn signals.

@ki02ki 10 жыл бұрын

Would replacing this part make the cruise control and right front turn signal work again on my 07 Silverado?

@curtisjames2443 4 жыл бұрын

Whats the thing called that the little pin on the turn switch touches for the horn to work?

@davidconnolly3121 Жыл бұрын

Video with 2000 Chevy express turn signal replacement

@1AAuto 11 жыл бұрын

The installation would be similar between the two but not exactly the same.

@antonioruelas81 10 жыл бұрын

You guys are a life saver!!!!!

@swilliams9213 11 жыл бұрын

I have a 97 Silverado. A few weeks ago, the high beams only worked if I tilted the wheel all the way down! Now they don't work at all... In fact, now only the daytime running lights work if the parking break is disengaged! Even the switch doesn't turn them on. It only turns on the parking lights. I changed the headlight switch but they still do not work. Does it sound like it could be this multi-function switch? Would the replacement be the same as in the video? Any help is appreciated!

@1AAuto 11 жыл бұрын

It may be a similar process.

@randylemke3163 10 жыл бұрын

Watched your video on replacing a multi switch in a 2003 chev malibou. Very easy install thanks but now I have a new problem. The horn is not working. I think it has something to do with the pins comingnout of the multi switch and the two rings that the pins contact. Please explakin how the rings and pin function. Are they part of thenhorn circuit? Regards Randy

@jrmdodge1 12 жыл бұрын

i have an 01 silverado, and the turn signal makes the clicking sound when i hit a bump turn or when I'm just driving along, if multifunction switch is the problem do i have to replace the whole switch (cruise control, wipers, etc) or can i just purchase the part that controls the turn signals?

@garygomer7940 6 жыл бұрын

Question: what was wrong with your turn signal switch that made you replace it? My 2004 Silverado left turn signal light stays on (doesn't blink) when I push the lever down in colder weather. If I turn it off and then back on the signal blinks like normal. This issue is becoming more frequent. Also, when I push the lever down (left signal) and the cruise is on, intermittently the cruise disengages. Are these two symptoms related? Is the turn signal assembly just worn and needs replacing? Thanks for your help!!

@cheekster96 13 жыл бұрын

How hard would it be to install cruise control? I have an '04 Sierra Work Truck model that doesnt have cruise.

@jasonkwasky53 4 жыл бұрын

What’s the other wires that go to the plug above the flasher relay? I need to find that plug or harness to buy

@lionieg 12 жыл бұрын

Ok, I have a 66 buick wildcat. My brake lights do not work but what I do have is running lights, turn signals, reverses lights, and high beams. I notice when I put the car into reverse the brake lights come on (or running lights) with my reverse lights. Other then that I have no brake lights. I have put a new brake switch on, new fuses(all), bulbs(all), and I tried a new flasher. The new flasher made the turn signals not work so I put the old flasher back on.

@isaimartinez35 8 жыл бұрын

i have an 06 chevy silverado i replaced the turn signal relay and turn signal switch. i also checked the fuse and is all good, unfortunately my hazards and signals still don't work...

@1AAuto 8 жыл бұрын

+Isai Martinez I'd start trying to follow the wires back at that point and looking for a short somewhere. 1aauto.com?KZfaq&CTA%20Comment&ATony 866-403-3393

@jcano2211 11 жыл бұрын

I have an 2005 silverado 2500 hd and I am having issues withbthr turn signals..all other components worknfine except the turn signals..neither work at all..I checked both fuses on the panel nxt to the driver side and turned out they were okay.i still switch them just to be sure..and it still did not work..im guessing it would probably be the flasher relay..if im right.. where would it be located? and help will be useful. Thanknyou

@jcano2211 11 жыл бұрын

where would the flasher relay be located on a 2005 silverado 2500 hd? or does this newer models have no relay and i would have to switch the whole handle?

@jrmdodge1 12 жыл бұрын

at 4:46 do you push in on any tabs or buttons to remove the wiring harness? i loosened the screw but it wont budge? aty suggestions?

@1AAuto 11 жыл бұрын

That is correct.

@landin03 11 ай бұрын

What do you do when the electrical connector (7mm) bolt will not come out and the connectors won't come apart

@1AAuto 11 жыл бұрын

It should come right off for you as we show in the video.

@73roadrunner1 5 жыл бұрын

Hi , great video,thanks ! at time frame 7:52 ,you took the last wire off ,what is the part called > I broke the locking tab on mine & can't find out what that part is ! I thought it was a parking sensor, but I haven't been able to find that part or what it's called. I'd really appreciate it if you could help me out ! thank You !

@williamb4389 6 жыл бұрын

Thank you! Wipers kept turning on when I would use the right turn signal. ('02 Silverado)

@lionieg 12 жыл бұрын

Are both the blue and white wire supposed to have power? I have a test light.

@TheTrueBallin 10 ай бұрын

I think this is 99-00 maybe even 01 because other years you don’t have to disconnect from harness closest to firewall. Mainly the red emergency switch vs a gray one.

@Rook806 11 жыл бұрын

My cruise control stopped working on my 2001 GMC Sierra an idea how to get it fixed thanks!

@usingerinamoapensis180 6 жыл бұрын

2001 GMC Sierra needed the turn signal replaced. This video was awesome and I bought the replacement part from 1aauto, should be here 19 March 2018. I encountered a unique issue in removing the turn signal wiring harness. The 7 mm bolt just spins, and doesn't release wiring harness. Any thought on how to solve this? I have tried small vise grips to pull outward while turning to no avail.

@1AAuto 6 жыл бұрын

+Usingerina moapensis You may need to find a way to keep the nut from turning so you can back the screw out.

@ramcnei0611 6 жыл бұрын

Great video! Very helpful. But I am stumped as to why you replaced the wiring harness too. Can you just swap out the turn signal switches (replace an AC Delco with another AC Delco turn switch) without messing with the wiring harness?

@1AAuto 6 жыл бұрын

+ramcnei0611 You could do that, but if the part is old you are really better off swapping it all out, including the wires! The part shown in this video can be found here if you need it: www.1aauto.com/1A/cruise-control-lever/Chevy/Silverado/1AZCC00167?KZfaq&CTA+Comment&LSwZpRc

@mem-vz6on Ай бұрын

I think the 99-02 needs harness removal. Not sure on 03-04 but on my dads 06 didn’t have to do harness just bought the switch without harness. My 02 started with dim lights not working or would only work with tilt steering up in certain positions. Now bright’s doing same thing and will only work with tilt all the way up. Also shorting out my gauges cause int them to flash everything and gas gauge jumping all around. Replacing it tomorrow

@TailEndCustoms Ай бұрын

I just replaced my switch and now my airbag light stays on. Any ideas?

@1AAuto 11 жыл бұрын

Hi, The Trailblazer switch is a different part number, so the process may be different on your vehicle. Part Number: 1AZCC00166 on 1aauto.com 888-844-3393

@bigetcb9994 7 жыл бұрын

have 2002 chev wipers turn on by them self's motor or switch

@slogan9364 11 жыл бұрын

Thank you for your videos they are extremely helpful. If my wipers only work on the highest setting, but signals still work do you think it's the stalk switch or wiper motor

@stevemotley808 3 жыл бұрын

Same question. Did you figure it out. My wipers only work on hi

@debbiebargeron5733 7 жыл бұрын

if I can't find the right part for my 75dodge ramcharger can I use a different year model

@ArmanMnatsakanyan 9 жыл бұрын

Will it be the same for 2002 Cadillac Escalade 6.0 L ?

@beengreen9803 5 жыл бұрын

Hello and thank you for the videos. I replaced the switch and the cruise control is still not working. I was having a problem with the wipers also but fixed that separate issue. Whats the next step? Module?

@1AAuto 5 жыл бұрын

+Travis Feiner Double Check all your connections first. The Module might be the next step. However, if you know a good trustworthy mechanic. They might be able to diagnose what exactly you need as it's difficult to accurately diagnose a vehicle without seeing it in person

@charlescacioppo7554 11 жыл бұрын

i received the instructions to replace turn signal switch they were for 1999=2002 my silverado is 2007 are instructions the same these were very easy & complete thank you charles cacioppo

@1AAuto 11 жыл бұрын

It could be similar to the earlier model shown.

@smithwesson8159 10 жыл бұрын

I have a 2000 jimmy. The turn signal relay keeps ticking but the signals are not on. Is the turn signal switch bad? And in this video is the removal and install the same ?

@1AAuto 10 жыл бұрын

You may want to check the fuse to see if it's okay. 1aauto.com 888-844-3393