How to use a sliding mitre saw safely

Рет қаралды 66,983

Күн бұрын

Mitre saws are now very common and can be picked up very inexpensively. It is however very important that these machines are used safely to avoid potential injuries to the mitre saw use. This video looks at using the sliding mitre saw in a safe manner and shows which personal protective equipment should be used when using these useful machines. As a bare minimum I wear safety glasses and hearing protection each time the machine is used, but when cutting metal or masonry on the evolution sliding mitre saw I then wear even more PPE and add a full face visor and ear defenders.

Пікірлер: 142

@JAHManeShaker 8 жыл бұрын

This is such a helpful video. I bought an evolution a few months ago and I've been terrified every time. Now I know how to use it properly. Thanks!!

@ultimatehandyman 8 жыл бұрын

You are welcome. Thanks for the comment

@paull2937 2 жыл бұрын

The first time I used a miter saw I was shaking and extremely nervous, I was about to pee my pants, and when I finished my cut I was thankful to have both my hands and fingers, after using it a few times, I’m slightly more comfortable using it, but I won’t let myself get too comfortable, that can also cause injury. Thanks for making this video. Unfortunately my teacher doesn’t have hearing protection.

@ultimatehandyman 2 жыл бұрын

You are welcome. These saws are incredibly useful, but need treating with respect. Your teacher should wear hearing protection, as hearing damage can occur with prolonged use. Thanks for the comment 👍

@porsche606 5 жыл бұрын

Amazing job with this video being clear and descriptive. Can def tell you know your stuff. Thanks for the knowledge! I wish all power tools came with videos this informative

@ultimatehandyman 5 жыл бұрын

Thanks for the comment

@sergeigontcharenko3476 4 жыл бұрын

Bought a sliding mitre saw today and glad I RTFM and watched your video, I have a healthy respect for 2kW of rotating cutting power and you explained how to use it safely. Thank you.

@ultimatehandyman 4 жыл бұрын

You are welcome Thanks for the comment 👍

@steveherbert504 3 жыл бұрын

Most helpful. Theory backed up by practical application. PPE requirements a bonus too. Excellently presented. Thank you!

@ultimatehandyman 3 жыл бұрын

Glad it was helpful! Thanks for the comment

@zedman442 8 жыл бұрын

Great safe advice! Eye protection is a basic necessity. So many people I see using angle grinders without it, crazy. Problem is in the heat of the moment people either forget or put it lower down in their priority list when getting a job done. Everyone is guilty of it including myself. Getting older though it puts things in perspective and I now take time to make sure I have good PPE. Good video!

@ultimatehandyman 8 жыл бұрын

Thanks for the comment ;-)

@WheresMyPencilUK 8 жыл бұрын

Thanks for the video really useful and good to see one focusing On how to use the machine with safety being put first. I have the Evolution and the DeWalt 18v XR cordless both great machines. The ability to cut metal with the evolution is invaluable especially when cutting blinds to fit a window you just blast through the whole lot after taping together. As you say I find the DeWalt more accurate but you have to take it steady as it doesn't have the power of the corded. Keep up the great work with your channel I've found your videos invaluable when renovating a property over the last 6 months.

@verity9000 Ай бұрын

Nicely presented. Thank you very much.

@brandonvanvuuren1 8 жыл бұрын

Nice video! Good safety tips. I think it is important for those who are new to wood/metal working to watch something like this.

@ultimatehandyman 8 жыл бұрын

Thanks for the comment ;-)

@Frenchmistress123 4 жыл бұрын

Thank you. Very informative. I just bought a mitre saw - Tacklife. I'm a woman and learning how to use it is very reasurring when my Dad is too far away to give me advice.

@ultimatehandyman 4 жыл бұрын

I'm glad the video helped Thanks for the comment 👍

@muaj5371 4 жыл бұрын

Perfect video next time I do use a miter saw I will keep these rules and tips in mind!

@ultimatehandyman 4 жыл бұрын

I'm glad the video has helped ;-) Thanks for the comment

@claytongriffiths1884 3 жыл бұрын

At last someone who knows what they are doing top review.

@ultimatehandyman 3 жыл бұрын

Thanks ;-)

@jeffharmed1616 8 жыл бұрын

Thanks for sharing. You have some really excellent safety advice there thanks. Some woodworkers pull the saw backwards whilst lightly skimming the top of the work piece. This cuts a ca 2mm groove and eliminates tear-out.

@ultimatehandyman 8 жыл бұрын

Thanks for the comment ;-)

@frankelly5986 Жыл бұрын

Great video thanks for all the tips especially the safety info

@ultimatehandyman Жыл бұрын

No problem 👍

@Vik.uk. 4 жыл бұрын

Really helpful, informative and easy to follow! Thank you 🙏🏼😀😀

@ultimatehandyman 4 жыл бұрын

You are welcome Thanks for the comment 👍

@curiosity2314 8 жыл бұрын

Nice work on this video, right to the point...

@ultimatehandyman 8 жыл бұрын

Thanks for the comment ;-)

@robbeard6929 5 жыл бұрын

Brilliant, I knew all that he was saying but I'd like to point out this chap looks like he's had a shower and shave, got dressed smartly to do a video and made a professional job at the same time, I like that.

@ultimatehandyman 5 жыл бұрын

Thanks for the comment

@heatherholdren4490 4 жыл бұрын

u helped me out TREMENDOUSLY! Thank u so much!!

@ultimatehandyman 3 жыл бұрын

I'm glad the video helped Thanks for the comment 👍

@RexBanner_ 8 жыл бұрын

Brilliant video.. Incredibly helpful!

@ultimatehandyman 8 жыл бұрын

Thanks for the comment ;-)

@b-ficustv3517 3 жыл бұрын

Great video for beginners. Thank you!

@ultimatehandyman 3 жыл бұрын

Glad it was helpful!

@the_suffolk_barber19 5 жыл бұрын

We watch your videos at college for a learning aid, I’m doing multi skills

@ultimatehandyman 5 жыл бұрын

That's good to hear ;-) Good luck with the course, and thanks for the comment

@the_suffolk_barber19 5 жыл бұрын

Ultimate Handyman thank you for the helpful tips on how to use a miter saw safely, might be getting one for Christmas to start off my furniture company

@shanemack8118 8 жыл бұрын

Great video. Fair play to you making all the videos and having a young child and working and at this. You must be so busy

@ultimatehandyman 8 жыл бұрын

Thanks Shane, yes I'm very busy most of the time and rarely take a break from working either on site or on the computer (or in front of the camera). The videos seem to help people though, so it's worth the effort. Thanks for the comment ;-)

@davidyoung6608 8 жыл бұрын

Great safety video man.

@ultimatehandyman 8 жыл бұрын

Thanks for the comment

@ratchriat1716 8 жыл бұрын

i enjoyed watching the video grate tips and advice thanks a gain.

@ultimatehandyman 8 жыл бұрын

Thanks for the comment ;-)

@arasul 4 жыл бұрын

Very useful information. Thank you very much indeed.

@ultimatehandyman 4 жыл бұрын

You are welcome Thanks for the comment 👍

@leooreilly6185 10 ай бұрын

Excellent. Many thanks.

@alanmurphy8137 4 жыл бұрын

Excellent, explains it simply.

@ultimatehandyman 4 жыл бұрын

Thanks for the comment 👍

@meangreen7389 5 жыл бұрын

Great info, thank you.

@ultimatehandyman 5 жыл бұрын

You are welcome Thanks for the comment

@chriscullen4994 6 жыл бұрын

very useful tutorial

@ultimatehandyman 6 жыл бұрын

Thanks for the comment

@fieldsofomagh 8 жыл бұрын

Great practical video. Them mitre saws take the guesswork out of woodwork.Could'nt agree more with you on eye protection, it's too late when the damage is done and it's all down to neglect!

@ultimatehandyman 8 жыл бұрын

Thanks for the comment ;-)

@yusuf.alajnabi 8 жыл бұрын

great video I was looking at buying a mighty saw and stand from aldi I'm glad you have clearly explained how to use it safely unfortunately some stupid people dislike this video

@ultimatehandyman 8 жыл бұрын

Thanks Yusuf, some people dislike all my videos but luckily I'm not at all bothered as the positives always outweigh the negatives ;-)

@jeffharmed1616 8 жыл бұрын

Thanks for sharing. PPE is so cheap now days that I just hang a set by each machine.

@ultimatehandyman 8 жыл бұрын

You are welcome. PPE is pretty inexpensive now, its best to have it in easy to reach places! Thanks for the comment

@jusb1066 8 жыл бұрын

good video, esp on teaching to use the clamps, keeps the fingers away from the blade, its a bad habit and everybody gets distracted sooner or later and with circular saws, they are not forgiving at all. my dad twice cut his finger badly on a circular saw.

@ultimatehandyman 8 жыл бұрын

Thanks for the comment ;-)

@indianapwnz9328 8 жыл бұрын

I carry earplugs everywhere I go too, ever since I was married ;) My mitre saw is a screwfix £50 job, I've never managed to cut a nice fit off it only used it on me skirting boards :) next time I fit new ones tho I will be safer cheers :)

@ultimatehandyman 8 жыл бұрын

Ha Ha, I have to wear them 100% of the time when on site so I always have at least one pair in my overalls pocket. I normally also have a pair in my work pants at home as it saves me looking for a pair when needed. I'm not married but could still do with a pair when near the girlfriend ;-) Thanks for the comment

@AllSortsOfStuff58 8 жыл бұрын

Thanks for that. It hadn't occurred to me that I could 'trench' cut. I'll have to go and check if mine has that capability.......

@ultimatehandyman 8 жыл бұрын

You are welcome. Thanks for the comment ;-)

@drhmufti 8 жыл бұрын

I can vouch for the ear defenders as i have damaged lots of earrings and the wife aint pleased... Then again i am a morlock. Great video scary machines.

@Marour.5 8 жыл бұрын

Nice

@scottthomson700 6 жыл бұрын

Thanks for the vid. I am going to be using a mitre saw for home improvments. Dust extraction is a must so will be running a vacum with it. I thought about using the Brennestuhl Eco line plug bar with the foot switch to power on and power off both saw and vacum at the same time it would mean i could never make a cut without the vacum running as i proberbly would a few times.The foot switch would go just under the saw stand so i can step on it when saw is in position start saw and vacum starts at the same time. Have you used similer set ups before? and if so were there any problems with tripping breakers and the likes ?

@ultimatehandyman 6 жыл бұрын

Sorry, I have no knowledge of such devices. Thanks for the comment

@The-Bloke 8 жыл бұрын

Thanks a lot mate - very timely for me as my first mitre comes tomorrow. Quick question: you showed yourself wearing a visor over safety glasses. Is that necessary? Doesn't the visor already protect the eyes? Or do you always wear both at once?

@ultimatehandyman 8 жыл бұрын

I only wear the visor and glasses when cutting metal- just to be on the safe side. You have to be really careful with eye protection as the eyes are so easily damaged and injuries are life changing. The visor offers good protection but its still possible for debris to get behind it and hit you in the eyes, hence when cutting metal it's a good idea to wear both. Thanks for the comment ;-)

@The-Bloke 8 жыл бұрын

Thanks again. Sorry, just one final question! Looking at the eye glasses, I see there's multiple levels of protection. EN166 F, B and T. Most glasses/goggles are the basic level, F, and there's only a few that protect to level B. Is the lowest level, EN166.F fine for cutting metal on mitre saws/circular saws/etc? Enough protection for the sort of jobs you show on your channel? I was going to get B just to be safe, but it does greatly cut down the choice available, and I need ones that definitely fit over my prescription glasses and that's easier to find at level F.

@ultimatehandyman 8 жыл бұрын

I think F will be fine for most jobs, providing you also wear the visor when cutting metal. I normally just ask when I go in my local ARCO branch and they give me the best glasses to use and good advice to go with it.

@lss247 6 жыл бұрын

Nice tips. I thought we are not supposed to wear gloves while operating rotatory machines. Maybe you use because of the aluminium debris, but still. What is correct?

@ultimatehandyman 6 жыл бұрын

It depends, I wear them out of habit and because I have to wear them 100% of the time when I'm on site. If your hands are getting anywhere near the blade on a machine like this you should take a long, hard look at what you are doing! Thanks for the comment

@keithbucknall 8 жыл бұрын

Hi I was thinking of changing my mitre saw as it is too big and unsure of the evolution or the dewalt 774 what would be your recommendation? Great video and channel BTW.

@ultimatehandyman 8 жыл бұрын

Thanks Keith. It depends what you want to cut really, the evolution machine will cut wood, metal or plastic with the supplied blade or masonry if you install their diamond blade. The Dewalt will only cut wood or plastic (you might be able to get a blade for cutting aluminium). Some people have said that the evolution machines are not that accurate, but it depends what you are using it for. I normally only do stud work or decking and so it's fine but if you are making furniture etc. the Dewalt might be the better option.

@keithbucknall 8 жыл бұрын

+Ultimate Handyman thanks it will be DIY and garden/storage etc

@ultimatehandyman 8 жыл бұрын

Either machine should be fine for that ;-)

@HangPechHD 6 жыл бұрын

Good

@ultimatehandyman 6 жыл бұрын

Thanks for the comment

@IIGrayfoxII 8 жыл бұрын

Gotta love this guy He wastes building supplies which wouldn't be cheap to educate viewers

@ultimatehandyman 8 жыл бұрын

Yeah, some stuff is just off cuts though ;-)

@josephcroft4268 5 жыл бұрын

as i wear prescription glasses i think i would need a full face safety mask ,

@ultimatehandyman 5 жыл бұрын

Yes, I often wear a full face mask, especially when cutting metal with this saw. Thanks for the comment 👍

@JimAckroyd 6 жыл бұрын

I have the Rage 3 sliding mitre saw. I noticed that yours has holes in the upper part of the fence for attaching a longer fence. Is this an addition or do you have a later model?

@ultimatehandyman 6 жыл бұрын

There are a few different models Jim, the one in this video is the Rage 3 DB. They are all slightly different. Thanks for the comment

@MarkHopewell 3 жыл бұрын

I'm surprised mitre saw users don't use some form of glove as another form of PPE. Personally, I use chain saw gloves for some added reassurance and grip. Also, take out/switch off the mains/battery supply when doing any adjustments. These are just some of my own preferences because this type of machine frightens the life out of me! Whatever, S.A.F.E.T.Y F.I.R.S.T

@kurtinbloom Жыл бұрын

Hi, can l just ask for some advice. Just about to start a garden project using sleepers. What saw would you recommend plz

@ultimatehandyman Жыл бұрын

I’m afraid the Evolution mitre saws will not cut through a sleeper in one go, although you can flip the sleeper over to continue the cut. I have a 12” Dewalt mitre saw that will cut through sleepers in one go (if my memory serves me correctly)- kzfaq.info/get/bejne/bMV_jMV40bbdf4E.html Alternatively, you could use a chain saw, but it depends how square you want the cut end to be 👍

@kurtinbloom Жыл бұрын

@@ultimatehandyman thanks for that, much appreciated

@shirleybenedict8539 7 жыл бұрын

What kind of hold down clamps are you using?Where might I find them. The clamps that came with the dewalt are not user friendly at all

@ultimatehandyman 7 жыл бұрын

As well as the clamps supplied with the Evolution Rage three I think I used the Trend bar clamps in this video for some clamping- fave.co/2rSVDtM Thanks for the comment

@neilhuband995 8 жыл бұрын

Letting the blade come to a stop while still in the workpiece isn't a good idea. Doesn't matter when cutting wood, but it does when cutting something like steel or aluminium. The teeth of the evolution blades are carbide, which are very hard but also quite brittle. If a tooth, or teeth hit metal while the blade is coming to a stop, you are likely to chip them. Good channel though :-)

@Maxsdiscos 8 жыл бұрын

What is your 4 way extension lead in the corner of the garage powering?

@ultimatehandyman 8 жыл бұрын

Battery chargers. I have 2 Dewalt (XR and XRP), 1 dual voltage Milwaukee (12v and 18v) and a charger for my camcorder fixed to the wall in the corner.

@paul1116 3 жыл бұрын

I’ve just purchased a evolution 210sms+ and now I’ve got it on the Evolution stand the saw won’t go over to 45 degrees because mitre lever hits the stand brackets before the 45 degree mark. Help

@ultimatehandyman 3 жыл бұрын

Have you fitted the saw to the brackets the correct way around? I vaguely remember that if you fit the brackets the wrong way around, it will cause problems.

@paul1116 3 жыл бұрын

@@ultimatehandyman hi chap thanks for getting back to me. It was the height clearance from the mitre adjustment at the front. In my instructions it clearly shows removal of an orange Block but on my version it’s one piece solid. What I’ve done is put the rubber feet back on that they said remove and that’s given me the couple of mm that I needed. Love your Chanel thanks

@jackjill3205 7 жыл бұрын

How do you adjust the blade if not square on both planes? Thanks

@ultimatehandyman 7 жыл бұрын

I think this covers it- kzfaq.info/get/bejne/psdiqdSAnJipqIU.html

@claytongriffiths1884 3 жыл бұрын

Does anyone know if you can use different brands of blade on the evolution.

@ultimatehandyman 3 жыл бұрын

You can get different blades for this machine made by evolution, they make a stainless steel cutting blade etc. You could fit different makes of blade, providing it's the same bore and the blade is rated at the correct speed. (you can get reducing rings to use a larger bore blades on smaller bore machines) Thanks for the comment 👍

@nestserau 8 жыл бұрын

At least DeWalt claims that you must start the cut near the fence, fully depress the blade into the timber and then _pull_ the head across the material to complete the cut. I don't believe they don't know what they are writing, but at least my DeWalt mitre saw revolves clock-wise, so I don't understand why they claim I should pull it. It's indeed illogical. Makita on the other hand says to _push_ the head, but I don't know in which direction their blades revolve.

@ultimatehandyman 8 жыл бұрын

I have never heard that before! Where do Dewalt tell you to do this? All the people I have spoken to start the machine then push it towards the fence, not the opposite way around! Thanks for the comment ;-)

@nestserau 8 жыл бұрын

+Ultimate Handyman I've read that in the manual to my mitre saw DWS777. Let me quote it here: "Basic Saw Cuts Vertical straight cross cut (Fig. A, S) [...] 4. Take hold of the carrying handle 3 and press the guard lock up release lever 2 to release the guard. Press the trigger switch 1 to start the motor. _It is recommended to start the cut near the fence._ 5. _Depress the head to allow the blade to cut through the timber and enter the plastic kerf plate 11 ._ 6. _When the head is fully depressed, slowly pull it across to complete the cut._ 7. After completing the cut, release the switch and wait for the saw blade to come to a complete standstill before returning the head to its upper rest position. WARNING: • For some types of plastic profiles, it is advisable to follow the sequence in reverse order."

@ultimatehandyman 8 жыл бұрын

Thanks for this. Its the first time I have heard of this ;-)

@jimmytate7587 8 жыл бұрын

I bought a 12 inch compound sliding miter saw and thought it was used just as a radial arm saw. My first cut was a disaster. Pulling the blade into the wood I must have walked it up over the wood and it jumped across the workpiece. the right hand fence broke in half, the blade had a nicked tooth and I had a change of clothes due..............never pull the saw into the wood if you are using it as a slider......dangerous

@SuperWayneyb 8 жыл бұрын

He's a lemon lol 👍🍰🇬🇧😜

@garvielloken3929 6 жыл бұрын

What era defenders are you using

@ultimatehandyman 6 жыл бұрын

I wear ear plugs most of the time in the garage, but when I'm cutting metal on any of the Rage machines I also put a pair of 3M Peltor ear defenders on as well. Thanks for the comment

@germancarfan 3 жыл бұрын

Hi, which model is that one?

@ultimatehandyman 3 жыл бұрын

I think I used the Evolution Rage 3DB for most of the video. Thanks for the comment 👍

@bobetization 6 жыл бұрын

the sliding bar is too short, can you cut 2''x 14'' wood

@ultimatehandyman 6 жыл бұрын

Not unless you flip the workpiece over.

@bobetization 6 жыл бұрын

i better buy one more table saw for cross cut only, i think those designers didn't consider the size of commercial wood

@SuperWayneyb 8 жыл бұрын

What about the guy who cuts masonry on U tube with the normal blade on the evolution? 👍🍰😜🇬🇧

@ultimatehandyman 8 жыл бұрын

Well, not much you can say about that apart from you should pay more attention to the instructions ;-) *Thanks for the comment Wayne 👍*

@williamwhyte8539 5 жыл бұрын

.....how noisy is this machine ...will it annoy the neighbors in the room next door ?

@ultimatehandyman 5 жыл бұрын

It is noisy, especially when metal cutting. Thanks for the comment

@43bikeguy 8 жыл бұрын

Great vid but 'earin' what's that, ain't it jewellery?

@43bikeguy 8 жыл бұрын

Seriously though that Evolution was so quiet.

@ultimatehandyman 8 жыл бұрын

Its only quiet with ear plugs and ear defenders in real life ;-)

@JukeboxJake 7 жыл бұрын

10:37, he did not use a clamp and the peice was not up against the fence.....

@ultimatehandyman 7 жыл бұрын

You can't use the clamp when cutting compound mitres ;-) It's piece by the way!

@JukeboxJake 7 жыл бұрын

Ultimate Handyman. alright.... but while I have you here, will this saw cut through a 4×4, or about 3 1/2 inches?

@JukeboxJake 7 жыл бұрын

the evolution one?

@ultimatehandyman 7 жыл бұрын

It won't cut straight through a 4X4, you would have to flip the piece of timber over or get a mitre saw with a 12" blade. This will cut straight through a 4X4 in one go, but it's a lot more expensive than the Evolution- kzfaq.info/get/bejne/bMV_jMV40bbdf4E.html

@JukeboxJake 7 жыл бұрын

Ultimate Handyman ok..... thank you