How to Use a Wood Jointer I Budget Jointer Basics for Beginners

Рет қаралды 6,598

Күн бұрын

How to Use a Wood Jointer I Budget Jointer Basics for Beginners
In this video I will be covering some basics about a jointer. Its the first step in transforming a rough sawn timber to a ready to use board.
Titan Jointer video - • Reviewing the Titan Pl...
Titan Jointer fence upgrade video - • Titan Jointer | Planer...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #woodjointer
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Пікірлер: 48

@CasualDIY 2 жыл бұрын

Check out my other video on how to use a Thickness Planer, which is a second step in the process of transforming a rough sawn lumber to ready to use boards - kzfaq.info/get/bejne/f9Scl7CUt6uthKs.html

@mickypful 2 ай бұрын

Many , many thanks for this video. Just bought one in a garage sale and didn't even know what it was for. 😊

@CasualDIY 2 ай бұрын

Thank you for watching 👍

@johnmusgrave3179 2 жыл бұрын

Nice clear tutorial. Thank you!

@CasualDIY 2 жыл бұрын

Thank you for watching

@idlersdream826 2 жыл бұрын

Great video & good tips, this is one tool I don’t yet have. Will check out the thicknesser video later 👍.

@CasualDIY 2 жыл бұрын

Thank you for watching 👍

@freddyedwards67 2 жыл бұрын

Thanks for another great video. I got the same machine last week. Yet to use it. So an excellent tutorial for me. Cheers

@CasualDIY 2 жыл бұрын

Thank you for watching 👍

@mickmoyes7940 2 жыл бұрын

well made informative video Tomasz

@CasualDIY 2 жыл бұрын

Thank you kindly 👍

@geraldmatthews6244 2 жыл бұрын

Well done Thomasz, another great tutorial. Your always adding to my knowledge base, I'm most grateful.

@CasualDIY 2 жыл бұрын

Thank you for your kind words 👍😁

@paulhowell2235 2 жыл бұрын

Great Video. Just got the same jointer today so your videos are very handy 👌

@CasualDIY 2 жыл бұрын

Thanks 👍

@steveparkes1266 2 жыл бұрын

Great video and well timed Tomaz I’m picking the same machine up Friday from Screwfix 😃 thanks for sharing 👍

@CasualDIY 2 жыл бұрын

Hehe have fun with it and thank you for watching 👍

@anthonymellor174 2 жыл бұрын

Here’s a tip for the fence A B method kzfaq.info/get/bejne/eZ-jltOps9fGZGQ.html

@tommym936 2 жыл бұрын

I need to use mine, its been kicking about in the way in the workshop for a year

@CasualDIY 2 жыл бұрын

Hehe I got few tool like that 😁

@TheBluealan2000 2 жыл бұрын

Another great video mate, thank you. I think it is time for me to invest in a similar tool

@CasualDIY 2 жыл бұрын

Thank you. This is a very entry tool but the next one up is so much more expensive that it's just not feasible for most DIYers to get. But you can still get done decent results with it👍

@MCsCreations 2 жыл бұрын

Really excellent tips, Tomasz! Thanks! 😃 I bought a 12" thicknesser and planer, but I'm still a bit scared to use it. 😂 I'm going to look for someone around who could help me with it. Anyway, stay safe there with your family! 🖖😊

@CasualDIY 2 жыл бұрын

Thank you. No need to be scared of it, have respect for it and you will be just fine. Shallow passes, use push blocks and it will be fine

@johnriordan288 2 жыл бұрын

Hi Thomas great video as always I have one with a couple of years but never used it afraid of it but will have to use it soon. The stand you made for it do you have a video on it I would like to make one of them ? Thanks

@CasualDIY 2 жыл бұрын

Thank you, yes got a video here is the link to it kzfaq.info/get/bejne/ha6Jpcely72remw.html

@corrosive72 2 жыл бұрын

Does grain direction matter what why you run it threw??

@CasualDIY 2 жыл бұрын

It's best to run it with the grain as on some occasions if you run it against the grain you may get some tear out in fibers

@katabrontes 2 жыл бұрын

Hi Tomasz, Helpful introduction. I like your suggestion to retract the guard a bit so you can move the push blocks evenly across the cutters. I find it quite awkward doing this with guards across the whole width of the blade so you need to lift the leading block over the guard at the start of the cut. Looking at your ruler at the begging it looks as if your infeed table is sloping slightly down at the end furthest from the cutters. Does this matter? I hope the gas keeps coming! Mike

@CasualDIY 2 жыл бұрын

I think it was just the camera. But even if, you are putting pressure on the outfeed table so it should not matter that much. Well according to our government we got gas 🤔

@johnallport-yv8hp Жыл бұрын

Hi I've just bought a thicknesser but has no book what I wanted to know is what is the purpose of the handle on top for

@CasualDIY Жыл бұрын

Which handle? Did you get this Titan? There is one on the side that is to lock the infeed table

@johnallport-yv8hp Жыл бұрын

Hi can anyone help me with a problem I have bought a thicknesser planer and there are two handles I know one is for the depth of cut but what is the one on top for ?

@johnallport-yv8hp Жыл бұрын

@@CasualDIY hi in your video on the top of your thicknesser you have a red handle I have the same what is the handle for

@CasualDIY Жыл бұрын

@@johnallport-yv8hp on this Titan or the Metabo? Titan got only yellow parts

@johnallport-yv8hp Жыл бұрын

@@CasualDIY thanks for your reply I have a thicknesser planer it's called Sip it has the thickness handle on the side and in the top section it has leaver that moves back and foward I don't know what it's for ?

@richardd9867 3 ай бұрын

Hi. When I push the wood along the jointer blades the front end and back end of the wood is cut by the jointer blades but the center of the wood does not touch the blades. Can you advise how to fix this issue please?

@CasualDIY 3 ай бұрын

Silly but obvious question, is the board not bowed? If the machine is cutting then its more of a technique used or the board itself is bowed, twisted etc.

@richardd9867 3 ай бұрын

Thanks for the fast reply I really appreciate it. No the board is fine just a little rough. I measured the board width and it's the same measurement along the whole board.

@richardd9867 3 ай бұрын

I have a feeling the outfeed table is not level and I don't think that can be adjusted, would that cause the issue?

@CasualDIY 3 ай бұрын

@@richardd9867 well put a long level, get the infeed table up and see if it's is

@thomaspako 2 жыл бұрын

New workshop?

@CasualDIY 2 жыл бұрын

Newish, been here just under 1 year 👍

@henrymaxwell3434 Жыл бұрын

Thank you so much for the vid, so have you seen Woody Hyezmar's woodworking “Bible” yet? I think videos are really useful because of the visuals, but you can still get his bible before it’s published, just try go’ogling his latest.

@CasualDIY Жыл бұрын

So another "woodworking plans" scam....