you answered all my questions. Good video. Thanks.

The best, most useful, and helpful to understand the difference between the products and choose the right one. I appreciate you, sir. I have watched many videos on youtube, but none of them could make me convinced to choose a CA glue with confidence. Thanks again.

Thanks! Short and to the point and very informative as well!

Nice Job!!! I learned quite a bit as you answered some of my most pressing questions. Thanks for posting this.

very informative video with easy simple way, thank you.

Thanks, great informative video! I just received my first batch of Starbond CA in the mail so am excited to start using it on my projects.

Very helpful explained a lot of what I didn’t know or realize

what great information and explanation. thank you

This is so informative. Thank you.

Good video. Just what I needed.

Great explanation. Thanks.

Very helpful. Great content. Thanks

Great video, can i use ca for fixing cracks on top of the crook of a walking stick? Thanks much

excellent presentation of key information

Does the spray activator affect the ability to apply a stain or finish, if some was to get on the finished faces of the wood? Thx

Excellent tips!

Great information. Thanks for sharing

Very informative, thank you

I put eyedrops in the fridge. There was a local case a person mistaken superglue as eye drop. The result was tragic.

Very good information, thank you

thank you so helpful, useful and handful information god bless

Very helpful!! Thank you.

Can this be used on damaged MDF to “seal” the roughness so that wood filler can be applied?

Acetone..wow..nice video

Anything stronger then this stuff? I'm trying to glue a relatively strong magnet to the back of my phone case which is rubber and super glue didnt work at all. 😕

I have been turning pens made out of acrylic pen blanks will it work for that?

Thanks for explaining what CA glue is. You mentioned that that the accelerator reduces time by ten fold. You kept your elbow on the pieces of wood for about sixteen seconds which means 160 seconds or nearly three minutes in real time. I would rather use it without accelerator as that would only take maximum thirty seconds and save the cost on the accelerator.

I just discovered using CA Glue with accelerator for working with wood on jobs. I've known about Super Glue since the 70's when that guy put some on his hard hat, stuck his hard hat to an I-Beam, and hung there kicking his feet. I had never seen CA Glue and Accelerator until I did my last job, and my boss used Stick Fast and Stick Fast Accelerator. I thought the stuff was amazing so I went to buy some online and discovered that there were other brands of CA Glue. In the course of researching CA Glue, I found that a lot of people chose Starbond over Stick Fast. They claimed that Starbond was the "Gold Standard" for CA Glue. Can you discuss the differences? Why do these people prefer Starbond? What do you prefer? Thanks

The curing ingredient in the accelerator is N, N-Dimethyl-p-Toluidine, NOT acetone. The 99% acetone is just a solvent/delivery medium, it's the 1% or so N, N-Dimethyl-p-Toluidine that's important.

Not all Super glue are equal by any means, due to the greed for profits most are cheap watered down diluted rubbish with very little Cyanoacrylate! best super glue ive used is Permabond 102

great, I am going to build a 2 story house frame structure with CA glue

A thinner offering? Is it glue or wine

I’m considering using this CA glue to attach driftwood for my aquarium, do you know if it is safe once is cured, is it inert when dry? Thank you!

Super-glue accelerator, for people who haven't got 18 seconds to waste.

If first came out in Canada as Crazy Glue.

Is this a replace for wood glue to join wood planks together

Sir it safe for chopping board, this not toxin?

How much would you trust CA Glue to fasten two pieces of 3/4 inch wood side by side

Is CA glue "food safe". Does CA glue deteriorate with heat? Could you use it for cutting boards?

are all CA glue same and safe for epo plane foam?

i sometime have too much glue dripping from the tip. how do i clean that off? i find that the glue will just glue to itself. either the top will glue to the bottle or the opening is glued shut. i tried cloth, which was a bad idea. i tried my finger, which it still closed the opening. i tried opening with a bobby pin, but the glue just glue it to it self and it gets worse and worse every time i tried using it. i get like the max of 3 uses every time i use it. which is about half of a 1 oz bottle before i have to just throw it away, because it's to hard to reopen the top.

If you keep it in the refrigerator, will it last indefinitely?

how many ounces is your bottle of ca glue?

Good video! If CA glue is same as crazy glue, than why do many rc model plane instructions tell you not to use crazy glue and to only use foam safe CA glue for models that are made of EPO or EPP material?

can u stic ruber to a plastic

What is the life span of the glue, once they are opened? Thx

Baking Sosa is the cheapest and best accelerator

🙂

Howdy!

Should’ve busted it apart to show if the wood failed or the glue did. Next time.

Accelerator is pretty expensive. It's much cheaper to just buy nail polish remover or a pint of acetone at Walmart. Accelerator is nothing but acetone. No other additives. And then you can use it to separate your fingers when you glue them together. It seems strange it will set the glue and also dissolve it, but accelerator is acetone.

pronounced like cyan (the color) and acrylic (the plastic) cyan-o acryl-ate

Cy-ono-acryl-ite. Was that the first time you tried to pronounce it? I'm just giving crap. lol 0:25

The fumes are not healthy or they just stink (smell)?

Why do people use the term "CA Glue"? CA is an acronym for "Cyanoacrylate adhesive". 'Glue' becomes redundant. They are not all the same, as most hobby enthusiasts seem to think. There are several different base monomers used, i.e. Ethyl, Methyl, butyl and several others. The stabiliser ingredient in these adhesives is a weak acid. This stabilising acid is neutralised by the moisture on the surface of the substrate, which is usually alkaline by nature - but not always. Some woods plastics and plated metals are by nature slightly acidic. These are the materials you will find a little more difficult to bond. It's at this point that many people reach for the 'surface accelerator', or 'kicker' to promote curing. There are specific CA's classed as 'SI" or "surface insensitive" grades which will perform well on these substrates. Using a 'kicker' with a CA will often result in a less than perfect bond. If you drive the cure process too hard and fast, then polymerisation will suffer. The curing of a CA is a polymerisation process, not a drying effect. Solvent based adhesives cure by losing their solvent, or 'drying out', a process similar to paint drying. The term 'Superglue' was originally a trademark of a leading adhesives manufacturer. Unfortunately, someone in their marketing department used the term as a 'generic', similar to the word 'hoover'. Consequently it became a term which anyone could use from then on. The fumes which you detect when using a CA are 'lachrymatory' i.e., they will make your eyes water. They may also upset some asthmatics (like me), but they are not dangerous to the point of causing any lasting damage. These fumes are volatile CA monomers escaping from the bondline. The effect is called 'chlorosis' or bloom.They will leave a nasty mark on plastic and some wooden surfaces that can best be removed by mechanical means (sandpaper). Alternatively, there is a version of CA which is classed as 'low odour, low bloom'. These versions are manufactured using a higher molecular weight monomer, which is less volatile and remains within the bondline long enough to cure in place. Another simple method of avoiding the problems of fuming and bloom is to place a small desk fan near the bondline and gently blow the fumes away.

" What is CA Glue, it is a glue made with *cyanoacrylite* 0:23 " the word is cyanoacrylate not cyanoacrylite.

2:00

0

Wait hold on can you speak any slower. You going to fast I don’t understand