Brilliant tutorial very very well explained thank you for takin time to share this

Thank you, thank you, thank you. My mum has one of these.. she is 102 next month. Her house this week has been at 29 Celcius! … I now know how to re-set it.... and WOW... A CHILD LOCK for my mum!

Very informative video. Thanks 👍🏻

excellent video, clearly explaining the functions to a 'simpleton' like me....thank you

Just what i needed thank you

Thamk you so much for your VDO , even English is not my first language but I can understand and work through your advices 🙏

thank you for this.

Thankyou sir,,MOST HELPFULL😊

Love you, you really made it easy for me thank you

Hi, how many timer settings does it allow on and off? I saw three sets in the video. Can it do 6 on and 6 off? Thanks.

Thanks for the video. The time on my boiler is correct but not on the thermostat. I have looked over and over but I have no idea how to correct this, do you know how to solve this?

Hi I’ve been thinking about getting a nest or hive system for a while but thought it would be a complex task. After watching a few KZfaq videos, I’m convinced it should be quite easy but the system in my house is slightly different to things I’ve seen on here. The house was built in 2013 and was installed with a very complex Danfoss (hence the need change) controller near the boiler. It is a pressurised water tank type system. There is a separate upstairs and downstairs heating zone valve and a hot water valve. The downstairs has a non adjustable thermostatic sensor which is set by adjusting the controller. The upstairs has another programmable thermostat (looks very similar to the controller). I don’t want to have to buy 2 new systems to control the upstairs and downstairs. I suppose if I buy one system, I could parallel both zone valves in the wiring centre and remove the upstairs stat and wiring? The boiler is downstairs in the kitchen and the wiring centre is upstairs in the cupboard with the water tank and valves. I don’t think the NEST system would work for the 12v dc stat supply as I’d have to run a cable all the way back to the kitchen to pick up the supply for it. As the hive seems to be a stand alone , am I correct in thinking this should be the one to buy?

Hey. So I've just moved in to a house and the previous owners have this system fitted. Ive switched to octopus energy so will this still work? Also, does having this fitted make the pysical controls redundant? By this I mean the boiler has the water and heat twist controls on the front (low to high) and each radiator has its own twisty plastic knob on the side (goes from * to 6). Do you just max out all the physical switches on the boiler and the radiators then control everything from the hive controler? It's a bit confusing. Hope that makes sence

Awsome sir😊😊😊

Hi Pete, can I replace my Drayton Digistat 3 with the Hive system?

British gas installed this (just the control) today and we set the timer for 6am to 9pm. It's currently just after 10pm and the radiators are still piping hot. Is that normal? How long does it take for the heating to go off or is there a malfunction somewhere?

Thank you so much... you're the first video i've seen actually explaining the functions without using the app... very helpful... thanks again

Holiday mode is having issue, I cannot set or reset it to a future date. Even in the video the system did not set that to the future date.. Whats the work around, desparate to know as my hot water has stopped coming.. Thanks

Can’t get my hive app on iPhone 6 to pair with thermostat. Batteries working, flashing amber, still no joy. Any tips?

Do you have thermostats on your radiators?

Hello, I have one of these installed recently and I don’t have the app yet so I only use the controller, When I set the heating off, it goes back into manual mode next morning automatically with set temperature set around 6 degree c. Is that normal?

Do I leave it in the room I’m in. Not in the hall where it’s cooler

Thanks for this ,my Nest thermostat only allows 1 hour minimum intervals. Can you please confirm if the Hive allows for shorter 30 min schedule ?

How do i change time a day on my hive thermostat? I only have stand alone hive thermostat

Can tell this guy is a heating engineer; when he sets the program he sets the ‘get home from work’ at 5pm 😂😂😂

fantastic video thank you. I care for a disabled lady and she has a hive I've got the gist of working it but when I turn the target temperature up and press the tick the actual temperature doesn't come up to match it. the actual temperature was sitting at 18 all day, any suggestions please. I had British Gas out as I thought it was faulty and they said it was fine!!!! help

Does anyone know how get rid of "ready by" without using the App please?

Hi do I need the hub with this I won't be using the app

Hi pete great video Thankyou I’m new to hive I just have a little problem with the boost I increased the boost from 1 hour to 5 hours I pressed the green tick at the time it was very cold that day . But now when I want to use the boost for one hour it now goes on 5 hours how do I go back to one hour . Sorry I get so confused Thankyou Karen x

Read all the blurb but one thing isn’t clear to me. Is it wifi only or will it work through my phone away from the house? Sorry if it’s a dumb question but nothing I can find clarifies this.

Neighbours in their 80s have just had one fitted & they haven’t a clue how to use it, no manual just a quick demo from installer 🙄

What model is it

Great demonstration, wish it was in slo-mo though. Why am I so scared of it 😉

What do I need to do to get one of these? I know absolutely nothings about heatings and that sort of stuff, I have a basic thermostat on my wall and some sort of gas combi boiler. Do I only have to buy this little device? I'm clueless about this stuff lol. Can anyone explain what I need to do from start to finish to get one of these working in my house?

Please help. Two days with new hive thermostat (manual), but when I want to set the heat to come on in the morning, it won't go earlier than 6.30am and I need it too come on at 2am (I do shift work). Any ideas please?

The dial has gone stiff and I can’t push it to select either, any ideas why it’s gone like this?

Hi mate does router needs to be in same room as boiler room?

Can the display time be increased to stay on for a bit longer ?

How to connect it to WiFi?

I don’t have the resume button

Does anybody know why my one says it's really warm in my house when it's actually really cold? It's about 13° inside the house but the thermostat says 24. It always says it's really warm so when I want the heating to come on, I have to turn it up to some crazy number like 26° just to get some warmth. It's nowhere near a radiator.

How does boost function work please ?

I never had a thermostat. It says room temperature is 21 when heating is off, if I set up target 20 degrees and timer to start automatically in 2 min, will it start anyway? Despite room temperature is higher then target??

No need to press the knob when manually ajust heart. It will auto start

Got one of these recently with my new boiler fitting from British gas. It replaced my timer and old thermostat. Ridiculously over complicated, could set up the old system in about two minutes, but this thing is mind bogglingly complex with no user guide. Cannot get it to do what I need and the heating is now on all of the time which I assume suits British Gas because they can now charge me about a million pounds a month to my gas bill.

Linked to Forgewood

mines working backwards

No idea how to use this thing after watching this. Stopping one schedule and moving to next one makes no sense